Search
Now showing items 21-30 of 37
Properties of CNTs/Calcium Carbonate filled polymer composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)
In the present work, the properties of the synthesized hybrid carbon nanotube-calcium carbonate (CNTs-CaCO3), prepared via chemical vapor deposition and a physically mixed CNTs-CaCO3 filled epoxy composites, at various ...
Optimization of resistance spot welding process parameter on Galvanised steel by using Taguchi Method
(Universiti Malaysia Perlis (UniMAP), 2017-06)
In this experimental study, three resistance spot welding parameters were varied on galvanized steel to determine the optimum value of parameters by using the Taguchi method of analysis. Selected parameters are welding ...
Synthesis and characterization of lead free SnCu & SnCu/SiC composite solder
(Universiti Malaysia Perlis (UniMAP), 2017-06)
The hazardous contain in lead solders have stimulate the current researchers to develop a lead free solders with a same or superior properties. A new approach has been done by introduce a lead free composite solder with ...
A study on corrosion behavior of Mild Steel in Granulated Blast Furnace (GBFS) fly ash geopolymer
(Universiti Malaysia Perlis (UniMAP), 2017-04)
This research presents the corrosion behavior of mild steel embedded in geopolymer paste that produced by the reaction of fly ash and slag with an alkaline activators (NaOH molarity of 12 M, Na2SiO3/NaOH ratio of 2.5). ...
Effect of MAPP coupling agent on the mechanical and morphological properties of the Polypropylene/Aluminum Hydroxide composites
(Universiti Malaysia Perlis (UniMAP), 2017)
To improve the compatibility of aluminum hydroxide (Al(OH)3) and polypropylene (PP), the effect of maleic anhydride-grafted polypropylene (MAPP) on the mechanical and morphological properties of 15 wt.% Al(OH)3/PP composites ...
The effect of temperature on the nitriding of Aluminium
(Universiti Malaysia Perlis (UniMAP), 2017-06)
In this thesis writing, aluminium undergoes nitriding at three different temperatures which is 600°C, 625°C and 650°C. The surface also have been grind and polish with 800, 320 grinder paper and the other variable is rough ...
Preparations of effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr
(Universiti Malaysia Perlis (UniMAP), 2017)
The effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr alloy were investigated at temperature 850°C for 150 hours. The samples of Fe-33Ni-19Cr was given in a square plate shape was undergone heat treatment ...
Synthesis and characterization of biomimetic of Zinc Oxide
(Universiti Malaysia Perlis (UniMAP), 2017-06)
This research explores the preparation and characterization of zinc oxide catalyst prepared by using mint and pine leaves as template respectively and investigation of its catalytic activity for the photoreduction of Fe3+ ...
Anodizing process of Mg alloy using low potential
(Universiti Malaysia Perlis (UniMAP), 2017-04)
This project is focusing on the effect of anodizing on the coating Mg alloys. The Mg alloy was cut with constant length and width. The AZ80 is the type of Mg alloy used. It has high strength but also have high corrosion ...
The Effect of Granulated Blast Furnace Slag (GBFS) Composition on Geopolymer Paste Properties
(Universiti Malaysia Perlis (UniMAP), 2017)
For the research study, I will perform the effect of Granulated Blast Furnace Slag (GBFS) composition on geopolymer paste properties. For my final year project, I will use raw materials of slag and fly ash that was provided ...