Browsing School of Materials Engineering (Articles) by Title
Now showing items 96-115 of 560
-
Effect maleic anhydride polypropylene on properties of calcium carbonate filled polypropylene/ethylene propylene diene terpolymer composites
(Trans Tech Publications, 2014)Inorganic filler, calcium carbonate (CaCO₃) was used as filler in the polypropylene (PP)/ ethylene propylene diene terpolymer (EPDM) composites. The composites were compatibilized with Maleic anhydride grafted polypropylene ... -
Effect of alkali concentration on mechanical properties of kaolin geopolymers
(Foundation for Materials Science and Engineering, 2012)Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ... -
Effect of alkali concentration on mechanical properties of kaolin geopolymers
(Procema SA, 2012)Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ... -
Effect of alloying elements on carburizing response of sintered iron containing hosphorus
(Council of Scientific & Industrial ResearchChemistry Section, Z H College of Engineering & Technology, Aligarh Muslim University, 1983)A preliminary investigation of carburizing response of sintered compacts of iron containing phosphorus, copper and either nickel or molybdenum has been made. Nickel or molybdenum content was 2 or 4%, copper content was 2or ... -
Effect of annealing atmosphere on the morphology of copper oxide thin films deposited on TiO₂ substrates prepared by sol-gel process
(Trans Tech Publications, 2014)Copper oxide films were prepared via sol-gel like spin coating starting from methanolic solutions of cupric chloride onto the TiO₂ substrates. Films were obtained by spin coating under room conditions (temperature, 25-30 ... -
Effect of beta tricalcium phosphate (β-TCP) on properties of Mg-Zn composites
(Trans Tech Publications, 2014)In this work, Mg and Zn powder were used to prepare the Mg-Zn/β-TCP composites with different β-TCP composition by using powder metallurgy technique. The composite were mixed using ball mill and compacted at 500 MPa. The ... -
Effect of carbon nanotubes on the compression test and energy absorption of aluminium/polyurethane-carbon nanotubes foam sandwich
(Trans Tech Publications, 2014)The foam was prepared by mixing the polyols, isocyanate and carbonnanotubes (CNTs) at 1000 rpm speed. The different content of the CNTs are varies from 0 3 (0, 0.5, 1.5, 2.0, 2.5, 3.0) percent by weight. The foam sandwich ... -
Effect of catalyst calcination temperature on the synthesis of mwcnts-talc hybrid compound using CVD method
(Trans Tech Publications, 2014)Carbon nanotubes-talc (CNTs-talc) hybrid compound has been successfully synthesized via chemical vapour deposition (CVD) method. A gas mixture of methane/nitrogen (CH4/N2) was used as the carbon source and nickel as the ... -
Effect of cation substitution on electronic band structure of ZnGeAs 2 pnictides: A mBJLDA approach
(Elsevier B.V., 2012-03)The electronic properties of ABAs 2 (A = Zn, Cd; B = Ge, Sn) compounds have been investigated using WIEN2k implementation of full potential linearized augmented plane wave (FPLAPW) method with an aim to study the effect ... -
The effect of chalcogen atom on the structural, elastic, and high-pressure properties of XY compounds (X=La, Ce, Eu, and Y=S, Se, and Te): An ab initio study
(WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim., 2012-01)The B1 (NaCl) and B2 (CsCl) structure of rare-earth monochalcogenides XY (X=La, Ce, Eu, and Y=S, Se, and Te) were investigated with the full-potential linearized-augmented plane wave (FP-LAPW) scheme in the frame of the ... -
Effect of cobalt stearate on outdoor exposure of LLDPE/soy spent powder blends
(Trans Tech Publications, 2013)In this study, the degradability of low linear density polyethylene (LLDPE) and soy spent powder blends under outdoor exposure of Malaysia. Cobalt stearate was used as a pro-oxidant. The degradation of the blends was ... -
Effect of compost medium on oxidative- linear low density polyethylene/soya powder blends
(Trans Tech Publications, 2013)One alternative to enhance the degradability of polyethylene is the addition of prooxidant substances to their matix. The polymer materials are called oxo-biodegradable. Current investigation aimed to assess the abiotic ... -
Effect of curing regimes on metakaolin geopolymer pastes produced from geopolymer powder
(Scientific.Net/Trans Tech Publications, 2012-12)The properties of metakaolin geopolymer paste are affected by the alkali concentration, the initial raw materials, solidification process, and amount of mixing water as well as the curing conditions. This study aimed to ... -
The effect of curing time on the properties of fly ash-based geopolymer bricks
(Scientific.Net/Trans Tech Publications, 2012-12)This paper reports the results of an experimental work conducted to investigate the effect of curing conditions on the properties of fly ash-based geopolymer bricks prepared by using fly ash as base material and combination ... -
Effect of different copper fillers on the electrical resistivity of conductive adhesives
(Springer Science+Business Media, LLC, 2011-05)The effects of different copper fillers with different morphology and particle size have been studied in terms of electrical resistivity and thermal stability on the electrically conductive adhesives. The copper fillers ... -
Effect of different nickel content on the mechanical properties of hydroxyapatite-ni composites from coated powders
(Trans Tech Publications, 2014)HA-Ni composites were fabricated by uniaxial pressing from coated powders, in which HA particles were successfully coated with nickel precursor by the electroless deposition method. The compacted powders sintered at ... -
The effect of different sizes "Batu Reput" (Dolomite) as a filler in SMR L and ENR-50
(Trans Tech Publications, 2013)The effects of different sizes of "Batu Reput" (Dolomite) filler which are smaller size (<63μm) and bigger size (75-150μm) on tensile and morphological properties of "Batu Reput" (Dolomite) filled SMR L and epoxidized ... -
The effect of electrolyte temperature on formation of porous aluminium oxide films in anodising process
(AENSI Publisher All rights reserved, 2013-10)A porous aluminium oxide film formed on aluminium was prepared in a mixed electrolyte of phosphoric acid and acetic acid solution. The morphology, growth and thickness of the film were investigated. The anodising process ... -
Effect of epoxidized natural rubber on thermal properties, fatigue life, and natural weathering test of styrene butadiene rubber/recycled acrylonitrile-butadiene rubber (SBR/NBRr) blends
(John Wiley & Sons, Inc., 2012-01)The utilization of waste rubber powder in polymer matrices provides an attractive strategy for polymer waste disposal. Addition of recycled acrylonitrile-butadiene rubber (NBRr) in rubber compounds gives economic (lowering ... -
Effect of excess mgo mole ratio in a stoichiometric cordierite (2MgO·2Al2O3·5SiO 2) composition on the phase transformation and crystallization behavior of magnesium aluminum silicate phases
(The American Ceramic Society, 2011-05)The effect of excess MgO, 2.0-4.0 mol ratios on the crystallization behavior and purity of Iμ-cordierite was investigated using X-ray diffraction (XRD), differential thermal analyzer, and TGA. Quantitative XRD, the Rietveld ...