Browsing Researchers by Title
Now showing items 3288-3307 of 3490
-
Thermal investigations of microelectronic chip with non-uniform power distribution: temperature prediction and thermal placement design optimization
(Emerald Group Publishing Limited, 2004)This paper presents the thermal analyses carried out to predict the temperature distribution of the silicon chip with non-uniform power dissipation patterns and to determine the optimal locations of power generating sources ... -
Thermal management of multi-chip module and printed circuit board using FEM and genetic algorithms
(Emerald Group Publishing Limited, 2005)Purpose - To determine the optimal chip/component placement for multi-chip module (MCM) and printed circuit board (PCB) under thermal constraint. Design/methodology/approach - The placement of power dissipating chips/component ... -
Thermal management of multichipmodule (MCM) using genetic algorithms
(IEEE Conference Publications, 2003)The placement of power dissipating chips for a multichip module (MCM) is carried out using genetic algorithms. Since high power is to be dissipated over a small area of a module, the heat must be conducted away efficiently. ... -
Thermal properties of different recycled acrylonitrile-butadiene rubber glove (NBRr) size and its blend ratios on SBR/NBRr blends
(Trans Tech Publications, 2013-09)The effects of SBR/NBRr blends on thermal properties of such thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) were carried out. Results showed that by incorporating the smallest size NBRr ... -
Thermal properties of ethyl vinyl acetate (EVA)/ montmorillonite (MMT) nanocomposites for biomedical applications
(EDP Sciences, 2016)The viability of nanocomposites comprising Ethyl Vinyl Acetate (EVA) filled montmorillonite (MMT) nanoclay as candidate materials of biomedical devices was investigated. EVA/MMT nanocomposites were prepared by incorporating ... -
Thermal properties of linear-low density polyethylene (LLDPE)/soya spent powder blends with the addition of epoxidised natural rubber
(Trans Tech Publications, 2013)Soya spent powder as an inexpensive and renewable source has been used as a filler for linear-low density polyethylene (LLDPE) in this study. Linear-low density polyethylene (LLDPE)/soya spent powder composites were prepared ... -
The thermal properties of low density polyethylene (LDPE)/ palm kernel shells (PKS) composites
(Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)The thermal properties of Low Density Polyethylene (LDPE)/ Palm Kernel Shell (PKS) composites were studied. The composites with and without compatibilizer were prepared and subjected to thermogravimetric analysis (TGA) ... -
Thermal properties of microsilica and nanosilica filled polypropylene composite with epoxy as dispersing aid
(SAGE Publications, 2007)Nanocomposite materials differ from the traditional composite materials in that they provide enhanced properties at comparatively low filler loading with respect to microsize filler. In this research work, silica filled ... -
Thermal properties of recycled polyethylene/chitosan composites: The effect of eco-degradant PD 04
(Trans Tech Publications, 2014)The effect of eco-degradant PD 04 as additive on the thermal properties of recycled polyethylene (RPE)/chitosan biopolymer was investigated. The different scanning calorimetric (DSC) was used to investigate the thermal ... -
Thermal properties of Sn-0.7Cu/re-Al composite lead-free solder
(Trans Tech Publications, 2013)Composite approach in lead-free solder development was perceived as an expectation in finding new robust solder. Accordingly, Sn-0.7Cu/re-Al composite lead-free solder with varying amount of recycled-Aluminium (0, 3.0, 3.5 ... -
Thermal resistance variations of fly ash geopolymers: foaming responses
(Springer Nature Limited, 2017-03)This paper presents a comparative study of the characteristic of unfoamed and foamed geopolymers after exposure to elevated temperatures (200–800 °C). Unfoamed geopolymers were produced with Class F fly ash and sodium ... -
Thermal, electrical and physical properties of recycled copper filled epoxy composites
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)Thermal, electrical and physical properties of the recycled copper filled epoxy composites were investigated. The recycled copper was collected as a waste from the milling machine. The recycled copper filled epoxy composite ... -
Thermal, electrical and physical properties of recycled copper filled epoxy composites
(Scientific.Net, 2012-12)The effect of recycled copper filled epoxy composites on thermal, electrical and physical properties were investigated. The recycled copper was collected as a waste from the milling machine. The recycled copper filled epoxy ... -
Thermo-enzymatic hydrolysis of Cassava Starch by α-amylase and amyloglucosidase
(Universiti Malaysia Perlis (UniMAP), 2008-03-16)One of the greatest challenges for the 21st century society is to meet the growing demand for energy for transportation in sustainable way. Petroleum based products are in critical state and alternatives for fuel is needed. ... -
Thermodynamic studies on removal of reactive blue 19 dye on cross-linked chitosan/oil palm ash composite beads
(Institute of Electrical and Electronics Engineering (IEEE), 2009-12-07)The effect of temperature on adsorption of reactive blue 19 (RB19) by cross-linked chitosan/oil palm ash composite beads was investigated. Temperature studied from range 30 to 50 0C. It was observed that the uptake of this ... -
Thermogravimetric analysis and the optimisation of bio-oil yield from fixed-bed pyrolysis of rice husk using response surface methodology (RSM)
(Elsevier B. V., 2011-03)The effects of pyrolysis temperature, heating rate, particle size, holding time, and gas flow rate were investigated to optimize bio-oil yield from rice husk pyrolysis. Thermogravimetric analysis showed thermal degradation ... -
Thermogravimetric analysis and the optimisation of bio-oil yield from fixed-bed pyrolysis of rice husk using response surface methodology (RSM)
(Elsevier B.V., 2011-03)The effects of pyrolysis temperature, heating rate, particle size, holding time, and gas flow rate were investigated to optimize bio-oil yield from rice husk pyrolysis. Thermogravimetric analysis showed thermal degradation ... -
Thermokinetics of Catalytic Pyrolysis of Biomass for Production of Sustainable Energy
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)Pyrolysis can be described as the thermal decomposition of the organic matrix in the absence of oxygen.Currently, the pyrolysis of biomass is paid much attention for the production of sustainable energy. In this study, ... -
Thin film thickness and uniformity measurement for lab-on-chip based nanoelectrode biosensor development
(Trans Tech Publications, 2014)One of the advantages of silicon substrate over other semiconductor substrate is the high temperature process capability of the silicon. In this work, silicon wafer is used for thermal processing which involves many high ... -
A three dimensional finite element of Anterior Cruciate Ligament model
(Trans Tech Publications, 2013)Anterior Cruciate Ligament (ACL) is of the major knee ligament. A three dimensional model that reflects the geometric characteristics of the human ACL developed to explore and analyze finite element parameters such as ...