Now showing items 1827-1846 of 3115

    • Microwave sintering of pure iron with addition of stearic acid as binder 

      Wan Abdul Rahman Assyahid, Wan Ibrahim; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2012)
      The purpose of this study is to investigate the effect of the stearic acid as binder in sintering pure iron using a microwave furnace. The study was focused in mechanical properties such as porosity, density and micro-hardness ...
    • Microwave-induced substitutional-combustion reaction of Fe3O4/Al ceramic matrix porous composite 

      Lee, Chang Chuan; Yoshikawa, N.; Taniguchi, S. (Springerlink, 2011-11)
      Microwave processing and substitutional-combustion reaction have been utilized to fabricate ceramic matrix porous composite from the thermite reaction of Fe3O4/Al system. Stoichiometric and mixtures with lower and over ...
    • Milled groove square shape conformal cooling channels in injection molding process 

      Shayfull Zamree, Abd. Rahim; Safian bin Sharif, Prof. Dr.; Azlan, Mohd Zain, Dr.; Rozaimi, Mohd. Saad; Ahmad Fairuz, Mansor (Taylor and Francis Group, LLC., 2013-08)
      In designing molds for injection molding process, it is very difficult to achieve efficient cooling with uniform thermal distribution. To overcome these issues, the uses of conformal cooling channels with the uniform ...
    • A MIMO LMS adaptive equalization approach in simulated radar emission 

      Junita, Mohd Nordin; Anuar, Mat Safar; Azremi, Abdullah Al Hadi; Norshaida, Ahmad; Shariffah Zarihan, Syed Zaharim Helmi; Bukhairi, M.N (Institute of Electrical and Electronics Engineering (IEEE), 2006)
      MIMO technology has attracted a lot of attention in the area of wireless communications such as radar applications, in term of increasing the spectral efficiency. This research paper will present the model of Simulated ...
    • Mineralization of diazo dye (Reactive Black 5) in wastewater using recirculated up-flow constructed wetland reactor 

      Ong, Soon An, Dr.; Ho, Li Ngee, Dr.; Wong, Yee Shian; Chen, Siaw Fun; Viswanathan, Murali; Rohazita, Bahari (Desalination Publications, 2012)
      Application of a sequential anaerobic and aerobic process in a constructed wetland can enhance the treatment performance of textile wastewater. In this study, two laboratory-scale recirculated up-flow constructed wetland ...
    • Mineralization of Methyl Orange-containing wastewater by integrated anaerobic and aerobic processes using spent granular activated carbon-biofilm under sequencing batch reactor operation 

      Ong, Soon An, Dr.; Ho, Li Ngee, Dr.; Wong, Yee Shian; Raman, Komalathevi; Rohazita, Bahari (Taylor & Francis, 2013)
      Mineralization of azo dye required combination of anaerobic and aerobic processes either in two stages or single stage of treatment. The aim of the present study was to evaluate the treatment performance in the decolorization ...
    • Mineralogical characterizations of Langkawi Ilmenite ore for carbothermal reduction 

      A. I., Mohammed; M. A., Idris; Z. A. Z., Jamal; N. F., Hayazi; T., Nomura (Universiti Malaysia Perlis (UniMAP), 2022-01)
      The mineralogical characterizations of Langkawi’s ilmenite were investigated using XRD, XRF and SEM/EDS for morphological analysis. The minerals mainly consist of the phases of FeTiO3, Fe3O4 and TiO2 by Rietveld refinement, ...
    • Minimization of open circuit voltage fluctuation of quantum dot based solar cell using InN 

      Farah Ayuni, Rosli; Mohd Abdur Rashid, Dr.; Mohd Fareq, Abd. Malek, Dr.; Muzaidi, Othman @ Marzuki; Ahmad Zaidi, Abdullah, Engr.; Md. Abdullah, Al Humayun (Trans Tech Publications, 2013)
      This paper reports the improvement of open circuit voltage stability of solar cell using InN based quantum dot in the active layer of the device structure. We have analyzed theoretically the temperature dependence of the ...
    • Minimizing correlation effect using zero cross correlation code in spectral amplitude coding optical code division multiple access 

      Anuar, Mat Safar, Ir. Dr.; Syed Alwee Aljunid, Syed Junid, Prof. Dr.; Amir Razif Arief, Jamil Abdullah, Dr.; Junita, Mohd Nordin; Mohamad Naufal, Mohamad Saad, Assoc. Prof. (The Optical Society of Japan, 2012-01)
      The use of minimal multiple access interference (MAI) in code design is investigated. Applying a projection and mapping techniques, a code that has a zero cross correlation (ZCC) between users in optical code division ...
    • Minimum input variances for modelling rainfall-runoff using ANN 

      Zulkarnain, Hassan; Supiah, Shamsudin, Assoc. Prof.; Sobri, Harun, Prof. Madya Dr. (Penerbit UTM Press, 2014)
      This paper presents the study of possible input variances for modeling the long-term runoff series using artificial neural network (ANN). ANN has the ability to derive the relationship between the inputs and outputs of a ...
    • Missing values imputation for wind speed 

