Browsing Mohd Mustafa Al Bakri Abdullah, Prof. Dr. by Author "Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr."

Now showing items 1-20 of 77

    • Alkali activated blast-furnace slag cement: The opportunity to solve sustainable issues 

      Aimi Noorliyana, Hashim; Mohd Mustafa Al Bakri, Abdullah; Azira, M.N.; Noor Mariamadzliza, Mohd Nan; Kamrosni, Abdul Razak; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (American-Eurasian Network for Scientific Information, 2013)
      This paper aimed at investigating the possibility of alkali activated blast-furnace slag (BFS) to produce cement powder that could be alternative to ordinary Portland cement. It was found that an alkali activated BFS ...

    • Alteration in the microstructure of fly ash geopolymer upon exposure to elevated temperatures 

      Omar A., Abdulkareem; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2013)
      This paper represents the mechanical and microstructure changes in geopolymeric material synthesized by the alkali activation of locally source fly ash at high temperatures of 400, 600 and 800 °C. The high compressive ...

    • Application of clay - based geopolymer in brick production: A review 

      Muhammad Faheem, Mohd Tahir; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Izzat, Ahmad (Trans Tech Publications, 2013)
      This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...

    • Application of clay - based geopolymer in brick production: A review 

      Muhammad Faheem, Mohd Tahir; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Izzat, Ahmad (Trans Tech Publications Inc., 2013)
      This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...

    • Calcined kaolin geopolymeric powder: Influence of water- to geopolymeric powder ratio 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; cheng, Yong Heah (Trans Tech Publications, 2012-07)
      This paper describes the synthesis of calcined kaolin geopolymeric powder from the alkaline activation of calcined kaolin followed by solidification and pulverizing process. The geopolymeric powder was used by just adding ...

    • Characterization of LUSI mud volcano as geopolymer raw material 

      Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak; Djwantoro, Hardjito, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2012)
      The mud of mud volcano samples were collected from an eruption site named 'LUSI' (Lumpur "mud" -Sidoarjo), East Java, Indonesia for characterization. Analysis showed that, the major constituents of mud are SiO 2 and Al 2O ...

    • Characterization of LUSI mud volcano as geopolymer raw material: A review 

      Rafiza, Abdul Razak; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Djwantoro, Hardjito, Dr. Ir.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      This paper summarizes the current knowledge about the potential of LUSI mud volcano, East Java, Indonesia as a raw material in geopolymer. Previous experimental study shows that the LUSI mud has a good performance when 5% ...

    • Compaction optimization of Sn-Cu-Si3N4via powder metallurgy route for composite solder fabrication 

      Muhamad Hafiz, Zan @ Hazizi; Mohd Arif Anuar, Mohd Salleh; Zainal Arifin, Ahmad, Prof.; Mohd Mustafa Al-Bakri, Abdullah; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      The aim of this study was to optimize the compaction process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si3N4 were carefully ...

    • A comparative study of solder properties of Sn-0.7Cu lead-free solder fabricated via the powder metallurgy and casting methods 

      Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Sandu, Andrei Victor; Norainiza, Saud; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; McDonald, Stuart D.; Nogita, Kazuhiro (Syscom 18 SRL, 2013-07)
      The properties of Sn-0.7Cu solder bulk prepared via the powder metallurgy (PM) method were investigated and compared with solder bulk fabricated through casting. Distinct microstructures were observed in both PM and casting ...

    • Comparative study on thermal, compressive, and wear properties of palm slag brake pad composite with other fillers 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah (Trans Tech Publications, 2011)
      The attractive performance-to-cost ratio associated with the incorporation of waste material in composite formulations used to produce brake pads has stimulated the idea of exploring the possible incorporation of additional ...

    • Comparison of geopolymer fly ash and ordinary Portland cement to the strength of concrete 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya (American Scientific Publishers, 2013-12)
      The aim of this study is to evaluate the effect of various fly ash: aggregate ratios by using fly ash (FA) based geopolymer compared to ordinary Portland cement (OPC) on the compressive strength of concrete. The different ...

    • Comparison of original and sintered LUSI mud from East Java, Indonesia as raw material for making a geopolymer 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Djwantoro, Hardjito, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (American Scientific Publishers, 2013-01)
      This paper presents the characterization of LUSI mud from East Java, Indonesia, as a potential raw material for making a geopolymer. Two types of LUSI mud were analyzed, i.e., original LUSI mud and LUSI mud that had been ...

    • Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature 

      Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Zarina, Yahya; Mohd Arif Anuar, Mohd Salleh; Nurhamidah, Zakaria; Muhammad Faheem, Mohd Tahir (Trans Tech Publications, 2014)
      This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...

    • Compressive strength of fly ash based geopolymer / glass fiber composite via filament winding 

      Che Mohd Ruzaidi, Ghazali, Prof. Madya; Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Anis Nadhirah, Ismail (Trans Tech Publications, 2014)
      In general, filament winding technique is used to fabricate the composite pipes using continuous fiber and matrix resin. In this study, fly ash based geopolymer resin composites reinforced by continuous glass fiber were ...

    • Concrete Ceramic Waste Slab (CCWS) 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Shamsul Baharin, Jamaludin, Prof. Madya (Malaysian Invention & Design Society (MINDS), 2006-05-19)
      Concrete Ceramic Waste Slab (CCWS) was fabricated by mixing the composition of cement and ceramic wastes. The ceramic wastes will act as coarse aggregates in the mixture. This slab can be used as landscape products such ...

    • Correlating composition design and properties of calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Heah, Cheng Yong (American Scientific Publishers, 2013-12)
      This paper discussed the relation between composition design and properties of calcined kaolin geopolymeric powder. Geopolymeric powder was produced by applying the geopolymerization process. The solids-to-liquid ratios ...

    • Correlation between Na 2SiO 3/NaOH ratio and fly ash/alkaline activator ratio to the strength of geopolymer 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Zarina, Yahya; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Geopolymer requires an alkaline activator to induce it pozzolanic property and to accelerate the geopolymerisation process. The geopolymerisation process occurs due to the mixing of fly ash, sodium silicate and sodium ...

    • Corrosion performance of reinforcement bar in geopolymer concrete compare with its performance in ordinary portland cement concrete: A short review 

      Farah Farhana, Zainal; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Azmi, Rahmat, Prof.; Mohd Mustafa Al-Bakri, Abdullah; Norainiza, Saud (Trans Tech Publications, 2013)
      Since decades ago, corrosion is the crucial factors for million dollars loss in construction industry. Corrosion of reinforcement bar in ordinary Portland cement (OPC) concrete is mainly due to chloride and acid attack and ...

    • Design, processing and characterization of fly ash-based geopolymers for lightweight concrete application 

      Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Sandu, Andrei Victor; Mohamed, Bnhussain, Prof. Dr.; Zarina, Yahya; Rafiza, Abdul Razak (Institute for Scientific Information (ISI), 2013-04)
      The mix design of geopolymers plays important role in obtaining desirable compressive strength. Optimum mix design of geopolymers can be applied for application, such as lightweight concrete. In order to determine the ...

    • Development of pilot plant for novel geopolymer brick making machine 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Muhammad Faheem, Mohd Tahir; Shamsul, Baharin Jamaludin, Prof. Dr.; Mohammad Tamizi, Selimin; Muhd Izzat, Ahmad; Alida, Abdullah (American-Eurasian Network for Scientific Information, 2013)
      With rapid growing country's development and rose in construction activity, rising demand of building materials and increased construction wastes have encouraged the development of new building materials. Geopolymer based ...