Browsing Researchers by Subject "Malaysian Technical Universities Conference on Engineering and Technology (MUCEET)"

Now showing items 1-19 of 19

    • CdS film thickness characterization by R.F. magnetron sputtering 

      Uda, Hashim, Prof. Dr.; Kasim, Abdul Rahman; Hakim; Mohd Azri, Othman (American Institute of Physics, 2009-06-01)
      In this work, cadmium sulphide (CdS) target with 99.999% purity was used as a target in RF magnetron sputtering. The sputtering experiment was conducted onto silicon oxide substrates at different temperatures ranging from ...

    • Design of digital control frequency sinusoidal wave generator for dielectric analyzer 

      A., Saifullah; Uda, Hashim, Prof. Dr. (Universiti Malaysia Pahang, 2009-06-20)
      The dielectric analyses are usually done using capacitance measurement technique. A set of sinusoidal wave frequency are applied to the capacitance. This paper is about the design of digital control frequency of ...

    • Generating electricity in Malaysia using solar updraft tower (SUT) 

      Rosnizam, Zailan; Eng, Yi Fong; Ismail, Daut; Fijay, Fauzi (Universiti Malaysia Pahang (UMP), 2009-06-20)
      This paper presents the possibility of generating electricity for a single house in Malaysia using solar updraft tower (SUT). This paper starts with the short introduction of SUT and the advantages. Then followed with ...

    • Gradient temperature on 3Phase transformer core with staggered yoke with 90 T-joint 

      Ismail, Daut, Prof. Dr.; Dina Maizana, MT; M., Ahmad (Universiti Malaysia Pahang (UMP), 2009-06-20)
      This paper describes the result of measurement of localised temperature rise on 100kVA 3phase distribution transformer assembled with 90o T-joint and mitred lap corner joint with stagger yoke with overlap length of 10mm. ...

    • Hydrophobic silica nano-tube immobilized with Cyanex 272 for the extraction of metal ions 

      Md Fazlul, Bari; Noorzahan, Begum; Shamsul Baharin, Jamaludin, Prof. Dr.; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr. (Universiti Malaysia Pahang, 2009-06-20)
      This paper reports on the synthesis and application of hydrophobic silica nano-tubes immobilized with Cyanex 272 (HBSNC) as a new, inexpensive and easily prepared solid-phase extractant for the extraction of Cu(II), ...

    • Man-2403 resist development for electron beam lithography process 

      Nur Hamidah, Abdul Halim; Uda, Hashim, Prof. Dr.; Mohammad Nuzaihan, Md Nor (Universiti Malaysia Pahang, 2009-06-20)
      Line-width of resist patterns is more susceptible to the developing time than the thickness of the undeveloped resist. This project focused on the development of MaN-2403 resist for e-beam lithography process. The ...

    • Nanogap biosensor development for DNA immobilization and hybridization detection 

      Th. S., Dhahi; Uda, Hashim; N. M., Ahmed; A., Mat Taib (Universiti Malaysia Pahang, 2009-06-20)
      In the past two decades, the biological and medical fields have seen great advances in the development of biosensors and biochips capable of characterizing and quantifying biomolecules. To understand the important ...

    • Numerical analysis of dummy neck for crashworthiness assessment 

      Mohamad Sulaiman, Ibrahim; Rakhmad Arief, Siregar, Dr.; Abdul Hamid, Adom, Assoc. Prof. Dr.; Khan, Shah Fener; Hafizawati, Zakaria (Universiti Malaysia Pahang (UMP), 2009-06-20)
      This paper presents an analysis of numerical child dummy neck and neck injury analysis of the numerical child dummy neck. The neck model is developed using flexible component and rigid body. As for the geometries of ...

    • Partial replacement of toluene diisocyanate (TDI) on mechanical properties of old newspaper filled diphenylmethane diisoeyanale (MDI) foam composites 

      Z., Dahlia; Salmah@Selamah, Haji Ayob, Prof. Madya; Azlin Fazlina, Osman (Universiti Malaysia Pahang, 2009-06-20)
      The mechanical properties of partial replacement of toluene diisocyanate (TDI) in diphenylmethane 4,4’-diisocyanate of old newspaper (ONP) foam composite based on polyurethane (PU) was investigated. The results indicate ...

