School of Environmental Engineering (FYP): Recent submissions
Now showing items 461-480 of 640
-
Production of lightweight aggregate from clay
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)The present study covers the production of lightweight aggregates using clay was investigated. The main aim of this research is to produce lightweight aggregates. Clay is the main raw material used in this study because ... -
Study on interlocking concrete block pavement (ICBP) made with sugarcana bagasse
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)The recycling of solid waste in civil engineering applications has undergone considerable handling cost of brick production. Many types of aggregates available that are closed a lightweight, and theory properties of ... -
Interlocking block beam: Flexural strength
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Interlocking block beams have been used as lintels to replace reinforced concrete beams in interlocking block construction. Normally mortar was used widely as the filler to hold the reinforcement and the block units to ... -
Interlocking concrete block pavement (ICBP) made with coconut fiber
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-04)Lately there are many new products that are produced using waste materials, especially to produce construction materials. Use of other waste to avoid pollution of the environment can also reduce costs. Since 1984, Interlocking ... -
Behavioral study of steel transmission tower toward wind loading using STAAD.Pro V8i
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)With today’s developments of power transmission systems, a huge number of structural steel towers to support in the connection of power cables are being constructed in Malaysia. However, wind is one of the most important ... -
Meteorological and geological considerations for ground sink heat pump application
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)In venture to introduce a technology where giving a security, environmental sustainability, and economic well-being of the nation, a buildings where present one of the best opportunities to economically reduce energy ... -
Characteristic of particulate emission (PM10) at residential area
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)The objective of this study is to monitor the particulate matter (PM 10) around selected residential area at six locations around Perlis. The particulate matter (PM10) was collected by using Tas Minivolume E- Sampler on ... -
CO2 absorption using amine solution
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)In this thesis research, a study was conducted to investigate the absorption of carbon dioxide using amine solution which is methyldiethanolamine (MDEA). Carbon dioxide (CO2) is a naturally occurring chemical compound ... -
River sedimentation based on landuse type
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)A study was conducted to investigate the sedimentation of rivers which can reduce the water quality and river storage in Perlis. As the land use can get changing and effecting by the agricultural activity, it will affect ... -
Tracer identification in water sources near landfill as ideal candidate for landfill monitoring
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)The surface water and ground water sources can be contaminated due to nearest landfill activities. Consequently, the water sources contamination associated with the landfill site have not been fully study. Therefore, it ... -
Properties of modified sand brick using bagasse
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)An extensive variety of such additional materials from waste has been used or investigates in brick making to improve the brick production whether in their costs, manufacture handling, strengths, and other major properties ... -
Mapping the effect of paddy field to total suspended solid
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Perlis is one of the states that most of the landuse is paddy field. The objectives of this study are to determine the impact of paddy field that changes the concentration of Total Suspended Solid (TSS), to analyze TSS on ... -
A case study on clinical waste management and disposal and value of incineration
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)A case study that had involved analysis of clinical waste, separation according by month and survey had done at Hospital Tuanku Fauziah, health clinic (Kangar, Arau and Kuala Perlis), and private clinic (Klinik Faizah, ... -
Physicochemical optimization of granular sludge formation in rubber industrial wastewater
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Aerobic granular sludge technology is a novel and promising development in the field of biological wastewater treatment where it develops granulated sludge without any additional of supporting carrier material. The use of ... -
Waste as an alternative fuel
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Solid waste is produced and accumulated due to human activities. The waste will bring about severe environmental problem unless an appropriate solid waste management system is applied. In this context, it is reasonable to ... -
Properties of lightweight foamed concrete with replacement of concrete sludge aggregate
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-06)The need to find a cheap alternative building materials and can be used by the public in developing countries and the need to use the waste in a safe condition has attracted engineers and the community to explore the ... -
The effectiveness of selected electrode in electrocoagulation process in treating palm oil mill effluent (POME)
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Palm oil mill effluent (POME) from industrial activities may affect environment and human health due to high amount of Biochemical Oxygen Demand(BOD), Chemical Oxygen Demand (COD) and Total Suspended solid (TSS). Many ... -
Assessment of low-rise reinforced concrete building in low seismicity region
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)A literature review has been conducted aimed at improving the general understanding of the seismic response of concrete buildings in low-to-moderate seismicity regions. This paper summarizes and discusses the existing ... -
Identification of flood potential area in river sedimentation monitoring
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012)The study is about the flood potential area which focuses on river sedimentation by using Geographical Information System (GIS). The scope in this river sedimentation study is soil erosion which causes suspended solid ... -
A study on classicifation of Perlis river
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Nowadays, water pollution was viewed primarily as threat to human health. It poses serious health effect to the people as well as aquatic life. Hence, it is important to study the pollution level of river because they help ...