Search
Now showing items 61-70 of 98
Corrosion behavior of copper base alloy In present of straits Of Malacca seawater
(Universiti Malaysia Perlis, 2008-03)
The corrosion behavior of C2801 brass in presence of Straits of Malacca seawater ,
collected from different locations which are Klebang (Malacca), Tanjung Kling (Malacca), Tanjung Emas (Johore), Kuala Perlis (Perlis) and ...
Effect of sintering condition on the properties of Silicate ceramic materials
(Universiti Malaysia Perlis, 2008-04)
This study addresses the effects of fabrication techniques on the development of mechanical properties of sintered clay ceramics. The influence of thermal treatment, soaking time and firing temperature, were investigated ...
Preparation of anti rust paint with waste expanded Polystyrene
(Universiti Malaysia Perlis, 2008-04)
A formula for making paint using waste expanded polystyrene foam (EPS) as a binder in place of alkyd resin in most of the commercial paint was developed. Through the
experiment the formula follows: the base material (EPS) ...
Effect of milling speed on the iron mill scale particle size
(Universiti Malaysia Perlis, 2008-04)
Iron mill scale is a waste of steel processing and physically is flakes in shape.
Milling is a process to reduce iron mill scale into a fine powder. The purpose of this study is to find the best milling speed to produce ...
Effect of Polyethylene glycol to Hydroxyapatite water filter
(Universiti Malaysia Perlis, 2008-04)
The effect of different percentage of binder (PEG) on the microstructure of hydroxyapatite (HA) and its density was examined. In this study, HA samples was prepared by wet mixing methods and samples was prepared using slip ...
Study on different sintering temperature on the composite ferum and cobalt reinforced with silicon carbide
(Universiti Malaysia Perlis, 2008-04)
Particulate-reinforced metal matrix composites (MMCs) have become more attractive to researches because of the problem of anisotropy and high cost of fibre
reinforced MMCs. This study involves the fabrication of MMCs with ...
The production of paper from sugarcane bagasse
(Universiti Malaysia Perlis, 2008-04)
The paper industry worldwide always faced a problem on lack of raw material due to deforestation. The agriculture waste material can be an alternative raw material to produce paper. For this study, sugarcane bagasse was ...
Lattice Imperfections in Intermetallic Ti-Al alloys: an X-Ray Diffraction study of the microstructure by the Rietveld method
(Universiti Malaysia Perlis, 2008-03)
Microstructure in intermetallic Ti-Al alloys with compositions of Al= 45, 50, 55, and 60%
in the homogenized bulk states has been extensively studied using Rietveld whole X-ray profile fitting technique, adopting the ...
Chemical modification of wood fiber on the properties of Polypropylene/Wood fiber composites
(Universiti Malaysia Perlis, 2008-05)
The surface of wood fiber used as reinforcement in polypropylene/wood fiber
composites was modified by acrylic acid. The effect of filler loading and acrylic acid as
compatibilizer on mechanical properties, water absorption ...
Study of erosion corrosion in oil and gas industry
(Universiti Malaysia Perlis, 2008-05)
This project is about study of the erosion corrosion in oil and gas industries based
on the samples from Petronas Gas Processing Plant. The microstructure and hardness analysis was done to the sample ASTM A 105 Carbon ...