Browsing Mohd Mustafa Al Bakri Abdullah, Prof. Dr. by Author "arifanuar@unimap.edu.my"
Now showing items 1-18 of 18
-
Bonding strength characteristics of FA-based geopolymer paste as a repair material when applied on OPC substrate
Warid Wazien, Ahmad Zailani; Bouaissi, Aissa; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abd Razak; Yoriya, Sorachon; Mohd Arif Anuar, Mohd Salleh; Mohd Remy Rozainy, M. A. Z.; Hamzah, Fansuri (MDPI AG, 2020-05)This investigative study aims to study the mechanical and morphological properties of fly ash (FA)-based geopolymer paste as a repair material when applied on ordinary Portland cement (OPC) overlay concrete. The first ... -
Compaction optimization of Sn-Cu-Si3N4via powder metallurgy route for composite solder fabrication
Muhamad Hafiz, Zan @ Hazizi; Mohd Arif Anuar, Mohd Salleh; Zainal Arifin, Ahmad, Prof.; Mohd Mustafa Al-Bakri, Abdullah; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)The aim of this study was to optimize the compaction process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si3N4 were carefully ... -
A comparative study of solder properties of Sn-0.7Cu lead-free solder fabricated via the powder metallurgy and casting methods
Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Sandu, Andrei Victor; Norainiza, Saud; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; McDonald, Stuart D.; Nogita, Kazuhiro (Syscom 18 SRL, 2013-07)The properties of Sn-0.7Cu solder bulk prepared via the powder metallurgy (PM) method were investigated and compared with solder bulk fabricated through casting. Distinct microstructures were observed in both PM and casting ... -
Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature
Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Zarina, Yahya; Mohd Arif Anuar, Mohd Salleh; Nurhamidah, Zakaria; Muhammad Faheem, Mohd Tahir (Trans Tech Publications, 2014)This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ... -
The effect of thermal annealing on the microstructure and mechanical properties of Sn-0.7Cu-xZn solder joint
Mohd Izrul Izwan, Ramli; Mohd Arif Anuar, Mohd Salleh; Rita, Mohd Said; Mohd Mustafa Al Bakri, Abdullah; Dewi Suriyani, Che Halin; Norainiza, Saud; Nabiałek, Marcin (MDPI AG, 2021-02)The microstructural properties of a Pb-free solder joint significantly affect its mechanical behaviours. This paper details a systematic study of the effect of the annealing process on the microstructure and shear strength ... -
Effects of cure characteristics, mechanical and morphological properties of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends
Ahmad Azrem, Azmi; Nik Noriman, Zulkepli, Dr.; Muhammad Razif, Nordin; Mohd Mustafa Al Bakri, Abdullah; Sandu, Ion; Mohd Arif Anuar, Mohd Salleh; Hanafi, Ismail (Revista De Materiale Plastice, 2013-09)The effects of tensile and morphological properties of styrene butadiene rubber/virgin chloroprene rubber blends (SBR/CRv) and styrene butadiene rubber/recycled chloroprene rubber blends (SBR/CRr) were investigated. The ... -
Effects of Recycled-Aluminium additions on the mechanical properties of Sn-0.7Cu/Cu-Substrate lead-free solder joints
Mohd Arif Anuar, Mohd Salleh; Somidin, Flora; Mohd Mustafa Al Bakri, Abdullah; Nik Noriman, Zulkepli; Mayappan, Ramani; Noor Farhani, Mohd Alui (Trans Tech Publications, 2013)Varying amount of recycled-Aluminium (0, 3.0, 3.5 and 4.0 wt.% re-Al) particulates produced from aluminium beverage cans were successfully reincorporated into Sn-0.7Cu base matrix solder material via powder metallurgy ... -
Influence of kaolin geopolymer ceramic additions to the wettability and electrical properties of Sn-3.0Ag-0.5Cu (SAC305) lead free solder
Nur Syahirah, Mohamad Zaim; Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Marliza, Mostapha; Romisuhani, Ahmad (IOP Publishing Ltd, 2019-12)The effect of kaolin geopolymer ceramic addition to the wettability and electrical resistivity of Sn-3.0Ag-0.5Cu (SAC305) lead free solder was successfully explored. Powder metallurgy with microwave sintering method was ... -
Mechanical properties of Sn-0.7Cu/Si 3N 4 lead-free composite solder
Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al-Bakri, Abdullah; Muhammad Hafiz, Zan Hazizi; Flora, Somidin; Noor Farhani, Mohd Alui; Zainal Arifin, Ahmad, Prof. (Elsevier B.V., 2012-10)The use of reinforcing high performance ceramic particulates in monolithic lead-free solder is one way to improve the service temperature and mechanical behavior of a solder joint. In this study, various compositions of ... -