      Nur Arina Bazilah, Kamisan; Siti Mariam Norrulashikin; Siti Fatimah, Hassan (Institute of Engineering Mathematics, Universiti Malaysia Perlis, 2021-12)
      Addressing missing values is important in the process of getting a precise and accurate result. If missing data are not treated appropriately, then the results could lead to biased estimates. But different series may require ...
    • Mission Possible: Using Ubiquitous Social Goal Sharing Technology To Promote Physical Activity In Children 

      Mackintosh, Kelly; Nieze, Gerrit; Eslambolchilar, Parisa (Kementerian Pendidikan Tinggi (KPT), Malaysia, 2016)
      Objective: The present study investigates the acceptability of a novel ubiquitous social goal-sharing intervention aimed at promoting physical activity (PA) in schoolchildren. Methods: Thirty children (18 boys; 10.1±0.3 ...
    • Mitigating interference in a heterogeneous wireless network using channel selection 

      Mohd. Najmuddin, Mohd. Hassan, Dr.; Latifah Munirah, Kamarudin, Dr.; Ammar, Zakaria (AENSI Publisher All rights reserved, 2013-10)
      With the extensive development of heterogeneous wireless communication technology, combined with the advances of data acquisition, emerges a new trend of networked acquisition systems. Among this range of wireless technology, ...
    • Mixed-Motivation Factors on Academic Research Commercialisation in Malaysian Technical Universities 

      Saida Farhanah Sarkam; Noorulsadiqin Azbiya Yaacob; Siti Norezam, Othman; Rafidah, Abdul Azis (School of Business Innovation and Technopreneurship, Universiti Malaysia Perlis (UniMAP), 2018-10)
      Commercialisation had become one of the main activities for academics. Besides generating income for the university, academic research commercialisation is able to boost up the nation economic gains and quality of life. ...
    • Mixing optimization of Sn-Cu-Si₃N₄ via powder metallurgy route for composite solder fabrication 

      Muhammad Hafiz, Zan Hazizi; Mohd Arif Anuar, Mohd Salleh; Zainal Arifin, Ahmad, Prof. (Trans Tech Publications, 2014)
      The aim of this study was to optimize the mixing process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si₃N₄ were carefully weighted, ...
    • Model gelagat pengguna Islam 

      Siti Khalilah, Basarud-din; Azizi, Abu Bakar (Center for Communication Technology and Human Development (UniMAP), 2019)
      Teori gelagat pengguna yang dibangunkan oleh sarjana pemikiran barat sering digunakan secara meluas dalam pelbagai bidang kajian termasuklah kajian dari perspektif Islam. Persoalannya, adakah gelagat pengguna konvensional ...
    • Model usahawan berjaya dalam amalan nilai-nilai murni keusahawanan sosial Islam 

      Mohd Adib, Abd Muin; Azizi, Abu Bakar; Shuhairimi, Abdullah (Center for Communication Technology And Human Development (UniMAP), 2014)
      Bidang keusahawanan sosial Islam adalah salah satu cabang di bawah konteks Muamalah di mana ianya dikenal pasti sebagai pemangkin yang berpontensi besar dalam membangunkan ekonomi ummah sejagat. Islam memandang berat tentang ...
    • Modeling and simulation of the Queuing System at University Parcel Centre (UPC) 

      Nurul Nazihah, Hawari; Lye, Lee Chen; Nurfarahhanis, Shaiful Nizad (Institute of Engineering Mathematics, Universiti Malaysia Perlis, 2021-12)
      The purpose of this study is to model and simulate the parcel collection process at the University Parcel Center (UPC) using a Discrete Event Simulation (DES) approach. At UPC, upon arrival, students will join the queue ...
    • Modeling approach to the elements of TQM practice 

      Fazlollah, Agamohamadi Basmenj; Rosnah, Mohd Yusuff, Assoc. Prof. Dr.; Norzima, Zulkifli, Dr.; Md. Yusof, Ismail; Sorooshian, Shahryar (Trans Tech Publications, 2013)
      This paper considers three factors; the selection of the Performance Measures, selection of the Critical Success Factors, and selection of quality tools as three elements of TQM. The qualitative research of this study tries ...
    • Modeling development of a high-sensitivity escherichia coli O157:H7 detection based on SH SAW sensor 

      Seng Teik, Ten; Uda, Hashim, Prof. Dr.; Ahmad Sudin; Wei Wen, Liu; Kai Loong, Foo; N.H.M. Salleh; Hasrul, Hisham; Nazwa, T. (Trans Tech Publications, 2014-04)
      Surface acoustic waves based devices were initially developed for the telecommunication purpose such as signal filters and resonators. The acoustic energy is strongly confined on the surface of the surface acoustic waves ...