School of Environmental Engineering (FYP): Recent submissions
Now showing items 61-80 of 437
-
Regeneration of spent activated carbon from wastewater treatment plant application
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)The field spent activated carbon from the wastewater treatment plant application is vital to be regenerated for the reduction of environmental pollution, contribution of economic benefits and the preservation of the natural ... -
Prediction of Particulate Matter (PM₁₀) concentration in industrialized area in Malaysia
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2016-06)The aims of this study is to improve the prediction model of Multiple Linear Regression (MLR) by combining with the Principle Component Analysis (PCA) to predict future (next day, next two-day and next three-day) of the ... -
Contribution of greenhouse gasses from soil under application of fertilizer in carbon foorprint assessment : the case study of Felda Mata Air Harumanis plantation, Perlis
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Carbon Footprint is a concept to assess the level of greenhouse gas emissions caused by the human activity. This concept aims to understand and evaluate the human activities to reduce greenhouse gas emissions into the ... -
Characterization and properties of HDPE/NBR/RHP composites with NAOH treatment
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)The increasing of rice husk production has become an issue when open burning is strictly banned due to environmental reasons. Besides, poor interfacial adhesion between natural reinforcing fillers and polymer matrix is ... -
Pb(II) Removal from Aqueous Solution by using Chemically Treated Rice Straw
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Rice straw was used as an adsorbent for the removal of lead ions from aqueous solutions through batch equilibrium technique to find out the effectiveness of lead removal. From the characterization of adsorbents by using ... -
Influence of metrological factors on variations of particulate matter (PM10) concentration during haze episodes in Malaysia
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Particulate matter (PM10) is one of the major problems of air pollution around the world due to its ability to cause the adverse effect to environment and human health. Therefore, it is very important to develop PM10 ... -
Characterization and properties of polypropylene (PP) / acrylonitrile butadiene rubber (NBR) / palm kernel shell (PKS) composites with PPMAH compatibilizer
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)The effects of polypropylene maleic anhydride (PPMAH) as a compatibilizer on the properties of polypropylene (PP) / Acrylonitrile Butadiene Rubber (NBR) and Palm Kernel Shell (PKS) has been studied. Six different composites ... -
Comparative study on the solarphotocatalytic degradation of Benzene substituted organic compounds
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)One of the major problems in the industrial wastewater treatment plant is the presence toxic organic compounds in wastewater. The wastewater constituent contains benzene substituted organic compound which contributes to ... -
Investigation of organic and phosphate amendments in remediate heavy metal in polluted soil
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)This study was held out on by bioremediation technique to remediate heavy metal that is from Harum Manis farms. This research is conducted in conjunction to examine the effectiveness of organic and phosphate amendments ... -
Spatial and temporal characteristics of particulate matter (PM 10) concentration in Peninsular Malaysia during the dry season
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Particulate matter is the most prevailing air pollutant in Malaysia. PM10 is one of the air contaminants that can be harmful to human health. The descriptive statistics was analyzed to find the measure tendency and measure ... -
Improvement of fire retardant properties of natural fiber used in noise adsorbtion panel by synthetic additives
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Fire safety has become an issue in our country. We continue to use flammable products like plastics and wooden furniture without knowing the actual risk. Thus, fire resistant materials are widely implemented, but still, ... -
Decolourization effects of reacyive black 5 textile dye wastewater by using O3 and O3/H2O2 process
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-05)The presence of dyes in various industrial effluents is a major problem due to their adverse effect to many forms of life. Wastewater containing dyes presents a serious environmental problem due to its high toxicity which ... -
Characterization of rainwater from rainwater harvesting in relation to its usage for human consumption
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)The practice of rainwater harvesting is such providing both potable and non-potable supply of water, and it was applied then to meet the higher demand of world population nowadays, moreover among the communities in rural ... -
Characterization and properties of HDPE/NBR/PPF composite with/without ᵞ - APS coupilng agent
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)The effect of γ-Aminopropyltriethoxy Silane (APS) as coupling agent on the properties of High Density Polyethylene (HDPE)/ Acrylonitrile-Butadiene Rubber (NBR)/ Palm Pressed Fibre (PPF) composite were studied. The High ... -
A study of methane reduction in compost based landfill cover in Malaysia
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Landfill gases (LFG) emission especially methane (CH4) and carbon dioxide (CO2) has become a serious issue nowadays through the ability in trapping radiation that lead to the global warming effect. A laboratory scale ... -
Electro-reduction of carbon dioxide (CO2) into formic acid using rotating disc electrode (RDE)
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)This paper aimed to prepare tin as the cathode material in the electro-reduction of CO2 into formic acid using RDE and at the same time to characterize it. Tin was deposited onto the surface of a glassy carbon electrode ... -
The effect of epoxy resin compatibilizer on polypropylene(PP)/recycled acrylonitrile butadiene rubber(NBRr)/banana skin powder(BSP)
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Epoxy Resin (EP) was use as a compatibilizer on the properties of polypropylene(PP)/recycled acrylonitrile butadiene rubber(NBRr)/banana skin powder(BSP) composites to determine the characterization of composites with ... -
Characterization and properties of PP/NBR/EFB composites with PPMAH compatibilizer
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)The Empty fruit bunch (EFB) has become the solid waste problem in Malaysia’s agricultural sector abundantly. Besides, poor interfacial adhesion between natural reinforcing filler and polymer mater is the most vital issue ... -
Application of the Taguchi's design of experiment in optimization of metal assisted chemical etching process
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Design of experiment (DOE) using statistical methodology to analyze data, predict process and product parameters. In the Design of Experiment, Taguchi method is one of the method available for optimization process. It ... -
Preparation and characterization of activated carbon from the sea mango (Cerbera Odollam) for methyl orange removal
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Sea Mango (Cerbera Odollam), a non-edible fruit which is abundantly available in Malaysia was transform into a potential low-cost activated carbon for removal of Methyl Orange (Mono Azo dye) from textile wastewater. The ...