Search
Now showing items 1-10 of 32
Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature
(Trans Tech Publications, 2014)
This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...
Effect of NaOH concentration on microstructure of boiler ash based geopolymer
(Trans Tech Publications Ltd., 2015)
Boiler ash is one of the waste material from palm oil processing industry and it was widely available. The role of alkaline activator in geopolymer is important for its mechanical properties. NaOH and sodium silicate ...
Chemical and physical characterization of boiler ash from palm oil industry waste for geopolymer composite
(Syscom 18 SRL/ SC BIBLIOTECA CHIMIEI SA, 2013-12)
The characterizations of boiler ash waste from waste of palm oil industry were performed. The boiler ash was obtained from the boiler in the palm oil processing factory. The chemical and physical characterization has been ...
Microstructure study on volcano ash geopolymer aggregate at different sintering temperature
(Trans Tech Publications, 2014)
Recent research shows that the by-product materials such as fly ash can be used as raw material in producing aggregates and lightweight aggregates. The usage of this material can improve the quality of the aggregates ...
Influence of dolomite on the mechanical properties of boiler ash geopolymer paste
(Trans Tech Publications, 2014)
The waste material from palm oil industry has been increasing since Malaysia was the world largest exported of palm oil mill. The waste such as palm fibers, nut shells, palm kernel and empty fruit bunches are the solid ...
Effect on strength and hardness of clay ceramic substrate after treatment using koalin based geopolymer glaze
(Trans Tech Publications, 2014)
Geopolymerization is an alternative for ceramic industry by using clay based material such as kaolin or calcined kaolin geopolymer. Geopolymer paste is initially produced by alkaline activation of calcined kaolin with NaOH ...
The relationship of NaOH molarity, Na2SiO3/NaOH ratio, fly ash/alkaline activator ratio, and curing temperature to the strength of fly ash-based geopolymer
(Trans Tech Publications, 2011)
Geopolymer, produced by the reaction of fly ash with an alkaline activator (mixture of Na2SiO3 and NaOH solutions), is an alternative to the use of ordinary Portland cement (OPC) in the construction industry. However, there ...
Reviews on the different sources materials to the geopolymer performance
(AENSI Publisher All rights reserved, 2013-10)
Geopolymer is manufactured from the aluminosilicate source material in example fly ash, silica fume, kaolin, ground granulate blast slag (GGBS), boiler ash and volcano ash reactivated via alkaline solution. But the different ...
Effect of Solids-To-Liquids, Na2SiO3-To-NaOH and Curing Temperature on the Palm Oil Boiler Ash (Si + Ca) Geopolymerisation System
(MDPI AG, 2015)
This paper investigates the effect of the solids-to-liquids (S/L) and Na2SiO3/NaOH ratios on the production of palm oil boiler ash (POBA) based geopolymer. Sodium silicate and sodium hydroxide (NaOH) solution were used as ...
A Review on the Manufacturing of Lightweight Aggregates Using Industrial By-Product
(EDP Sciences, 2016-10)
The waste materials from industrial are one of the concern issues in sustainable development. Recycle and reduce the waste material is one of the strategies to produce the better sustainable system. One of the methods is ...