The term microfibril angle, MFA in wood science refers to the angle between the direction of the helical windings of cellulose microfibrils in the secondary cell wall, S2 layer of fibres and the long axis of the cell wall. ...

Functionally graded materials were fabricated using Hydroxyapatite (HAP) and F75 cobalt alloy. Both of these two materials are important in creating biomaterials that is compatible to the human tissue and at the ...

Zinc layered hydroxide (ZLH) is a family of layered metal hydroxide (LMH) which can be represented by the general formula, M2+(OH)2-x(An-)x/n.mH2O, where M2+ is the metallic cation (e.g., Mg2+, Ni2+, Zn2+, Ca2+, Cd2+, ...

Wollastonite was synthesised via solid state reaction using Malaysian limestone and silica sand as the raw materials. It was synthesised at 1100oC, 1200oC, 1300oC, 1400oC and 1450oC. The products obtained were ...

Nowadays the waste PCBs increasing sharply proportionally the number of personal computers which is 5.7 million in 2005 and the predict amounts, it will be increase to 11.5 Million in 2010 (Unit Perancangan Ekonomi, ...

A comparison study on deposition technique between spin coating technique and new route coating which is inkjet printing technique have been studied in this research paper. The FTO material for both deposition techniques ...

Cobalt-based alloys have been widely used in biomedical application. In this research, various compositions of Co-Cr-Ni alloys were developed and produced by powder metallurgy route. This study was also aimed to investigate ...

Ceramic products with crystalline structure on its body give an artistic effect. The usage of zinc oxide which acts as a flux material has a beneficial effect in many colored glazes amongst which is crystalline ...

SiC added MgB2 polycrystalline samples were synthesized at low (650°C) and high (850°C) temperatures in order to study the sintering effect on the phase formation and superconducting properties. The MgB2 bulks with ...

Zn alloy casting industry using green sand molding is increasingly becoming to very competitive circumstance, due to the various casting methods such as die cast, sand mould and so on with the recent coming of the ...