Browsing School of Mechatronic Engineering (Articles) by Title

Now showing items 57-76 of 322

    • Computation of stress intensity factor for multiple cracks using singular finite element 

      Ruslizam, Daud; Ahmad Kamal, Ariffin; Shahrum, Abdullah; A. Emran, Ismail; A., Zulkifli (Trans Tech Publications, 2011)
      The simplification of two dimensional approaches in singular finite elements has promoted the method to be used in the formulation of stress intensity factor (SIF) of multiple cracks in finite body. The effect of shielding ...

    • Computational fluid dynamic analysis of the effect of kink conduit in microvascular vein grafting 

      Rahman Yahya, M.N.; Shahriman Abu Bakar, Dr.; Siti Khadijah, Za'aba, Dr.; Sharifah Roohi, Syed Waseem Ahmad; Wan Khairunizam, Wan Ahmad, Dr.; Mohd Nasir, Ayob; Abdul Halim, Ismail (IJENS Publishers, 2012)
      Arterial disease of the upper extremity is an uncommon occurance, most commonly caused by atherosclerosis. In some patients with arterial disease, surgical bypass by vein grafting or vein interposition may be performed. ...

    • Conceptual design of an automated green technology sorting device for mixed household waste 

      Zol Bahri, Razali, Dr. (AENSI Publisher, 2013)
      The purpose of this project was to design a conveyor belt and develop an efficient automated mechanical sorting system for mixed household waste especially paper and plastics that are left uncollected from domestic waste ...

    • Conceptual design of automatic manipulator for metal and non - metal waste management application 

      Zol Bahri, Razali, Dr.; Nuraini, Yatim (IJETAE, 2013-04)
      This project is focuses on a conceptual design of a conveyor system that can be used to differentiate between metallic and non-metallic materials, as well as to perform transferring of the mentioned materials. The project ...

    • Conjugate heat transfer in porous annulus 

      Salman Ahmed, Naveed J; Sarfaraz, Kamangar; Irfan Anjum, Badruddin; Abdullah, A.A.A. Al-Rashed; Ghulam, Abdul Quadir, Prof. Dr.; Khaleed Hussain, M. T.; Yunus Khan, T. M. (Begell House, Inc., 2014)
      The effect of conductivity ratio on temperature at a solid-porous interface is one of the most important aspects in conjugate heat transfer. The present work is undertaken to investigate heat transfer behavior in a porous ...

    • Contrast enhancement for Ziehl-Neelsen tissue slide images using linear stretching and histogram equalization technique 

      Osman, M.K.; Mashor, Mohd. Yusof, Prof. Dr.; Saad, Z.; Jaafar, H. (IEEE, 2009-12-16)
      Ziehl-Neelsen staining method is a common technique used to diagnose tuberculosis infection. Clinical samples such as sputum or tissue are stained using Ziehl- Neelsen procedure and analysed manually by microbiologist for ...

    • Convergence of finite element model for crushing of a conical thin-walled tube 

      Masniezam, Ahmad; Khairul Azwan, Ismail, Dr.; Fauziah, Mat (Elsevier B.V., 2013)
      In this paper, a convergence of finite element model using different types and sizes of mesh modes has been conducted. A thin-walled conical tube was modeled using plane shell element in LS-DYNA software under dynamic axial ...

    • Design and analysis of magnetic flux leakage capsule 

      Maliki, Ibrahim; Zulkarnay, Zakaria; Ali Aiman, Mustapha; Marisah, Norhasan; Mohd Nasir, Ayob; Ibrahim, Balkhis; Ruzairi, Abdul Rahim, Prof. Dr.  (International Frequency Sensor Association (IFSA), 2013-08)
      Magnetic flux leakage (MFL) is among the current in-line non-invasive popular technique applied in pipeline condition control and monitoring. This paper discussed on the design and development of magnetic flux leakage ...

    • Design and development fo a CCD based optical tomography measuring system for particle sizing identification 

      Mariani, Idroas; Ruzairi, Abdul Rahim; Mohd Hafiz, Fazalul Rahiman; M. N., Ibrahim; Green, R. G. (Elsevier Ltd, 2011-07)
      This research investigates the use of charge coupled device (abbreviated as CCD) linear image sensors in an optical tomographic instrumentation system used for sizing particles. Four CCD linear image sensors are configured ...

    • Design and development of a PC-based automated data logging system for measuring temperature 

      Md. Abdullah, Al Mamun; Sundaraj, Kenneth, Assoc. Prof. Dr.; Nasim, Ahmed, Dr.; Matiur J., Rahman; Md. Mijanur, Rahman, Dr.; Nizam Uddin, Ahamed (Asian Research Publishing Network (ARPN), 2013-11)
      Currently, accurate information of the temperature over time is required in medical, scientific, and various industrial applications. The objective of this work was to design and develop a fully automated microcontroller-based ...

