Search
Now showing items 11-20 of 34
Study on physical and chemical properties of fly ash from different area in Malaysia
(Trans Tech Publications, 2013-12)
Fly ash is residue from the combustion of coal which widely available in worldwide and lead to waste management proposal. Moreover, the use of fly ash is more environmental friendly and save cost compared to OPC. Fly ash ...
Properties of fresh palm oil fuel ash based geopolymer material
(American-Eurasian Network for Scientific Information (AENSI), 2013-10)
In this paper, palm oil fuel ash (POFA) was used as the soul material to produce geopolymer binder. Sodium silicate mixed with sodium hydroxide was used as alkaline activator to activate the palm oil fuel ash. Activator ...
Potential of upgrading domestic biomass into a higher energy density via torrefaction process
(Trans Tech Publications, 2013)
Torrefaction is a thermal treatment step in a relatively low temperature range of 240-300°C, which aims to produce a higher energy biomass in terms of low heating value (LHV) and light weight properties. Biomass in wood ...
Corrosion performance of reinforcement bar in geopolymer concrete compare with its performance in ordinary portland cement concrete: A short review
(Trans Tech Publications, 2013)
Since decades ago, corrosion is the crucial factors for million dollars loss in construction industry. Corrosion of reinforcement bar in ordinary Portland cement (OPC) concrete is mainly due to chloride and acid attack and ...
Kaolin-based geopolymers with various NaOH concentrations
(Springer Verlag, 2013-03)
Kaolin geopolymers were produced by the alkali-activation of kaolin with an activator solution (a mixture of NaOH and sodium silicate solutions). The NaOH solution was prepared at a concentration of 6-14 mol/L and was mixed ...
Influence of oxide molar ratios on kaolin geopolymers
(American Scientific Publishers, 2013-12)
Oxide molar ratios are the main key parameter determining the performance of a kaolin geopolymers. The kaolin composition and various mixture proportions will lead to different oxide molar ratios in geopolymer system. In ...
Mechanical and microstructural evaluations of lightweight aggregate geopolymer concrete before and after exposed to elevated temperatures
(MDPI, Basel, Switzerland, 2013)
This paper presents the mechanical and microstructural characteristics of a lightweight aggregate geopolymer concrete (LWAGC) synthesized by the alkali-activation of a fly ash source (FA) before and after being exposed to ...
A study on the synthesis of fly ash-based lightweight aggregate geopolymer concrete
(American Scientific Publishers All rights reserved., 2013-01)
The experiments conducting for current investigation aimed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) and explore the significance and limitations of the activator content on the ...
Study on fly ash based geopolymer for coating applications
(Trans Tech Publications, 2013)
Geopolymer is cementitious binders that do not require the presence of ordinary Portland cement (OPC). Fly ash with geopolymer formulations prepared with mixing alumino-silicate with the alkaline activator solution has ...
Mechanical properties of polymer composites with sugarcane bagasse filler
(Trans Tech Publications, 2013)
Natural fibers reinforced polymer composites have gained more interest because of their biodegradable, light weight, less expensive sources, easy processing, high specific modulus and also environmentally friendly appeal. ...