Search
Now showing items 31-40 of 70
Low density fibrous material surface light reflectance analysis
(AENSI Publisher All rights reserved, 2013-10)
The light based surface finishing of most product measurement is an important feature in the industries. In this paper, a lab fabricated tester for investigation on the quality of low density paper which was represent by ...
Influence of oxide molar ratios on kaolin geopolymers
(American Scientific Publishers, 2013-12)
Oxide molar ratios are the main key parameter determining the performance of a kaolin geopolymers. The kaolin composition and various mixture proportions will lead to different oxide molar ratios in geopolymer system. In ...
FSS microchannel fluid flow profile investigation at high and low Re number
(AENSI Publisher All rights reserved, 2013-10)
The fundamental understanding of dynamic fluid flow behavior in different geometry channel is crucial due to transport phenomena influence on the key design and process control of the microfluidic systems. Recently, the ...
Mechanical and microstructural evaluations of lightweight aggregate geopolymer concrete before and after exposed to elevated temperatures
(MDPI, Basel, Switzerland, 2013)
This paper presents the mechanical and microstructural characteristics of a lightweight aggregate geopolymer concrete (LWAGC) synthesized by the alkali-activation of a fly ash source (FA) before and after being exposed to ...
A study on the synthesis of fly ash-based lightweight aggregate geopolymer concrete
(American Scientific Publishers All rights reserved., 2013-01)
The experiments conducting for current investigation aimed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) and explore the significance and limitations of the activator content on the ...
Study on fly ash based geopolymer for coating applications
(Trans Tech Publications, 2013)
Geopolymer is cementitious binders that do not require the presence of ordinary Portland cement (OPC). Fly ash with geopolymer formulations prepared with mixing alumino-silicate with the alkaline activator solution has ...
Mechanical properties of polymer composites with sugarcane bagasse filler
(Trans Tech Publications, 2013)
Natural fibers reinforced polymer composites have gained more interest because of their biodegradable, light weight, less expensive sources, easy processing, high specific modulus and also environmentally friendly appeal. ...
Mechanical properties of ZTA composite using cold isostatic pressing and uniaxial pressing
(Trans Tech Publications, 2013)
Alumina-zirconia composite is an engineering material with a great potential to be develop for application as high temperature resistance structural material. In this research, zirconia toughness alumina (ZTA) was produced ...
Effect of fly ash/alkaline activator ratio and sodium silicate/NaoH ratio on fly ash geopolymer coating strength
(Trans Tech Publications, 2013)
Fly ash geopolymer coating material potential used to protect surface used in exposure conditions. Ratio of fly ash/alkaline activator and Na₂SiO₃/NaOH play important parameter on determining the best flexural strength of ...
Strength of concrete based cement using recycle ceramic waste as aggregate
(Trans Tech Publications, 2013)
The main focus of this research is to study the strength of concrete with ceramic waste as coarse aggregate. The sources of ceramic waste are obtained from the industrial in Malaysia. Presently, in ceramics industries the ...