Now showing items 1-20 of 46

    • Application of clay - based geopolymer in brick production: A review 

      Muhammad Faheem, Mohd Tahir; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Izzat, Ahmad (Trans Tech Publications, 2013)
      This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...
    • Application of clay - based geopolymer in brick production: A review 

      Muhammad Faheem, Mohd Tahir; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Izzat, Ahmad (Trans Tech Publications Inc., 2013)
      This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...
    • Biodegradability analysis of KBF reinforced poly (lactic acid) biocomposites 

      Maizatulnisa, Othman, Dr.; Nor Azowa, Ibrahim, Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Nazarudin, Zakaria, Dr.; Zahurin, Halim, Dr. (Trans Tech Publications, 2012)
      Poly (lactic acid) (PLA) and kenaf bast fiber (KBF) were melt-blended using brabender into films in the PLA/KBF ratios of 100/0, 90/10, 70/30 and 50/50 for natural soil burial test. This formulation was used to study the ...
    • Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature 

      Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Zarina, Yahya; Mohd Arif Anuar, Mohd Salleh; Nurhamidah, Zakaria; Muhammad Faheem, Mohd Tahir (Trans Tech Publications, 2014)
      This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...
    • Compressive strength of fly ash based geopolymer / glass fiber composite via filament winding 

      Che Mohd Ruzaidi, Ghazali, Prof. Madya; Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Anis Nadhirah, Ismail (Trans Tech Publications, 2014)
      In general, filament winding technique is used to fabricate the composite pipes using continuous fiber and matrix resin. In this study, fly ash based geopolymer resin composites reinforced by continuous glass fiber were ...
    • Concrete Ceramic Waste Slab (CCWS) 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Shamsul Baharin, Jamaludin, Prof. Madya (Malaysian Invention & Design Society (MINDS), 2006-05-19)
      Concrete Ceramic Waste Slab (CCWS) was fabricated by mixing the composition of cement and ceramic wastes. The ceramic wastes will act as coarse aggregates in the mixture. This slab can be used as landscape products such ...
    • Correlating composition design and properties of calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Heah, Cheng Yong (American Scientific Publishers, 2013-12)
      This paper discussed the relation between composition design and properties of calcined kaolin geopolymeric powder. Geopolymeric powder was produced by applying the geopolymerization process. The solids-to-liquid ratios ...
    • Decor Concrete Polymer (DCP) 

      Mohd. Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Khairul Nizar, Ismail, Dr.; Norazian, Mohamed Noor; Alida, Abdullah (Kementerian Pengajian Tinggi Malaysia (KPTM), 2007-08-10)
      Decor Concrete Polymer (DCP) was fabricated from mixing the composition of cement and polystrene wastes. The polystyrene wastes will act as coarse of fine aggregates in the mixture. This concrete can be used as lightweight ...
    • Easy Fix Concrete Block 

      Mohd Mustafa Al-Bakri, Abdullah; Lim Ngau, Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Norazian, Mohamed Noor (Malaysian Association of Research Scientists (MARS), 2007-03-29)
      Easy Fix Concrete Block is one of a new design of concrete block. This type of concrete block is Motarless Concrete Interlocking Blocks System. Concrete block inherent fire resistance, easy to use and attractive makes it ...
    • Effect of curing regimes on metakaolin geopolymer pastes produced from geopolymer powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohammed, Bnhussain; Luqman, Musa; Khairul Nizar, Ismail, Prof. Madya Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Cheng, Yong Heah (Scientific.Net/Trans Tech Publications, 2012-12)
      The properties of metakaolin geopolymer paste are affected by the alkali concentration, the initial raw materials, solidification process, and amount of mixing water as well as the curing conditions. This study aimed to ...
    • Effect of fly ash/alkaline activator ratio and sodium silicate/NaoH ratio on fly ash geopolymer coating strength 

