| dc.description.abstract | The sorption of two reactive dyes, namely Remazol Brilliant Blue and Orange G Pure, on
activated carbon, has been studied. Three effects on adsorption of dye by activated carbon had
been studies which are flow rate of dye when entered the column (5, 10, 15 ml/min) when bed
height and initial concentration are constant (15 cm and 200 mg/l), initial concentration of dye
(100, 200, 300 mg/l) with bed height (15 cm) and flow rate (5 ml/min) and bed height (10, 15, 20
cm) with constant flow rate (5 ml/min) and initial concentration (200mg/l). The removal of dye
was faster in initial stages, gradually decreasing pattern and became constant after equilibrium
was achieved. The initial dye concentration of the effluent is important since a given mass of
adsorbent can only adsorb a fixed point amount of dye. Therefore, the more concentrated dyes,
the smaller is the volume of effluent that a fixed mass. Effect of initial dye concentration in the
inlet flow is one of the limitation factors and main process variables. The column experiments
using activated carbon showed that adsorption efficiency increases with increase in the influent
concentration and bed depth and decreases with increasing flow rate. The results suggest the
highest bed height (10cm), lowest flow rate (5ml/min) and lowest initial dye concentration
(100mg/l) provide in the most favorable outcome | en_US |