Mechanical properties of ZTA composite using cold isostatic pressing and uniaxial pressing
Mohd Mustafa Al-Bakri, Abdullah; Ahmad Fauzi, Mohd Noor, Prof. Dr; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Norazian, Mohamed Noor; Mohd Arif Anuar, Mohd Salleh; Alida, Abdullah (Trans Tech Publications, 2013)Alumina-zirconia composite is an engineering material with a great potential to be develop for application as high temperature resistance structural material. In this research, zirconia toughness alumina (ZTA) was produced ... -
Microstructure studies on different types of Geopolymer materials
Mohd Mustafa Al Bakri, Abdullah; Adila, Abdullah; Muhammad Faheem, Mohd Tahir; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Mohd Arif Anuar, Mohd Salleh; Sandu, AV (Trans Tech Publications, 2013)Geopolymer is a new binding material produced to substitute the ordinary Portland cement (OPC) function as a binder in concrete. As we know, different types of geopolymer will have different properties. In this research, ... -
Nickel (Ni) microalloying additions in Sn-Cu lead-free solder. short review
Mohd Arif Anuar, Mohd Salleh; Sandu, I G; Mohd Mustafa Al Bakri, Abdullah; Sandu, I (IOP Publishing Ltd, 2017-06)In this digital-age era, solder plays important role in electronic packaging industries. As interconnects material, solder provide an electrical and mechanical support to the electronics devices. Solder usually consist of ... -
Performance of Sn-3.0Ag-0.5Cu composite solder with kaolin geopolymer ceramic reinforcement on microstructure and mechanical properties under isothermal ageing
Nur Syahirah, Mohamad Zaimi; Mohd Arif Anuar, Mohd Salleh; Sandu, Andrei Victor; Mohd Mustafa Al Bakri, Abdullah; Norainiza, Saud; Shayfull Zamree, Abd Rahim; Vizureanu, Petrica; Rita, Mohd Said; Mohd Izrul, Izwan Ramli (MDPI AG, 2021-02)This paper elucidates the effect of isothermal ageing at temperature of 85 °C, 125 °C and 150 °C for 100, 500 and 1000 h on Sn-3.0Ag-0.5Cu (SAC305) lead-free solder with the addition of 1 wt% kaolin geopolymer ceramic (KGC) ... -
Preparation of cyciopentyi trisiianoi siisesquioxanes - modified natural rubber (CpSSQ(OH)3 - ENR-50) composite hybrid in the presence of HCI acid
Rosniza, Hamzah; Mohamad, Abu Bakar, Prof.; Nik Noriman, Zulkepli, Dr.; Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al-Bakri, Abdullah (Trans Tech Publications, 2013)A composite comprising cyclopentyl trisilanol siisesquioxanes (CpSSQ(OH)3) and 50% epoxidized natural rubber (ENR-50) was prepared at reflux temperature employed hydrochloric acid (HCl) as catalyst. HCl was found to be an ... -
Research advances of composite solder material fabricated via powder metallurgy route
Mohd Arif Anuar, Mohd Salleh; Muhammad Hafiz, Hazizi; Mohd Mustafa Al Bakri, Abdullah; Nik Noriman, Zulkepli; Ramani, Mayapan; Zainal Ariffin, Ahmad (Scientific.Net/Trans Tech Publications, 2012-12)Researches and studies on composite solder have been done by many researchers in an effort to develop viable lead-free solders which can replace the conventional lead-based solders as lead is considered as toxic. Solder ... -
Research development of solder materials and its intermetallic compound (IMC) study
Mohd Arif Anuar, Mohd Salleh; Najib Saedi, Ibrahim; Saud, N.; Mohd Mustafa Al Bakri, Abdullah; Nik Noriman, Zulkepli; Ramani, Mayapan; Zainal Ariffin, Ahmad (Scientific.Net/Trans Tech Publications, 2012-12)Nowadays, the formation and the subsequent growth of the intermetallic compounds (IMCs) and the development of new lead-free solder systems is a major issue in soldering. The excessive growth formation of intermetallic ... -
Strength of concrete based cement using recycle ceramic waste as aggregate
Mohd Mustafa Al-Bakri, Abdullah; Norazian, Mohamed Noor; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Arif Anuar, Mohd Salleh; Adila, Abdullah (Trans Tech Publications, 2013)The main focus of this research is to study the strength of concrete with ceramic waste as coarse aggregate. The sources of ceramic waste are obtained from the industrial in Malaysia. Presently, in ceramics industries the ... -
Thermal properties of different recycled acrylonitrile-butadiene rubber glove (NBRr) size and its blend ratios on SBR/NBRr blends
Nik Noriman, Zulkepli, Dr.; Hanafi, Ismail; Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Rosniza, Hamzah (Trans Tech Publications, 2013-09)The effects of SBR/NBRr blends on thermal properties of such thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) were carried out. Results showed that by incorporating the smallest size NBRr ...