    • Pattern designed for combination of optical lithography and electron beam lithography 

      S. Fatimah, Abd Rahman; Uda, Hashim, Prof. Dr.; Mohammad Nuzaihan, Md Nor; A. M., Mohamed Nuri; Muhamad Emi Azri, Shohini (Universiti Malaysia Pahang, 2009-06-20)
      In this paper the fabricated pattern of nanometer and micrometer structures created with electron beam lithography (EBL) and optical lithography on silicon on insulator (SOI) material is presented. The resist used to ...

    • Phosphate removal using aluminum–doped rice husk ash–derived silica 

      Salsuwanda, Selamat; Masitah, Hasan; Azlinda, Abd Ghani; Che Zulzikrami, Azner Abidin (Universiti Malaysia Pahang, 2009-06-20)
      Phosphate, a compound which has phosphorus as its key atom, from excess fertilizers and detergents ends up washing into lakes, creeks and rivers. This overabundance of phosphorus causes excessive aquatic plant and algae ...

    • The power quality impact of adjustable speed drives in industrial distribution system 

      Surya, Hardi; Ismail, Daut; Mohd Irwanto; Mohd Herwan, Sulaiman; Risnidar, Chan; Indra, Nisja (Universiti Malaysia Pahang (UMP), 2009-06-20)
      Applications of adjustable speed drives (ASDs) have benefited many industrial facilities. The primary function function of any speed drive is to control the speed of a motor. This control technique can significantly ...

    • Properties of modified polystyrene lightweight aggregate in concrete 

      R., Fetra Venny; Khairul Nizar, Ismail, Dr.; Mohd Mustafa Al Bakri, Abdullah (Universiti Malaysia Pahang, 2009-06-20)
      Several experiments were conducted to characterize the properties of modified polystyrene lightweight aggregate in concrete. Microstructure of modified polystyrene lightweight aggregate in concrete can be assessed by ...

    • Remotely navigated mobile platform using voice command 

      Khairulnizam, Othman; Sundaraj, Kenneth (Universiti Malaysia Pahang (UMP), 2009-06-20)
      Voice is one of convenient methods to communicate between human and robots. To command a robot task by voice, voices of the same number have to be able to be recognized But the more the number of recognition voice is, ...

    • Removal of copper from aqueous solution by citric acid modified rice straw 

      Che Zulzikrami, Azner Abidin; Fahmi, Muhamad Ridwan; Naimah, Ibrahim; Masitah, Hassan; Salsuwanda, Selamat; Nazerry Rosmady, Rahmat (Universiti Malaysia Pahang, 2009-06-20)
      The objective of the present study were to convert rice straw, a by-product of rice production to a metal adsorbent and further to investigate the potential of using the adsorbent for the removal of Cu(II) ions. The ...

    • Simulation of crack analysis on a plate with ellipse and small rivet holes 

      Mohd Sofian, Mohd Rosbi; Hazry, Desa; Nur Saifullah; Md Tasyrif, Abdul Rahman; Ishak, Ibrahim; Mohd Khairul Faizi, Abd Rahman (Universiti Malaysia Pahang (UMP), 2009-06-20)
      This paper is about simulation of crack analysis on a plate with ellipse and small rivet holes. This simulation is show the condition on a plate which has 8 rivet holes around the ellipse hole. This dimension of the plat ...

    • A study on floatability of copper using modified hallimond tube 

      H., Aimi Noorliyana; Mohd Zaheruddin, Kasmuin; Md Fazlul, Bari; Sri Asliza, Md Amin; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Universiti Malaysia Pahang, 2009-06-20)
      The Floatability of copper on the Modified Hallimond tube depend on lots of parameters such as dosage and types of collector, frother, air flow rate, flotation time, and pH value. All of this parameters give different ...

    • A study on floatability of copper using Modified Hallimond Tube 

      Aimi Noorliyana, H.; Mohd Zaheruddin, Kasmuin; Md. Fazlul, Bari; Sri Asliza, Md Amin; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Universiti Malaysia Pahang (UMP), 2009-06-20)
      The Floatability of copper on the Modified Hallimond tube depend on lots of parameters such as dosage and types of collector, frother, air flow rate, flotation time, and pH value. All of this parameters give different ...

    • The utilization of coal fly ash and red gypsum as fire insulation product 

      Ayu Wazira, Azhari; Azmil, Mohd Aris; Abdul Haqi, Ibrahim; Salwa, Mohd Zaini Makhtar; Mahyun, Ab Wahab (Universiti Malaysia Pahang, 2009-06-20)
      In this paper, the thermal, mechanical and optical properties of mortars mainly composed of coal fly ash and red gypsum are studied with the aim of analyzing the fire resistance and mechanical strength characteristics of ...