The effectiveness of Sodium Benzoate as corrosion inhibitor for stainless steel in seawater environment
Date
2005-12-21Author
H. B., Senin
S.Y., Seoh
Mohammed Misbahul, Amin
Metadata
Show full item recordAbstract
The inhibitive properties of sodium benzoate for stainless steel controlling corrosion have been studied in seawater at room temperature. Three sets of sample have been prepared with the concentrations of 0.3M, 0.6M and 1.0M of sodium benzoate, respectively. One set of sample has been prepared without adding any sodium benzoate. This is to enable a comparison of the inhibited environment's rate of corrosion to be made. It was found that the highest corrosion rate was observed for the stainless steel with no inhibitor was added to the seawater. The corrosion rate decreases as the concentration of sodium benzoate being increased. Results have shown that by the addition of 1.0M of sodium benzoate in seawater samples, is giving > 90% efficiencies.
Collections
- Conference Papers [2600]
Related items
Showing items related by title, author, creator and subject.
-
A study case of dissimilar welding between mild steel ( Low Carbon Steel ) and stainless steel on hardness vickers and tensile shear test for gas tungsten arc welding ( GTAW )
Ahmad Safwan, Salim (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of the dissimilar weld joint design, edge preparation and joint dimension on the weldability of Gas Tungsten Arc Welding ( GTAW ) between mild steel and stainless ... -
Mechanical properties of dissimilar welds between stainless steel and mild steel
Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Shahzan Kamarul, A. Kadir; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ... -
Classification of stainless steel and mild steel using vibration technique
Intan Maisarah, Abd Rahim (Universiti Malaysia Perlis (UniMAP)School of Mechatronic Engineering, 2011)The production of material in industry must attain some standard such as the standard required by American Society for Testing and Materials (ASTM) International. The requirement of the material standard is important in ...