Search
Now showing items 1-10 of 16
The processing, characterization, and properties of fly ash based geopolymer concrete
(Advanced Study Center Co. Ltd, 2012)
In recent years, attempts to increase the utilization of fly ash as a replacement for ordinary Portland cement (OPC) in concrete have increased in significance. Geopolymer concrete does not need the presence of Portland ...
Study on physical and chemical properties of fly ash from different area in Malaysia
(Trans Tech Publications, 2013-12)
Fly ash is residue from the combustion of coal which widely available in worldwide and lead to waste management proposal. Moreover, the use of fly ash is more environmental friendly and save cost compared to OPC. Fly ash ...
Microstructure study on optimization of high strength fly ash based geopolymer
(Trans Tech Publications, 2012)
The compressive strength and microstructural characteristics of fly ash based geopolymer with alkaline activator solution were investigated. The sodium hydroxide and sodium silicate were mixed together to form an alkaline ...
Microstructure study on volcano ash geopolymer aggregate at different sintering temperature
(Trans Tech Publications, 2014)
Recent research shows that the by-product materials such as fly ash can be used as raw material in producing aggregates and lightweight aggregates. The usage of this material can improve the quality of the aggregates ...
Influence of dolomite on the mechanical properties of boiler ash geopolymer paste
(Trans Tech Publications, 2014)
The waste material from palm oil industry has been increasing since Malaysia was the world largest exported of palm oil mill. The waste such as palm fibers, nut shells, palm kernel and empty fruit bunches are the solid ...
Design, processing and characterization of fly ash-based geopolymers for lightweight concrete application
(Institute for Scientific Information (ISI), 2013-04)
The mix design of geopolymers plays important role in obtaining desirable compressive strength. Optimum mix design of geopolymers can be applied for application, such as lightweight concrete. In order to determine the ...
Characterization of LUSI mud volcano as geopolymer raw material: A review
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)
This paper summarizes the current knowledge about the potential of LUSI mud volcano, East Java, Indonesia as a raw material in geopolymer. Previous experimental study shows that the LUSI mud has a good performance when 5% ...
Comparison of geopolymer fly ash and ordinary Portland cement to the strength of concrete
(American Scientific Publishers, 2013-12)
The aim of this study is to evaluate the effect of various fly ash: aggregate ratios by using fly ash (FA) based geopolymer compared to ordinary Portland cement (OPC) on the compressive strength of concrete. The different ...
Comparison of original and sintered LUSI mud from East Java, Indonesia as raw material for making a geopolymer
(American Scientific Publishers, 2013-01)
This paper presents the characterization of LUSI mud from East Java, Indonesia, as a potential raw material for making a geopolymer. Two types of LUSI mud were analyzed, i.e., original LUSI mud and LUSI mud that had been ...
Characterization of LUSI mud volcano as geopolymer raw material
(Trans Tech Publications, 2012)
The mud of mud volcano samples were collected from an eruption site named 'LUSI' (Lumpur "mud" -Sidoarjo), East Java, Indonesia for characterization. Analysis showed that, the major constituents of mud are SiO 2 and Al 2O ...