Search
Now showing items 1-10 of 33
Fly ash porous material using geopolymerization process for high temperature exposure
(MDPI AG (Basel, Switzerland), 2012-04)
This paper presents the results of a study on the effect of temperature on geopolymers manufactured using pozzolanic materials (fly ash). In this paper, we report on our investigation of the performance of porous geopolymers ...
Study on properties and morphology of kaolin based geopolymer coating on clay substrates
(Trans Tech Publications, 2013-12)
The application of geopolymer as a coating was not widely explored by other researchers and therefore the study of kaolin based geopolymer coating applied on different types of clay substrate (unsintered and sintered) was ...
Effect of curing regimes on metakaolin geopolymer pastes produced from geopolymer powder
(Scientific.Net/Trans Tech Publications, 2012-12)
The properties of metakaolin geopolymer paste are affected by the alkali concentration, the initial raw materials, solidification process, and amount of mixing water as well as the curing conditions. This study aimed to ...
Potential of marine clay as raw material in geopolymer composite
(Scientific.Net/Trans Tech Publications, 2012-12)
In this research, marine clays has been studied its potential as a matrix composite materials that tend to be used as alternative materials to concrete. The study shows that marine clays which mixed with appropriate ...
Strength and microstructural properties of mechanically-activated kaolin geopolymers
(Trans Tech Publications, 2012-12)
Kaolin geopolymers exhibit low strength properties due to its plate-like nature which contribute to smaller surface area for geopolymerization reactions. Layered kaolin structure only allows very little, if any, substitution ...
Mechanical performances of fly ash geopolymer bricks
(American Scientific Publishers, 2013-01)
Geopolymer is a new class of three-dimensionally networked amorphous to semi-crystalline alumino-silicate materials, and first developed by Professor Davidovits in 1978. Geopolymers can be synthesized by mixing alumino-silicate ...
The effect of curing time on the properties of fly ash-based geopolymer bricks
(Scientific.Net/Trans Tech Publications, 2012-12)
This paper reports the results of an experimental work conducted to investigate the effect of curing conditions on the properties of fly ash-based geopolymer bricks prepared by using fly ash as base material and combination ...
Lightweight fly ash-based geopolymer concrete
(Trans Tech Publications, 2013)
The experiments of this study were preformed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) using normal sand as a fine aggregate and expanded clay as lightweight aggregate. The LWAGC ...
Application of clay - based geopolymer in brick production: a review
(Trans Tech Publications/Scientific.Net, 2012-12)
This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...
Optimization of alkaline activator / fly ash ratio on the compressive strength of manufacturing fly ash-based geopolymer
(Trans Tech Publications, 2012)
Fly ash and a mixture of alkaline activators namely sodium silicate (Waterglass) and sodium hydroxide (NaOH) solution were used for preparing geopolymer. The aim of this research is to determine the optimum value of the ...