Search
Now showing items 1-10 of 14
Oxidation behaviour of Sodium and Potassium choride coated Fe-C alloy at 400-700°C
(Oriental Science Publishing Company, 2003)
The studies have been conducted on the oxidation behaviour of Fe-C alloy at 400 to 700 °C in presence of alkali metal chloride salts such as sodium chloride and potassium chloride. The chloride compounds decompose at high ...
Ferrous base materials performance in seawater and its failure analysis
(Kolej Universiti Sains dan Teknologi Malaysia, 2004)
The effect of seawater to the corrosion behavior of ferrous base steel AISI 1053 have been determined at room temperature. The corrosion products were characterized by using energy-dispersed X-ray spectroscopy (EDS), and ...
First-principles study of cubic BxGa1-xN alloys
(Universiti Malaysia Perlis, 2008)
We present first-principles calculations of the structural and electronic properties
of cubic for different concentrations x of ternary alloy BxGa1-x N. The computational method is based on the full-potential linearized ...
Oxidation behaviour of 8.6 Al-Cu alloy in South China Seawater
(Sadguru Publications, 2005)
The corrosion behavior of 8.6 Al-Cu alloy was investigated in 4 different conditions of South China Seawater. The weight loss curve of alloy increases with time during the initial exposure period, due to dissolution of ...
High temperature oxidation behaviour of Nimonic - 115 Alloy in presence of Sodium salts at 850°C
(Iranian Research & Development Center for Chemical Iindustries (TRDCI), 2004)
The high temperature oxidation behaviour of Nimonic-115 industrial alloy has been investigated in presence of NaN03, NajZ03 and Na/)2 at 850°C in flowing air. The oxidation kinetics and effect of salt deposition for the ...
Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique
(Science Publications, 2008)
The microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires (Al-Si-Mg/SSw) has been investigated and focused on the both microstructures in the matrix and near to the interface and also the wetting ...
Microstructure, Properties and Fracture Mechanism of Al 2014 Reinforced with Alumina Particles
(Kolej Universiti Kejuruteraan Utara Malaysia, 2004)
The studies of microstructure, properties and fracture mechanism have been conducted on Al 2014 matrix alloy reinforced with 10 volume percent (Composite 1) and 15 volume percent (Composite 2) of alumina (Al2O3) particles ...
Nitridation of Al-Mg-Si alloys through dynamic heating
(Universiti Kebangsaan Malaysia, 2007-12)
Nitridation behaviour of Al-Mg-Si alloys as studied as a function of temperature by means of thermogravimetry method. A reactive gas, N2-4%H2 at a rate of 10 ml/min was purged into the thermogravimetry analyser chamber. ...
Oxidation behavior of SAE-1053 alloy in presence of seawater
(INSInet Publication, 2009-01)
The oxidation behavior of steel SAE-1053 alloy were investigated in presence of seawater at atmospheric condition. The rate of corrosion was varied with the water movements and the aeration. The scale morphologies were ...
Extraction mechanism of Gd3+ by BTMPPA
(Elsevier, 2006)
The extraction behavior of Gd(III) from acidic nitrate-acetato medium by bis(2,4,4-trimethylpentyl)phosphinic acid (BTMPPA, H2A2) in toluene either alone or in combination with trioctylphospine oxide (TOPO, B) has been ...