Browsing Journal Articles by Title
Now showing items 2062-2081 of 2769
-
A preliminary study of factors influencing the intention to adopt islamic financing facilities among Halal-Certified companies in Malaysia
(School of Business Innovation and Technopreneurship, Universiti Malaysia Perlis (UniMAP), 2023-06)Halal business and Islamic finance adhere to the same fundamental principles and core beliefs. However, there is a divergence between these two industries, particularly in Malaysia, where the utilisation and adoption ... -
Preliminary Study of Trong Clay – HA Bone Scaffold Fabrication Using Solvent Casting/Particulate Leaching Method and Indirect 3D-Printing Technique
(Universiti Malaysia Perlis (UniMAP), 2018)This paper is about the feasibility of using the combination of Trong clay and hydroxyapatite for the fabrication of bone tissue scaffold. Trong clay is one of Perak’s (a state in Malaysia) natural resources which can be ... -
Preliminary study on cutting solid object using water at pressure exceeding 1000 MPa
(Trans Tech Publications, 2012)To date, the highest pump pressure available in market is 648 MPa from FLOW International Corp. Cutting with ultra high pressure reduces abrasive usage, faster cutting speed, increased depth of cuts and increase efficiency. ... -
A Preliminary study on feasibility radar cross-section of foreign object debris for size classification
(Universiti Malaysia Perlis (UniMAP), 2021-12)In this paper, a preliminary evaluation study is conducted, which aiming to investigate the radar cross-section (RCS) value that is capable to be used as an input parameter for Artificial Neural network (ANN) backpropagation ... -
A preliminary study on structural and optical properties of heat treated NB2O5 nanostructure
(Universiti Malaysia Perlis (UniMAP), 2023-01)Annealing is a heat treatment that alters the physical and sometimes chemical properties of a material to improve their crystalline structure and other important properties. This work presents the effect of post heat ... -
Preparation and characterisation of activated carbon from rambutan seed (Nephelium Lappaceum) by chemical activation
(Universiti Malaysia Perlis (UniMAP), 2012)Activated carbons were prepared from rambutan seed by chemical activations with ZnCI2 as dehydrating agent. In order to find its characteristic, different impregnation ration of ZnCI2 to rambutan seed (0.5 and 2) and ... -
Preparation and characterisation of polyamide 11/montmorillonite (MMT) nanocomposites for use in angioplasty balloon applications
(Elsevier B.V., 2013-12)With increased demands on catheter balloon functionality, there is an emphasis to blend new materials which can improve mechanical performance. Polymer nanocomposites were prepared by melt blending polyamide 11 (PA 11) ... -
Preparation and characterization of Co-HA powder using modified electroless method
(Trans Tech Publications, 2014)C0-HA composite produced by simple electroless deposition method was studied. From the particle size analysis by Malvern particles analyzer its shows that 19% increment in average of the particle size powder increase after ... -
Preparation and characterization of electrical, morphological and topographic properties for advanced conductive PMMA/PVDF/PANI ternary blend for low percolation threshold devices
(Universiti Malaysia Perlis (UniMAP), 2019-10)The presented work targets on developing an advanced conductive polymer blend. This polymer has a low permeation threshold at low concentrations of conductive polymer. Two groups of polymer blend, consist of a mixture ... -
Preparation and Characterization of Magnetite (Fe3O4) nanoparticles By Sol-Gel Method
(Universiti Malaysia Perlis (UniMAP), 2019-01)The magnetite (Fe3O4) nanoparticles were successfully synthesized and annealed under vacuum at different temperature. The Fe3O4 nanoparticles prepared via sol-gel assisted method and annealed at 200-400ºC were characterized ... -
Preparation and characterization of nanostructured ITO Thin Films by Spray Pyrolysis Technique: Dependence on annealing temperature
(Universiti Malaysia Perlis (UniMAP), 2023-01)Transparent conducting oxides (TCOs) like Indium tin oxide (ITO) have wide attention from all scientists which have low resistance and high visible light transmittance, used as transparent electrodes in many optoelectronic ... -
Preparation and characterization of silica aerogel immobilized with cyanex 301 for extraction of Zn(II)
(Trans Tech Publications, 2013)A new solid phase extractant silica aerogel immobilized with Cyanex 301 {bis(2,4,4- trimethylpentyl) dithiophosphinic acid} (SAWC) was prepared via a sol- gel method and investigated for the extraction of Zn(II) from aqueous ... -
Preparation and investigation of gold nanoparticles by the technique of laser ablation for biological application
(Universiti Malaysia Perlis (UniMAP), 2022-07)This paper utilises environmentally friendly and cost-effective methods for the synthesis of gold nanoparticles (AuNPs) using distilled water (DW) solution via liquid pulse laser ablation (PLAL) technique with wavelength ... -
Preparation and properties of porous calcium phosphate
(Universiti Malaysia Perlis, 2008)In this study, preparation of porous calcium phosphate was involved the addition of sodium di-hydrogen phosphate, NaH2PO4 and di-sodium hydrogen phosphate, Na2HPO4 into the raw calcium phosphate powder. The sodium hydrogen ... -
Preparation of CdSe quantum dots using laser ablation technique for Dye-Sensitized Solar Cell
(Universiti Malaysia Perlis (UniMAP), 2021-01)Organic dyes are known to be widely used in the manufacture of dye-sensitized solar cells. However, theoretical screening does not play an essential role in dyes design. This work seeks to improve the conversion efficiency ... -
Preparation of cyciopentyi trisiianoi siisesquioxanes - modified natural rubber (CpSSQ(OH)3 - ENR-50) composite hybrid in the presence of HCI acid
(Trans Tech Publications, 2013)A composite comprising cyclopentyl trisilanol siisesquioxanes (CpSSQ(OH)3) and 50% epoxidized natural rubber (ENR-50) was prepared at reflux temperature employed hydrochloric acid (HCl) as catalyst. HCl was found to be an ... -
Preparation of GNPs thermally conductive adhesive at different epoxy resin/curing agent ratio and mixing method
(Universiti Malaysia Perlis (UniMAP), 2021-08)Reinforcement of GNPs fillers to polymer composite show remarkable improvement in thermal conductivity. However, high aspect ratio of GNPs attributes to agglomerate during the preparation process, which limits its ... -
Preparation of photoelectrochemical cell of ITO/Cu2O/PVC-LiClO4/graphite using Cu2O films as an active layer
(Trans Tech Publications, 2014-02)Cuprous oxide (Cu2O) thin films were successfully grown on indium tin oxide (ITO) coated glass by sol-gel spin coating using diethanolamine (DEA) as a solubility agent. The films were annealed at 350 °C in 5% H2 + 95% N2 ... -
Preparation of ZnO nanodisks using hydrothermal method and sensing to reductive gases
(Springer Science+Business Media New York, 2014-10)ZnO nanodisks exhibiting regular hexagonal structures were successfully synthesized using two surfactants via a hydrothermal method. The surfactants, namely, cetyltrimethylammonium bromide and sodium dodecyl sulfate, had ... -
Preparation, characterization, and electrical conductivity investigation of multi-walled carbon nanotube-filled composite nanofibres
(Universiti Malaysia Perlis (UniMAP), 2021-08)There is a growing interest in carbon nanofibre materials especially for applications that require high surface area, excellent chemical inertness, and good electrical conductivity. However, in certain applications a ...