Now showing items 321-340 of 640

    • Analysis of soil nailing using finite element method 

      Teoh, Khai Ying (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Soil nailing system is always well known preventive method in slope improvement. Soil nailing is a complex system that requires detailed analysis to ensure stability. In the past, slope stability has always been limited ...
    • Effect of sinusoidal geometry on shear capacity of profiled web girder using finite element method 

      Zulhelmi, Zulkeflee (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)
      Plate girder is a build up section with a flat web that stiffened transversely and if necessary longitudinally. Profiled web can be alternative solution to eliminate stiffener since the profiled geometry of the web is ...
    • Slope stability analysis and rehabilitation for finite slope 

      Wan Muhammad Shazwan, Wan Shuhaimi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Slope stability analysis was conducted to evaluate the safe design of man-made or natural slopes. The term finite slope is given to any slope of finite extent with limited height such as slopes of embankments, dams, cuts, ...
    • Masonry bond by using different percentage of palm oil clinker substitution with water-cement ratio variation 

      Walvirus, Joseph (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Palm oil clinker (POC) which is relatively low cost and abundantly available had the potential as a replacement for aggregates in the production of mortar. This study investigated the effects of substitution of palm oil ...
    • Calculation of axial loads on columns by tributary area method and finite element method 

      Tee, Chin Fang (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      The basic concept for structural analysis is transfer the service loading to the support that nearby. Axial load are transfer from building structure to the column and at the end transfer to foundation. Base on this ...
    • Influence of soft clay on slope stability 

      Zakhir Firdaus, Othman (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Slope stability is a very important on the design of a slope. If this taken lightly by the engineer, perhaps a major disaster will occur that will result in lost lives. Each engineer is responsible to evaluate all aspects ...
    • Analysis of soil nailing using British Standard for slope stability 

      Zahirali, Joomun (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Development of hillside areas has seen an increased these last few decades, especially in urban residential area hence indirectly trigger the slope stability problem. This study focus on influence on slope stability for ...
    • Analysis of sediment movement at riverbank : erosion and deposition 

      Nor Shazida, Bakhari (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-04)
      Understanding of river system that have experience various forcing mechanism such as deposition and erosion is a major concern. Deposition impinges directly on many aspects especially agricultural because the study areas ...
    • Analysis of raft foundation with geofoam for earthquake resistant 

      Mohd Taftazani, Ahmad (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      It is becoming a great challenge for civil engineers to design a foundation with able to restrain form an earthquake. The paper presents the settlements of raft foundation (static load) and the effects of raft foundation ...
    • Prediction of helmet use among motorcyclists in Perlis using structural equation model (SEM) 

      Jumatul Nuraishah, Saripudin (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)
      The subscale factors of Theory of Planned Behaviour and Health Belief Modeltoward behaviour and intention of proper helmet use among motorcyclists in Perlis were investigated. Through this study, the relationship between ...
    • Analysis of sediment movement at Sg. Perlis: erosion or deposition 

      Phang, Jee San (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Sediment movement is essential to protect the environment near the river as it will affect the bed condition, depth of water and the infrastructure along the waterside. Hence, a study was conducted at Sg. Perlis to analyze ...
    • Effect of quarry dust on concrete performance 

      Noor Aini Syafiqah, Abd Rahim (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      The quarry dust is a waste material at the quarry site after the stone is crushed. To reduce the waste material in this world, reuse it is one of the solutions. So that the waste product will not be as a harmful material ...
    • Assessment of school building model under recommended earthquake loading for Peninsular Malaysia 

      Ooi, Tze Yang (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)
      This paper is written to study how a structural (in this study, a school building is taken as a model) in Malaysia resist against earthquake of which the earthquake magnitude has been scale down according to Malaysian ...
    • Effect of Effective Microorganisms (EM) on concrete performance 

      Mohd Amiruddin, Roslan (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)
      Concrete technology is life-long research. The technology strives to discover the best additives or admixtures that are able to produce good concrete in terms of physical, chemical and mechanical properties in a more ...
    • Determination of lag acceptance and effects for left turning movements at intersections 

      Normalina, Zamberi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      The congestion of traffic flow at intersection occurs at peak hour. The movement of the vehicles is slow during the critical time of peak hour which can gives effect of delay time for the other movement of the vehicles in ...
    • Phytoremedation technologies fortreating agricultural wastewater using Eichhornia Crassipes Sp. Pistia Stratiotes Sp. and Typha Latifolia Sp. 

      Nur Farhanah, Safaran (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Phytoremediation techniques for the treatment of different types of wastewater have been used by several researchers. This is new option for wastewater treatment in developing country. They are cheap to construct, simple ...
    • The effects of compaction towards permeability of granular soils 

      Nur Aima Syarafina, Mohd Razi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      A study was conducted that aimed to develop more information about the permeability of compacted soil in scope of engineering study and construction field. This paper summarizes and discusses the grain sizes of granular ...
    • Develop a programme to predict the seismic base shear force of type 1 elastic response spectra according to eurocode 8 

      Tan, See Min (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      The aim of this project is to develop a user friendly programme where seismic lateral force which also known as base shear force can be determine efficiently. The standards and conditions that used to obtain the base ...
    • The response of three storey & eight storey irregular buildings with set back under earthquake excitation with vertical component 

      Tan, Miao Gin (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      This paper presents an extensive parametric study on the response of 3 storey and 8 storey set back reinforced concrete (RC) planar frames which are subjected to 10 selected ground motions which recorded by PEER (Pacific ...
    • Tendering and estimating process in the constructions company 

      Syazwan Fikri, Elyas (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      The actual bussiness contractor depends upon the number of projects in hand. But for contractors looking for a project, the contractor will have to compete along with registered contractors. The objective of this study ...