Now showing items 41-60 of 153

    • Automated Car Safety Enhancement System 

      Ooi Hooi Shih (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Automated Car Safety Enhancement Systems (ACSES) is a system that designed to prevent accidents or to minimize the force and damage of collision in case of accidents. The goal of this system is to help avoiding vehicle ...
    • Study and Design the Current Mirror using Bulk-Driven Technique for Low Voltage Analog 

      Mohd Faidzul Bukhari Mohd Kanafiah (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Current Mirrors are core structure for almost all analog and mixed mode circuits and the performance of analog structures largely depends on the characteristic. In this design, the design presents some of the low voltage ...
    • Improvement of SiGe HBT Design and Technology Performance using Device Simulation 

      Nurradila Ramlan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Simulation of the effect of various design parameters on the performance of the HBT is essential for obtaining the optimized design. This is based on the requirement for a reliable computation of the HBT performance. ...
    • Design and Implementation of a VGA Display Generator Using FPGA 

      Haslinda, Hassan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      This project is an implementation of a VGA display generator, using FPGA device. The goal of this project is to design a simple video image. The image is a square ball shape in red color that bounces up and down the ...
    • Study in Design of 32 X 4Bit Static Random Access Memory (SRAM) 

      Nor Bashariah Muhamad Bakhtiar (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Study in design Static Random Access Memory (SRAM) using Mentor Graphic and simulation process with Eldo simulator. The research made on the operation of six transistors, its advantage over Dynamic Random Access Memory ...
    • Design of Control Circuit for an Inverter 

      Nurfaiza Hanim Mohd Saleh (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      This thesis develops sinusoidal pulse width modulation (SPWM) technique switching for single phase bridge inverter. This technique is design using (VHDL) programming with Altera Quartus II environment. A general framework ...
    • Analysis of Switched Mode Power Supply (SMPS) with Energy Saving Requirement 

      Ang Swee Liew (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Nowadays, the Switched-Mode Power Supply (SMPS) plays an important role in the consumer power market. With its small size, it can be found everywhere from mobile phone chargers to Plasma TVs or even in compact dics players ...
    • The study of the effect of MOS transistor scaling on the critical device parameters 

      Zazurina Abd Rahman (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Since the invention of transistors some 30 years ago, CMOS devices have been scale down aggressively in each technology generations to achieve higher integration density and performance. The device shrinkage allow denser ...
    • 8-bits X 8-bits modified Booth 1’s complement multiplier 

      Norafiza Salehan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      With advances in technology, many researchers have tried and are trying to design multipliers which offers either of following – high speed, low power consumption, regularity of layout and hence less area or even combination ...
    • FPGA Implementation of Emergency Door Car Entry System 

      Zaini Sulaiman (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2007-05)
      Emergency door car entry system can be implemented using Field Programmable Gate Array (FPGA) board. FPGA board is a board that can be programmed using source code to run the application that has been downloaded into it. ...
    • Mems Microrelay: Design, Modeling, and Simulation 

      Yap David (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      A newly design of single pole single throw piezoelectric vertical actuation MEMS microrelay was successfully designed and modeled at the end of this project. This was implemented by using MEMS Pro LEdit CAD Modeler. Then, ...
    • Comparison of Various Barrel Shifter 

      Abg Muhd Zakaria, Abg Abdul Wahed (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      Barrel shifters are often utilized by embedded digital signal processors and general-purpose processors to manipulate data. This project design alternatives for 16 bit barrel shifters that perform the following function ...
    • Investigation and Modeling of Boron Diffusion Reduction in Silicon by Flourine Implantation using Numerical Simulation 

      Chuah Soo Kiet (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      With the increased interest in the use of fluorine co-implantation with boron for boron diffusion reduction in the fabrication of semiconductor devices, it is important to understand the mechanisms by which fluorine ...
    • 16-Bits Carry Look-Ahead Adder as a High Speed Adder 

      Normala Muhd. Hussain (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      This paper put emphasis on designing a modified carry look-ahead adder (CLA) to acquire a high speed carry look ahead in seeing as speed is the significant characteristics to a Central Processor Unit. After some historical ...
    • A Study on Surface Roughness and Morphology of Galliumoxide Doped Ba0.5Sr0.5TiO3 Thin Film 

      Fadrul Hisham Mohd Fauzi (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      Thin films of perovskite BaxSr1−xTiO3 system are promising candidates for microelectronic devices that can be integrated to semiconductor circuits. The leadfree solid solution BaxSr1−xTiO3 (BST) is a high permittivity ...
    • Simulation Of 0.35 Um NMOS Process Based on UniMAP Cleanroom Facilities 

      Izny Atikah Ahmad Fahmi (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      The Micro Fabrication Cleanroom in University Malaysia Perlis (UniMAp) was completed in December 2003 and was built as a teaching laboratory. The goal of this project is to simulate a 0.35um negative-metal-oxide-semiconductor ...
    • Hardware Implementation of Intelligent Traffic Light Controller 

      Noorrashikin Jaafar (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      Traffic signal controller is playing more and more important roles in modern management and controls of urban traffic to reduce the accident and traffic jam in road. The traffic light controller is a sequential machine ...
    • High speed 8-bits x 8-bits Wallace Tree multiplier 

      Tajul Hamimi Harun (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      This final year project (FYP) is to analyze the design of Wallace Tree multiplier. For simplicity, unsigned operands are chosen and main focus on the short word widths commonly used in most applications: an 8-bit multiplier. ...
    • Comparison of Speed on 5 Adder Architectures 

      Norina Mohd Yusoff (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      Adders are some of the most critical data path circuits in CPU to perform data processing. The faster the adder, the better it performs data processing. The project presents a novel of comparison analysis on speed of ...
    • Serial Peripheral Interface (SPI) (Front End Design) 

      Mohd Noorkasyfi Md Shariff (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008)
      The Serial Peripheral Interface Bus or SPI bus is a synchronous serial data link. This device is one of ASIC design chip that have in the market. In this final year project the new form of device will be created from the ...