Search
Now showing items 1-10 of 16
Mechanical performances of fly ash geopolymer bricks
(American Scientific Publishers, 2013-01)
Geopolymer is a new class of three-dimensionally networked amorphous to semi-crystalline alumino-silicate materials, and first developed by Professor Davidovits in 1978. Geopolymers can be synthesized by mixing alumino-silicate ...
Lightweight fly ash-based geopolymer concrete
(Trans Tech Publications, 2013)
The experiments of this study were preformed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) using normal sand as a fine aggregate and expanded clay as lightweight aggregate. The LWAGC ...
Optimization of alkaline activator / fly ash ratio on the compressive strength of manufacturing fly ash-based geopolymer
(Trans Tech Publications, 2012)
Fly ash and a mixture of alkaline activators namely sodium silicate (Waterglass) and sodium hydroxide (NaOH) solution were used for preparing geopolymer. The aim of this research is to determine the optimum value of the ...
Compressive strength of fly ash based geopolymer / glass fiber composite via filament winding
(Trans Tech Publications, 2014)
In general, filament winding technique is used to fabricate the composite pipes using continuous fiber and matrix resin. In this study, fly ash based geopolymer resin composites reinforced by continuous glass fiber were ...
Properties of metakaolin geopolymeric binder
(American Scientific Publishers, 2013-01)
This paper investigates the physical and mechanical properties as well as the morphology study of the MK geopolymeric binder. Mixture of waterglass liquid and NaOH solution were used as the activator solution for the ...
Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature
(Trans Tech Publications, 2014)
This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...
Comparative study on thermal, compressive, and wear properties of palm slag brake pad composite with other fillers
(Trans Tech Publications, 2011)
The attractive performance-to-cost ratio associated with the incorporation of waste material in composite formulations used to produce brake pads has stimulated the idea of exploring the possible incorporation of additional ...
Alkali activated blast-furnace slag cement: The opportunity to solve sustainable issues
(American-Eurasian Network for Scientific Information, 2013)
This paper aimed at investigating the possibility of alkali activated blast-furnace
slag (BFS) to produce cement powder that could be alternative to ordinary Portland
cement. It was found that an alkali activated BFS ...
Feasibility study on composition and mechanical properties of marine clay based geopolymer brick
(Trans Tech Publications, 2014)
Geopolymer is an inorganic polymer performed in synthesis process of an aluminosilicate material which activated by alkaline activator solution. Marine clay, considered to be a waste substance which have an important ...
Effects of elevated temperatures on the thermal behavior and mechanical performance of fly ash geopolymer paste, mortar and lightweight concrete
(Elsevier, 2014-01)
This paper reports a comparative study of the influence of elevated temperature on geopolymer paste, mortars and lightweight aggregate geopolymer concrete (LWAGC) systems made by using fly ash (FA) as only source material. ...