Browsing Uda Hashim, Prof. Ts. Dr. by Title
Now showing items 107-126 of 249
-
Impact of hydrogen concentrations on the impedance spectroscopic behavior of Pd-sensitized ZnO nanorods
(Licensee Springer, 2013)ZnO nanorods were synthesized using a low-cost sol-gel spin coating technique. The synthesized nanorods were consisted of hexagonal phase having c-axis orientation. SEM images reflected perpendicular ZnO nanorods forming ... -
The Impacts of Platinum Diffusion to the Reverse Recovery Lifetime of a High Power Diode Devices
(EDP Sciences, 2016)The reverse recovery lifetime of a diode is one the key parameter in power electronics market. To make a diode with fast switching speed, diodes are often doped with impurities such as gold and platinum to improve its ... -
Influence of current density on porous silicon characteristics
(Trans Tech Publications, 2013)Porous silicon structures have been fabricated by electrochemical etching using different current density. From field emission scanning electron microscope images (FE-SEM) it was observed that more uniform distribution of ... -
Influence of shear strength on long term biased humidity reliability of Cu ball bonds
(Springer Science+Business Media New York, 2014-10)This paper compares and discusses the influence of shear strength (in terms of shear-per mils-square) of Au and Cu ball bonds on the biased humidity reliability performance in SOIC 8LD leaded package. Biased (HAST) highly ... -
ISFET for pH Sensor
(Universiti Sains Islam Malaysia (USIM), 2010-09-26)ISFET is an ionic Sensitive Field Effect Transistor that has similar structure to that of a conventional MOSFET. -
Isolation, characterization, and identification of biological control agent for potato soft rot in Bangladesh
(Hindawi Publishing Corporation, 2012)A total of 91 isolates of probable antagonistic bacteria of potato soft rot bacterium Erwinia carotovora subsp. carotovora (Ecc) were extracted from rhizospheres and endophytes of various crop plants, different soil ... -
Low cost detection of pH and its effect on the capacitive behavior of micro-gap sensor
(Trans Tech Publications, 2014)The article describes the fabrication and characterization of silver microgap sensor on silicon substrate. By employing cheap photolithography process the proposed microgap sensor has been fabricated. The silver microgap ... -
Low cost diffuser based micropump using pinch actuation
(Scientific.net, 2011-12)Planar pinch micropump with the integration of two diffuser valve elements has been reported. The fabrication of the micropump is carried out by utilizing simple hot embossing technique for microdiffuser imprinting and ... -
Low cost fabrication of micromixer and microchamber for microfluidic lab-on-chip
(Institute of Electrical and Electronic Engineers (IEEE), 2012)Microfluidic technology has been given the contribution in biomedical and chemistry. The testing and diagnosis on bio-reagents has the efficiency increased through the implementation of microfluidic technology, such as lab ... -
Man-2403 resist development for electron beam lithography process
(Universiti Malaysia Pahang, 2009-06-20)Line-width of resist patterns is more susceptible to the developing time than the thickness of the undeveloped resist. This project focused on the development of MaN-2403 resist for e-beam lithography process. The ... -
Mask design and fabrication of LiSFET for light sensor application
(Institute of Electrical and Electronics Engineering (IEEE), 2008-12-01)The usage of MOSFET is not limited as amplifier and switch only but it has great potential to become the sensors when sensing mediums which integrated on to MOSFET. This research is intended to study the combination of ... -
Mask design and fabrication of Micro/Nanowire biochip for reliable and repeatability pattern transfer
(Trans Tech Publications, 2014)In Micro/Nanowire fabrication, the alignment and exposure process are the most critical steps in photolithography process, and indeed for the whole biochip processing. This process determines the success of transferring ... -
Mask design and simulation: Computer aided design for lab-on-chip application
(Trans Tech Publications, 2014)A simple design and simulation of microwire, contact pad and microfluidic channel on computer aided design (CAD) for chrome mask fabrication are described.The integration of microfluidic and nanotechnology for miniaturized ... -
Mask design for the reproducible fabrication and reliable pattern transfer for polysilicon nanowire
(Institute of Electrical and Electronics Engineers (IEEE), 2012)In fabrication of Nanowire alignment and exposure are the most critical steps in photolithography process, the resolution requirements and precise alignment are vital, each mask needs to be precisely aligned with original ... -
Mask design platform for zinc oxide nanowire growth
(Trans Tech Publications, 2013)This paper mainly represent the simple and effective method to design the chrome mask for patterning the platform for zinc oxide nanowire growth. The most essential aspect that need to be considered in designing the chrome ... -
Mask Making Process (Positive and Negative Mask)
(Kementerian Pengajian Tinggi Malaysia (KPTM), 2007-08-10)Generally, two types of masks are used in MOSFET fabrication; positive mask and negative mask. These resists mask can be used either in lift off process or conventional lithography step depends on the fabrication process ... -
Mercaptopropyltriethoxysilane (MPTES) Concentration Effect on Selectivity and Electrical Response of Nanostructure
(IOP Publishing, 2018)The surface modification by on Mercaptopropyltriethoxysilane (MPTES) done to enhance electrical behavior of nano-IDE -based sensor, silicon based active area was coated with MPTES. The electrical properties of modified ... -
Micro/nanoscale biosensing in microfluidics: Selection of polymers and microstructures
(AENSI Publications, 2012-01)Microfluidic techniques based on nanotechnology for miniaturized lab-on-chip systems have recently received huge research attention because of its undisputable and widespread biomedical applications. For the development ... -
Microfluidic photomask design using CAD software for application in lab-on-chip biomedical nano diagnostics
(Trans Tech Publications, 2013)Photomasks are used as stencil to print images on semiconductor material. This study represents design and specifications of photomask for microfluidic fabrication. For a precise pattern transfer, the photomask should meet ... -
Microfluidics design and fabrication for life sciences application
(American Scientific Publishers, 2013-01)This paper introduces a simple design and fabrication for microfluidics that need no external pumping power to delivery fluid into sensing domain with minimum sample available. Analysis using COMSOL 3.5 Multiphysics ...