Now showing items 179-198 of 218

    • Simulation flux distribution and loss calculation on Three Phase Transformer core 1000 KVA using FEM 

      Muhamad Nor Azhar Abdullah (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2008-04)
      This project will show the flux distribution simulation and loss calculation on three phase transformer core 1000kVA using Finite Element Method. Transformer is static device that convert electrical energy from one electric ...
    • Single-Phase induction motor performance with Symmetrical AC supply 

      Muhammad Sukri Ngatiman (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2008-05)
      One source of distortion is represented by non-linear loads. When a pure fundamental voltage with zero source impedance is applied to a non linear load, the resulting current differs in shape from the applied voltage. The ...
    • Single-phase transformer with symmetrical AC output 

      Nur Shahilla Abd Rahim (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2008-05)
      Loads connected to electricity supply systems may be broadly categorized as either linear or non-linear. Non-linear loads are any loads which draw current which is not sinusoidal. The transformer is one of the most common ...
    • Small scale wind power generation 

      Richard, Wong Chung Hie (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-04)
      A small scale wind power generation has been designed and developed in this final year project. The small scale wind power generation been developed which almost of 100:1 ratio than wind turbine by using the same concept ...
    • SMPS flyback converter: laboratory teaching module development recommendations 

      Umar Farouq Yunus (School of Electrical Systems Engineering, 2007-05)
      Flyback Switch Mode Power Supply is normally and widely used in low power application. It is similar to Buck-Boost Derived Converter except Flyback Converter includes a Flyback transformer to provide isolation and act as ...
    • SMPS isolated forward converter: laboratory teaching module development recommendations 

      Mohamad Fairoz Abu Bakar (School of Electrical Systems Engineering, 2007-05)
      The final year project has evaluated an isolated forward converter with a review to future development of a laboratory teaching unit. The report contains a review/study of isolated forward converter operation and historical ...
    • SMS based car security and parking location finder system 

      Norzafirah, Mohamad Ismail (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      Based on the information given by the PDRM, cars which have been stolen can be found fast if the owner reports it by the first hour of the incident. Result shows that 85% chances of catching the thief and obtaining the ...
    • Speed controller for servo motor for industrial purpose 

      Wan Mohd Norhasmi, Wan Hashim (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-04)
      This project is mainly about constructing a DC motor speed controller using microcontroller PIC 16F877A. It is an open loop control system where the output motor speed signal is feedback to the controller by using an ...
    • Standalone door access system (security base) 

      Tan, Hing Kiong (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      These days the security system is an important part for a house or premise to avoid such incident like robbery. A lot of security systems types have been apply to make sure the safety of the premise. One of them is ...
    • Stepper motor control using pic microcontroller based on light intensity 

      Lau, Aik Leng (Universiti Malaysia Perlis (UniMAP)School of Electical Systems Engineering, 2011)
      These days the engineering system is an important part for a construction site and machinery to save the energy such as man-power. A lot of machinery types have been applies to saving times, money and power energy. One of ...
    • Study effect of climate factor on grounding resistivity around UniMAP campus 

      Abdul Hafiz Syafiq, Rozali (Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2011-04)
      Soil resistivity data is the key factor in designing a grounding system for a specific performance objective like a climate factor. All soil conducts electrical current, with some soil having good electrical conductivity ...
    • Study harmonic injections by residential customers 

      Niamah Shafie (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2008-05)
      This paper describes a method of modeling harmonic current injected residential electrical loads. The models were developed using the experimental results from the commercially available equipment commonly use in residential ...
    • Study of a single phase bridge fully controlled rectifier 

      Ling, How Kiat (Universiti Malaysia Perlis (UniMAP)School of Electical Systems Engineering, 2011-05)
      An electric power can be converted from one form to another form by using power electronics devices. The function of power electronics circuits by using semiconductor devices as switch is modifying or controlling a ...
    • Study of doubly fed induction generator using wound rotor induction machine for wind turbine 

      Nur Atteya, Azmi (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      In 1990s, wind power turbines were characterized by a fixed speed operation. Basically, they consisted of the coupling of a wind turbine, a gearbox and an induction machine directly connected to the grid. Wind energy has ...
    • Study of effectiveness fuzzy logic controller for the selected case studies 

      Ganesan, A.Thambiraja (Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2011-05)
      In recent years, the number and variety of applications of fuzzy logic have increased significantly. Fuzzy Logic Controller (FLC) provides an efficient solution to many real-world control problems. The purpose of this final ...
    • Study of effectiveness PID controller for the selected case studies 

      Faranadia, Abdul Haris (Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2011-05)
      PID (Proportional – Integral – Derivative) provides an efficient solution in many real-world control system problems. The main purpose of this final year project is to provide a general overview of the PID controller. This ...
    • Study of lightning back-flashover performance for 275/ 132kV transmission line by using ATP-EMTP 

      Kiu, Ling Zee (Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2011-03)
      Direct lightning strokes to overhead transmission line towers or to shield wires may cause line insulation breakdown, due to the back-flashover phenomenon which the stroke builds up the voltages across the line insulation ...
    • Study of lightning backflashover performance for 132 kV transmission line using ATP-EMTP 

      Nur Farhana, Rashid (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      Lightning has been a major concern to the power system researchers as it may cause damage to the connected electrical equipment especially to the transmission line. One of the event that will cause lightning overvoltage ...
    • Study of microturbine impacts on a distribution system 

      Noor Adilah, Mat Wi (Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2011-06)
      Distributed generation systems have become the new focus of the world and microturbine generation system is one of the systems. The connection of a microturbine generator to a distribution system requires the use of ...
    • A study of neutral currents in three-phase distribution network with non-linear loads 

      Diana Geruka (School of Electrical Systems Engineering, 2007-03)
      Neutral currents are produce by non-linear load. Excessive neutral current can caused a lot of problem to the system. Beside, the third harmonic is the predominant component on the neutral. The total harmonic distortion ...