Search
Now showing items 21-30 of 98
Effect of filler loading of waste tire dust filled Acrylonitrile Butadiene Styrene composites
(Universiti Malaysia Perlis, 2008-04)
Waste tire dust is an organic material which can be used as filler in polymer composites. Effects of filler loading of the waste tire dust filled acrylonitrile butadiene styrene composites were studied. The blend ratios ...
Impedance study on Mg Sacrificial anode for soil corrosion protection
(Universiti Malaysia Perlis, 2008-05)
Sacrificial anode is one of the methods that usually applied in soil corrosion protection especially magnesium (Mg) based anode. This study is focuses on high-potential Mg anode and pure Mg anode. The value of open-circuit ...
Properties of oil palm flour filled Polypropylene composites
(Universiti Malaysia Perlis, 2008-05)
Composites of thermoplastic blend of polypropylene (PP) filled with oil palm flour (OPF) was prepared by Z-Blade Mixer at 180 ºC and rotor speed 50 rpm. In general, increased of oil palm flour loading have increasing Young’s ...
Study on mechanical characterization plastics waste as coarse aggregate (PWCA) for concrete
(Universiti Malaysia Perlis, 2008-05)
Quantities of plastics waste have been increased these recent years due to the boost
in industrialization and the rapid improvement in the standard of living. In Malaysia, most of plastics waste is abandoned and not ...
Properties of pulp fiber filled high density Polyethylene
(Universiti Malaysia Perlis, 2008-04)
In this study, attempt has been made to combine the advantages of fiber and polymer. Composites based on high density polyethylene (HDPE) and pulp fiber was made
through melt blending and compression molding. HDPE/pulp ...
Analysis of Binary Aluminium-Magnesium products with varying composition and optimum flowability, tensile strength and hardness
(Universiti Malaysia Perlis, 2008-04)
Casting is a process that can produce a complex and complicated component. This
final year project is to investigate how far the influence on mechanical properties and
microstructure of varying aluminium-magnesium alloy ...
Aging effect of Sn-Ag-Cu lead free solder
(Universiti Malaysia Perlis, 2008-03)
Many issue related to the performance of lead free solder alloys have arisen. So, it
should be take concern on it and one of the method is by studying the microstructure of
those solder alloys. This because their mechanical ...
Sintering behavior and microstructural characterization of Aluminium copper powder compacts (Al- 4.4 Cu-0.8 Si-0.5 Mg Wt% ) alloy prepared by powder metallurgy
(Universiti Malaysia Perlis, 2008-05)
Powder Metallurgy (P/M) is a near net shape metal forming techniques used to manufacture part to close tolerance. In this research, aluminium copper alloy (Al-4.4%Cu-
0.8% Si-0.5%Mg) is prepared by using P/M method. In ...
A study case of dissimilar welding between mild steel ( Low Carbon Steel ) and stainless steel on hardness vickers and tensile shear test for gas tungsten arc welding ( GTAW )
(Universiti Malaysia Perlis, 2008-04)
This report is about the experimental study on the effects of the dissimilar weld joint design, edge preparation and joint dimension on the weldability of Gas Tungsten Arc Welding ( GTAW ) between mild steel and stainless ...
Agricultural residues as Precursors for activated carbon production (coconut waste)
(Universiti Malaysia Perlis, 2008-05)
Coconut meal and coconut shell were characterized to know the suitability to become the activated carbon precursors. Besides the low cost and decrease the market
waste, this attempt was made to produce an alternative ...