Browsing Journal Articles by Subject "Mechanical properties"

Now showing items 21-27 of 27

    • Potential Of Electron Beam Irradiated HDPE/EPR Blend As Shoes Sole 

      Husniyah Aliyah, Lutpi; Hazleen, Anuar (Kementerian Pendidikan Tinggi (KPT), MalaysiaDepartment of Manufacturing and Materials Engineering, Faculty of Engineering, International Islamic University Malaysia ; School of Applied Physics, Faculty of Science and Technology, National University of Malaysia,, 2014)
      This study focuses on the mechanical effect of different composition of polymer blend. Polymer blend of high density polyethylene (HDPE) and ethylene propylene rubber (EPR) were selected and varied by three different ...

    • Recycled copper as the conductive filler in polyester composites 

      Teh, Pei Leng; Ng, H. T.; Yeoh, Cheow Keat (Universiti Teknologi Malaysia, 2011-03)
      In this study, the effect of recycled copper on the electrical, mechanical and thermal stability properties of the polyester composites was investigated. Electrical conductivity results revealed that increasing in ...

    • The structural, electronic and mechanical properties of 𝜶�� and 𝜷�� phases in titanium using density functional theory 

      N. A., Malik; M., Yahaya; N. N., Alam; M. H., Ismail; O. H., Hassan; A. M. M., Ali; M. H., Samat; M. F. M., Taib (Universiti Malaysia Perlis (UniMAP), 2020-12)
      In this paper, the structural, electronic and mechanical properties of 𝛼 and 𝛽 phases in titanium (Ti) with the space group of P63/mmc and Im3m were computed by using first-principles calculations through density functional ...

    • Sulfuric acid attack on ordinary Portland cement and geopolymer material 

      Mohd Izzat, Ahmad; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Sandu, Andrei Victor; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Muhammad Faheem, Mohd Tahir; Moga, Ligia Mihaela (Institute for Scientific Information (ISI), 2013-09)
      The resistance of ordinary Portland cement binder towards acid had been widely discussed by researchers. The deterioration effect of this binder may cost high repair expense and rehabilitation. Geopolymer material is a new ...

    • Tensile properties of kenaf/unsaturated polyester composites filled with a montmorillonite filler 

      Rozman, Haji Din, Prof.; Luqman, Musa, Dr.; Azniwati, A. A.; Rozyanty, Abdul Rahman (Wiley Periodicals, Inc., 2011-03-05)
      Kenaf/unsaturated polyester composites filled with montmorillonite (MMT) filler were produced. Overall, the study showed that, for samples with kenaf filler only, the strength properties decreased as the kenaf filler loading ...

    • Wettability, electrical and mechanical properties of 99.3Sn-0.7Cu/Si 3N4 novel lead-free nanocomposite solder 

      Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairel Rafezi, Ahmad, Dr.; Mohd Arif Anuar, Mohd Salleh; Muhammad Hafiz, Hazizi; Zainal Arifin, Ahmad, Prof. Dr. (Trans Tech Publications, 2011-07-04)
      A nanocomposite solder alloy with 99.3Sn-0.7Cu base alloy was successfully fabricated using the powder metallurgy route which consists of blending, compaction and sintering. Varying amount of nano size silicon nitride ...

    • Yttria stabilized zirconia formed by micro ceramic injection molding: Rheological properties and debinding effects on the sintered part 

      Farhana, Mohd Foudzia; Norhamidi, Muhamada; Abu Bakar, Sulong; Hafizawati, Zakaria (Elsevier, 2013-04)
      Micro Ceramic Injection Molding (μCIM) is a near net-shape process to produce smaller and intricate parts at a competitive cost. The application of nano-sized ceramic powder in μCIM has the advantages of fine grain size ...