Browsing Researchers by Title
Now showing items 3262-3281 of 3486
-
Tensile properties LLDPE/soya spent powder blends: Oven aging
(Trans Tech Publications, 2013)Linear low-density polyethylene (LLDPE)/soya spent powder blends with different blends ratio were prepared by using internal mixer. Soya spent powder was varied from 5 to 40 wt. The thermal degradability was assessed by ... -
The tensile properties of chitosan filled polypropylene (PP) composites treated with acetic acid
(Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)The effect of chemical modification on tensile properties of chitosan filled polypropylene (PP) composites as a function of filler loading was investigated. The chemical modification was conducted via acetylation of chitosan ... -
Tensile properties of kenaf/unsaturated polyester composites filled with a montmorillonite filler
(Wiley Periodicals, Inc., 2011-03-05)Kenaf/unsaturated polyester composites filled with montmorillonite (MMT) filler were produced. Overall, the study showed that, for samples with kenaf filler only, the strength properties decreased as the kenaf filler loading ... -
Tensile properties of polypropylene/cocoa pod husk biocomposites: Effect of maleated polypropylene
(Trans Tech Publications, 2013)Polypropylene/Cocoa Pod Husk (PP/CPH) biocomposites with different maleated polypropylene (MAPP) content were prepared via melt blending process using Brabender Plastrograph mixer. The tensile strength and tensile modulus ... -
Tensile properties, swelling behaviour, and morphology analysis of recycled high density polyethylene/natural rubber/chicken feather fibers (R-HDPE/NR/CFF) composites: the effects of caprolactam
(Trans Tech Publications, 2014)The effect of caprolactam as a coupling agent on the tensile properties, swelling behavior and orphology analysis of recycled high density polyethylene/ natural rubber/ chicken feather fiber (R-HDPE/ NR/ CFF) composites ... -
Tensile properties, swelling, and water absorption behavior of rice-husk-powder-filled polypropylene/(recycled acrylonitrile-butadiene rubber) composites
(Society of Plastics Engineers, 2011-09)The effect of rice husk powder (RHP) on the tensile properties, swelling, water absorption, and morphology of polypropylene (PP)/[recycled acrylonitrile-butadiene rubber (NBRr)]/RHP composites was studied. Composites ... -
Tensile strength of untreated napier grass fibre reinforced unsaturated polyester composites
(Trans Tech Publications, 2014-06)This paper describes the experimental investigation of the tensile strength of untreated Napier grass fibre reinforced polyester composites. Napier grass fibres were extracted trough conventional water retting process and ... -
Test chip and substrate design for flip chip microelectronic package thermal measurements
(Emerald Group Publishing Limited, 2006)Purpose: This paper's purpose is to review the design of a flip chip thermal test vehicle. Design/methodology/approach: Design requirements for different applications such as thermal characterization, assembly process ... -
Testing of contactors under voltage sag and non-sinusoidal voltage conditions
(Institute of Electrical and Electronics Engineers (IEEE), 2010-11-29)Sensitivity of electromagnetic contactors for voltage sags and non-sinusoidal voltage supply has been carried out by laboratory testing. Effects of sag characteristics such as; sag magnitude, sag duration and point on wave ... -
Theoretical and experimental study towards fabrication of nanogap dielectric biosensor by reversed spacer lithography
(American Institute of Physics, 2010-03-11)A reversed spacer patterning technology using a sacrificial layer and a chemical vapor deposition (CVD) spacer layer has been developed, and is demonstrated to achieve sub-50 nm structures with conventional dry etching. ... -
Theoretical approach on vein graft survival : A review
(Universiti Malaysia Perlis (UniMAP)School of Mechatronic Engineering, 2012-02-27)Fluid shear stress and mechanical wall stress may play a role in the formation of early atherosclerotic lesion, but these quantities are difficult to in measure in vivo. In this paper we numerically stimulate flow in a ... -
Theoretical approach on vein graft survival: Simulation on vein graft
(Inderscience Enterprises Ltd., 2013)Artery reconstruction in upper extremities is rare performed compared to artery reconstruction in lower extremities. Primary vascular repair was performed in many cases. An interposition vein graft or venous bypass grafting ... -
Theoretical investigation for Li2CuSb as multifunctional materials: Electrode for high capacity rechargeable batteries and novel materials for second harmonic generation
(Elsevier B.V., 2011-07-28)Based on the first-principles electronic structure calculations, we predict that Li2CuSb should be good electrode materials for high capacity rechargeable batteries and novel materials for second harmonic generation. This ... -
Theoretical investigation of far-infrared optical behaviors in asymmentrical first-order ferroelectrtric thick film
(Universiti Putra Malaysia (UPM), 2005-12-06)This paper gives a detailed, fully numerical approach to investigate the behavior of far-infrared (FIR) waves in the first-order of asymmetrical thick film ferroelectrics on semiconductor substrate. The theoretical calculation ... -
Thermal aging study at 150 °C and 200 °C: Gold ball bonds to aluminum bond pad
(The Electrochemical Society, 2009-03-17)This paper presents the study of the thermal aging of the gold ball bonds and aluminum bond pad at 150 °C and 200 °C for various interval times. Process decapsulation and Field Emission Scanning Electron Microscopy (FESEM) ... -
Thermal analysis and pozzolanic index of rice husk ash at different grinding time
(Elsevier B.V., 2012)Thermo-gravimetric and differential thermo-gravimetric analyses were performance to study the effect of temperature on the mineralogical compositions of rice husk ash subjected to different grinding time. Eight rice husk ... -
Thermal analysis of micro-channel heat exchangers with two-phase flow using FEM
(Emerald Group Publishing Limited, 2005)Purpose - To analyze two-phase flow in micro-channel heat exchangers used for high flux micro-electronics cooling and to obtain performance parameters such as thermal resistance, pressure drop, etc. Both uniform and ... -
Thermal analysis of Paper Sludge and Kaolin Filled Polypropylene (PP)/Ethylene Propylene Diene Terpoymer (EPDM) hybrid composites: the effect of MAPP and LICA
(Kolej Universiti Kejuruteraan Utara Malaysia, 2006)Paper sludge, one of cellulosic materials, is a by product during paper manufacture. Polypropylene (PP)/ethylene propylene diene terpolymer (EPDM) hybrid composites were made using kaolin and paper sludge (PS) filler as ... -
Thermal degradation of high-density polyethylene/soya spent powder blends
(Walter de Gruyter GmbH, 2015-06-01)This study investigates the properties of high-density polyethylene (HDPE) with different soya spent powder (SSP) blend contents upon oven aging. The aged properties of the HDPE/SSP blends were studied by using tensile ... -
Thermal expansion behavior of the electroless copper coated Cu-SiCp composites fabricated via the conventional powder metallurgical technique
(Trans Tech Publications, 2014-01)The introduction of the metal matrix composites as the advanced electronic packaging materials is highly anticipated because their thermal properties can be engineered to match those of semiconductors, ceramics substrates ...