Search
Now showing items 1-10 of 37
Effect of mixing parameter on epoxy composites: mechanical and microscopy analysis
(Universiti Malaysia Perlis (UniMAP), 2017-06)
Effect of mixing speed and mixing time on epoxy/nanoclay composites’ mechanical and morphology properties has been studied in this paper. Fixed amount of nanoclay (3phr) was used to mix by 250 rpm and 500 rpm for 1, 2, 2.5 ...
Synthesis and characterization of biomimetic titanium dioxide
(Universiti Malaysia Perlis (UniMAP), 2017-06)
Synthesis of titanium dioxide has become popular nowadays. Biomimetic method has been demonstrated to be very effective ways for synthesizing the titanium dioxide as it low cost and environmental friendly. In this research, ...
Synthesis anodize Al oxide for DNA detection
(Universiti Malaysia Perlis (UniMAP), 2017-04)
This research is discuss on the anodized al oxide for DNA detection by using Taguchi method. One step anodizing is carry out in the mixture electrolyte where phosphoric and oxalic acid are used. Fixed parameter in this ...
Reactions between Iron Oxide and gangue minerals at 1273 K under Ar atmosphere
(Universiti Malaysia Perlis (UniMAP), 2017-06)
CO2 discharged from iron and steelmaking companies is an example of the biggest issues for the protection of global environment and sustainable growth of steelmaking industry. One of the ideas to decrease CO2 emission and ...
Effect of winding angles on the epoxy/kenaf/glass fiber hybrid composite by filament winding process
(Universiti Malaysia Perlis (UniMAP), 2017-06)
The study on the effect of winding angle on the mechanical properties of the kenaf/glass fiber epoxy hybrid composite was successfully conducted. In this paper, epoxy matrix, kenaf and glass fiber were selected as the raw ...
Adsorption of heavy metal ions by using magnetite nanoparticles
(Universiti Malaysia Perlis (UniMAP), 2017-06)
This thesis outlines the study of an adsorption of heavy metal ions by magnetite nanoparticles. Magnetite nanoparticles were synthesized from five different concentration of ferrous sulfate heptahydrate, FeSO4.7H2O as iron ...
Effect of ball to powder ratio and media density on fine grinding and mechanical activation of hematite ores in planetary mill
(Universiti Malaysia Perlis (UniMAP), 2017-06)
Raw hematite ore from Kulim, Kedah was mechanically activated using physical technique of powder ball milling. Operational parameter during fine grinding of the hematite ore are ball to powder ratio (3:1, 5:1, 7:1), milling ...
Preparation and characterization of low linear density polyethylene/plasticized jackfruit seeds starch blends
(Universiti Malaysia Perlis (UniMAP), 2017-05)
The LLDPE/TPS blends were prepared in different blending formulation and additives. The formulation used were divided into 100:0, 95:5, 90:10, 80:20 and 70:30. Preparation of the blends are divided in three stages. The ...
Synthesis and characterization of glass fiber grade specimen using different source of kaolin
(Universiti Malaysia Perlis (UniMAP), 2017-04)
There are many grade of glass that were available in the markets. Different grade of glass can be synthesized by using different sources of raw materials. In this project, glass fiber grade specimen was synthesis using ...
Effects of ultrasonication-assisted homogenization on morphology and properties of thermoplastic starch/cellulose biocomposites
(Universiti Malaysia Perlis (UniMAP), 2017)
The thermoplastic starch/cellulose biocomposites were manufactured as green
biocomposite films. TPS was produced through plasticization which the mixture of
granule starch, water and glycerine went through the heating ...