Search
Now showing items 1-10 of 10
Review of study to improve dye sensitized solar cells performance by TiO2 thickness and extract mangosteen pericarp as sensitized
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)
Based on the process and observation of this paper electrical energy conversion efficiency in dye sensitized solar cell performance is strongly influenced by the dye and the thickness Titaniuam dioxide. Both of these items ...
The impacts of stator outside diameters on induction motor nameplates: Analysis by using a finite element
(Institute of Electrical and Electronics Engineers (IEEE), 2010-12-13)
Design stimulation by software is important in order to save money and time. This paper is using stimulation software, which is a finite element method, to analyze the stator outside diameter impact on rated current, horse ...
The impacts of stator materials on induction motor nameplate parameters for high performance
(Institute of Electrical and Electronics Engineers (IEEE), 2010-12-13)
Core materials and magnet wire sizes were analyzed in order to find out the impacts on nameplate for high performance motor. Stack length and back core iron depth of stator geometry design are the parameters involve in ...
Predicting the localized flux distribution in three phase induction motor between different stator slot size
(Institute of Electrical and Electronics Engineers (IEEE), 2011-06-06)
A three phase induction motor differences of stator slot size is investigated in terms of its localized flux distribution. The search coil induced voltage method is used to analyze the flux distribution in the stator core. ...
Clear sky global solar irradiance on tilt angles of photovoltaic module in Perlis, Northern Malaysia
(Institute of Electrical and Electronics Engineers (IEEE), 2011-06-21)
The performance of a photovoltaic (PV) is highly influenced by its orientation and its tilt angle with the horizontal, due to the fact that both the orientation and tilt angle change the amount of solar radiation reaching ...
Potential of solar radiation and wind speed for photovoltaic and wind power hybrid generation in Perlis, Northern Malaysia
(Institute of Electrical and Electronics Engineers (IEEE), 2011-06-06)
This paper presents analysis of the solar radiation and wind speed characteristics in Perlis, Northern Malaysia for the year of 2006. The characteristics consist of daily and annual mean solar radiation and wind speed. ...
Parameter determination of 0.5 hp induction motor based on load factor test - A case study
(Institute of Electrical and Electronics Engineers (IEEE), 2011-06-21)
The load can influence the efficiency of the induction motor. Even if the load has higher or less load factor, it can reduce the efficiency of an induction motor by several percentage. By knowing this, it is important that ...
Core loss measurements of three phase AC induction motor
(Institute of Electrical and Electronics Engineers (IEEE), 2010-06-23)
Core loss measurements at the field level for AC induction motor have been described. The standard requirements is the conventional no-load test to measure the “rotational losses” (sum of the core, friction & windage losses) ...
Optimization of current total harmonic distortion on three-level transformerless photovoltaic inverter
(Elsevier Ltd., 2012)
This paper presents a new topology of three-level transformerless photovoltaic (PV) inverter. It consists of three main circuits; they are a pulse driver circuit, a full bridge inverter circuit and a power factor correction ...
Improvement of induction machine performance using power factor correction
(Institute of Electrical and Electronics Engineers (IEEE), 2011-06-21)
In this paper, a new approach to improve power factor (PF) and reduced total harmonic distortion (THDi) is generated by a single phase induction motor is proposed. By designing the necessary technique and methodology, the ...