Browsing School of Environmental Engineering (FYP) by Subject "Lightweight concrete"

Now showing items 1-8 of 8

    • Design and development of low cost lightweight concrete composites with mixture of fly ash and concrete sludge aggregate 

      Ooi, Wei Hong (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      In this research, fly ash and concrete sludge aggregates (CSA) as partial replacement have introduced into lightweight foam concrete where these materials play an important role to enhance the properties of concrete. Fly ...

    • The development of lightweight concrete using modified expanded polystyrene beads 

      Nur Zati Zulaikha, Zaaba (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Lightweight concrete defined that is a type of concrete that is use lightweight aggregates and more lighter with low density than the conventional concrete. The main objectives of this research were to produce a good quality ...

    • The development of lightweight expanded polystyrene concrete blocks 

      Tey, Lee Huan (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Nowadays, a new development of lightweight concrete has been introduced to use in construction. This is because lightweight concrete present an essential decrease in density if compared with normal concrete. The objective ...

    • Development of load bearing block from lightweight foamed concrete 

      Crystal Gayle’s, Robert (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)
      Development of lightweight concrete has been introduced to use in construction because lightweight concrete less density thus lighter than normal concrete. In this study, foam or bubbles resulting from the base oil used ...

    • Interlocking concrete block pavement (ICBP) made with coconut fiber 

      Siti Aisyah, Ismail (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-04)
      Lately there are many new products that are produced using waste materials, especially to produce construction materials. Use of other waste to avoid pollution of the environment can also reduce costs. Since 1984, Interlocking ...

    • Production of lightweight concrete from waste clay brick 

      Ainur Syahirah, Abdul Rahman (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      Nowadays, concrete is known as a common material which is widely used in the world. This study has been carried out to identify alternative materials that can be used to replace aggregate in lightweight concrete production. ...

    • Properties of lightweight foamed concrete with replacement of concrete sludge aggregate 

      Haris, Haroon (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-06)
      The need to find a cheap alternative building materials and can be used by the public in developing countries and the need to use the waste in a safe condition has attracted engineers and the community to explore the ...

    • Study On interlocking concrete blok pavement made with shredded tyre 

      Siti Zumayah, Saad (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      Increasing production of vehicles also cause a lot of increasing a waste of rubber tire. Discarded rubber tires can cause environmental pollution problems around the world. The study was conducted to find alternatives to ...