| dc.contributor.author | Noorsyakirah, Abdulah | |
| dc.contributor.author | Shamsul Baharin, Jamaludin, Prof. Dr. | |
| dc.contributor.author | Mohd Afian, Omar | |
| dc.date.accessioned | 2012-11-14T08:52:07Z | |
| dc.date.available | 2012-11-14T08:52:07Z | |
| dc.date.issued | 2010-10-16 | |
| dc.identifier.isbn | 978-967-5760-03-7 | |
| dc.identifier.uri | http://dspace.unimap.edu.my/123456789/21787 | |
| dc.description | International Postgraduate Conference On Engineering (IPCE 2010), 16th - 17th October 2010 organized by Centre for Graduate Studies, Universiti Malaysia Perlis (UniMAP) at School of Mechatronic Engineering, Pauh Putra Campus, Perlis, Malaysia. | en_US |
| dc.description.abstract | Injection molding of CoCrMo materials was
developed in order to investigate the processing
characteristics of injection molding of CoCrMo alloy
for medical applications. The processing technique
was based on or modified from the used of 316L
stainless steel. This study is concentrated on
microstructures evaluation during debinding. The
feedstock was injection molded using vertical injection
molding machine and the following debinding
processes were done by solvent extraction to remove
palm stearin (PS) in heptane at 60oC for 5 hours prior
to thermal pyrolysis at 450oC to decompose the
polyethylene (PE). | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
| dc.relation.ispartofseries | Proceedings of the International Postgraduate Conference on Engineering (IPCE 2010) | en_US |
| dc.subject | CoCrMo | en_US |
| dc.subject | Injection molding | en_US |
| dc.subject | Debinding | en_US |
| dc.subject | Polyethylene (PE) | en_US |
| dc.subject | Palm stearin (PS) | en_US |
| dc.title | Debinding study of injection molded CoCrMo alloy powder using palm based binder system | en_US |
| dc.type | Working Paper | en_US |
| dc.publisher.department | Centre for Graduate Studies | en_US |
| dc.contributor.url | syakirah@sirim.my | en_US |