    • Design and development of an automated, portable and handheld tablet personal computer-based data acquisition system for monitoring electromyography signals during rehabilitation 

      Nizam Uddin, Ahamed; Sundaraj, Kenneth, Assoc. Prof. Dr.; Poo, Tarn Shi (Institution of Mechanical Engineers (IMechE), 2013-03)
      This article describes the design of a robust, inexpensive, easy-to-use, small, and portable online electromyography acquisition system for monitoring electromyography signals during rehabilitation. This single-channel ...

    • Design and development of sensing system for mines detector robot 

      Ahmad Firdaus, Ahamad Zaidi; Cherng, Yeoh Wei; Handy, Ali Munir; Nur Hidayah, Ahmad Zaidi (Trans Tech Publications, 2014)
      This paper presents the design and development of sensing system for mines detector robot. The objective of this project is to identify the optimum metal detection system and design and develop the sensing system of mines ...

    • Design and development of tracking system for mines detector robot 

      Ahmad Firdaus, Ahamad Zaidi; Ng Shao, Liang; Mohd Hafis, Sulaiman; Mohd Ridzuan, Mohd Jamir; Nur Hidayah, Ahmad Zaidi (Trans Tech Publications, 2014-01)
      This paper presents the design and development of tracking system for the mines detector robot. The scope for the tracking system covers two important tasks: 1. Design of optimum tracking path to cover maximum scanning ...

    • Design and Fabrication of Biodegradable Microneedle Using 3D Rapid Prototyping Printer 

      Nur Hazwani Azyan, Mansor; Marni Azira, Markom; Erdy Sulino, Mohd Muslim Tan; Abdul Hamid, Adom (IOP Publishing, 2019)
      Microneedle is known as transdermal drug delivery (TDD) devices that uses to deliver biological fluid into veins and needle that use to tear skin to collect blood sample. It involves with various parameters and designs. ...

    • Design and kinematic analysis of parallel robot for ankle rehabilitation 

      Muhammad Nazrin Shah, Shahrol Aman; Shafriza Nisha, Basah (Trans Tech Publications, 2013)
      Ankle injury is one of the most common injuries in sports or domestic related accidents. This injury can usually be treated via a number of rehabilitation exercises. However, currently rehabilitation of ankle injury directly ...

    • Design and modelling of ultrasonic tomography for two-component high-acoustic impedance mixture 

      Mohd Hafiz, Fazalul Rahiman; Ruzairi, Abdul Rahim; Zulkarnay, Zakaria (Elsevier B.V., 2008-10)
      This paper describes the design and modelling of ultrasonic tomography for two-component high-acoustic impedance mixture such as liquid/gas and oil/gas flow which commonly found in chemical columns and industrial pipelines. ...

    • Design and Optimize Solid Microneedle using Genetic Algorithm 

      Nurul Fatihah, Zaharin; Marni Azira, Markom; Erdy Sulino, Mohd Muslim Tan; Norhayati, Sabani (IOP Publishing, 2019)
      Microneedle is an example of Transdermal drug delivery (TTD) device. It is known for eliminating pain and inconvenient intravenous injections. This study presents a work on design microneedle and optimize the designs using ...

    • Design consideration for front-end system in ultrasonic tomography 

      Nor Muzakkir, Nor Ayob; Muhammad Jaysuman, Pusppanathan; Ruzairi, Abdul Rahim, Prof. Dr. ; Mohd Hafiz, Fazalul Rahiman, Dr.; Fazlul Rahman, Mohd Yunus; Salinda, Buyamin, Dr.; Intan Maisarah, Abd Rahim; Yusri, Md. Yunos, Dr. (Penerbit UTM Press, 2013)
      The hardware development of the ultrasonic tomography comprises three main parts; the sensor unit, electronic measurement circuits combined with a data acquisition system and finally the display unit. The research done is ...

    • Design of an automated breast cancer masses detection in mammogram using cellular neural network (CNN) algorithm 

      Ling, Sim Choon; Azian Azamimi, Abdulah; Wan Khairunizam, Wan Ahmad, Dr. (American Scientific Publishers, 2014-01)
      An automation system using Cellular Neural Network (CNN) algorithm is proposed to assist the radiologists' task in interpreting the digital mammogram image for detecting the presence of breast masses abnormalities. Mammogram ...

    • Design of an infrared tomography system for detection of bubbles 

      Mohamad Aizat, Hashim; Yusri, Md Yunos; Ruzairi, Abdul Rahim, Prof. Dr.; Herlina, Abdul Rahim, Dr.; Muhammad Saiful Badri, Mansor; Nor Muzakkir, Nor Ayub (Penerbit UTM Press, Universiti Teknologi Malaysia., 2011-08)
      In this study, an optical process tomography with 2 orthogonal projections is being designed to be implemented at a vertical column modelled. The tomography system will be designed from the development of transducer pairs ...