      Liyana, Jamaludin; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Azura, Abdul Rashid Assoc. Prof. (Trans Tech Publications, 2013)
      Fly ash geopolymer coating material potential used to protect surface used in exposure conditions. Ratio of fly ash/alkaline activator and Na₂SiO₃/NaOH play important parameter on determining the best flexural strength of ...
    • Effects of multi-walled carbon nanotubes (MWCNTS) on the mechanical and thermal properties of plasticized polylactic acid nanocomposites 

      Maizatulnisa, Othman, Dr.; Tan, Kok Hui; Mohd Yusof, Hashim; Halisanni, Khalid; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Nazarudin, Zakaria, Dr; Paridah, Md Tahir, Prof. Dr.; Noor Azlina, Hassan, Dr. (Trans Tech Publications, 2013)
      A multi-walled carbon nanotube (MWCNT)/plasticized polylactic acid (PLA) composite was prepared using a two-roll mill set at 170°C and 50 rev/min. The material was characterized using dynamicmechanical analyzer (DMA). ...
    • Fabrication and mechanical properties of composite palm ash mixed with phenolic resins 

      Mohd Radzi, Ali; Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi; Che Mohd Ruzaidi, Ghazali, Prof. Madya (International Network for Scientific Information Publication (INSI), 2011-11)
      Brake pad is one of the important engineering components in automobile and it is fabricated by combination of various materials. Asbestos is one of the components in brake pad that is harmful to the human. In this ...
    • Feasibility study on composition and mechanical properties of marine clay based geopolymer brick 

      Mohammad Tamizi, Selimin; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liyana, Jamaludin; Aeslina, Abdul Kadir, Dr. (Trans Tech Publications, 2014)
      Geopolymer is an inorganic polymer performed in synthesis process of an aluminosilicate material which activated by alkaline activator solution. Marine clay, considered to be a waste substance which have an important ...
    • Fly ash porous material using geopolymerization process for high temperature exposure 

      Mohd Mustafa Al Bakri, Abdullah; Liyana, Jamaludin; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Izzat, Ahmad (MDPI AG (Basel, Switzerland), 2012-04)
      This paper presents the results of a study on the effect of temperature on geopolymers manufactured using pozzolanic materials (fly ash). In this paper, we report on our investigation of the performance of porous geopolymers ...
    • General properties of kaolin geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liew, Yun Ming (American Scientific Publishers, 2013-01)
      This paper reported the properties of kaolin geopolymers in term of the bulk density, compressive strength, qualitative observation and SEM analysis of the kaolin geopolymers. Kaolin geopolymers were synthesized through ...
    • Grass-Plastic Composite Panel (GPC Panel) 

      Che Mohd Ruzaidi, Ghazali, Prof. Madya; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Nurul Razliana, Abd Razak (Kementerian Pengajian Tinggi Malaysia (KPTM), 2007-08-10)
      Cut out grass is one of the abundant lignocelluloses nature waste in Malaysia. It can be easily transformed into fibrous form which can be used as an organic filler or fiber in the plastics composite. Grass-Plastic Composite ...
    • Halal based sourced EM for turbidity reducing in wastewater treatment 

      Zarina, Zakaria; Noorulnajwa Diyana, Yaacob; Mohd Mustafa Al-Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali, Prof. Madya (Trans Tech Publications, 2014)
      Effective Microorganism (EM) technology was found as the credible solution to solve many environmental problems including wastewater issues. The EM which is in the form of EM mud ball was tested to be effectively used for ...
    • Influence of activator composition on the properties of calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Cheng Yong, Heah (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      This paper studied the influence of activator composition on the properties of calcined kaolin geopolymeric powder. The alkaline activation of calcined kaolin was performed in mixture of waterglass liquid and NaOH solution ...
    • Influence of oxide molar ratios on kaolin geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liew, Yun Ming (American Scientific Publishers, 2013-12)
      Oxide molar ratios are the main key parameter determining the performance of a kaolin geopolymers. The kaolin composition and various mixture proportions will lead to different oxide molar ratios in geopolymer system. In ...