Browsing School of Materials Engineering (FYP) by Subject "Nickel"

Now showing items 1-6 of 6

    • The effect of alloying elements in sintered-recycle steel compaction 

      Mohd Fauzi Jaafar (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      Effects of alloying elements in the sintered-recycle steel compaction were studied using powder metallurgy technique. High-energy milling technique was used to crush and mill the waste steel chip in the form of spiral ...

    • The effect of heat treatment on Fe-Ni/SiC composite 

      Lai Moon Yee (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      The mechanical properties of Fe-Ni/SiC composite on five different soaking time were studied. The Fe-Ni/SiC composite consist of 78% Fe, 20% SiC and 2% Ni. The Fe-Ni/SiC composite was fabricated using powder metallurgy ...

    • The effect of Nickel addition for glass formability of Cu-Ti-Ni amorphous alloy 

      Wan Ahmad Aiman, Wan Salleh (Universiti Malaysia Perlis (UniMAP), 2017-05)
      The Cu50-Ti50 powders were prepared in this project in terms of glass formability and kinetic behaviour with the addition of Ni on different percentages (X= 5%, 10%) by mechanical alloying using planetary ball mill. Before ...

    • Preparations of effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr 

      Siti Aisyah, Che Sakdun (Universiti Malaysia Perlis (UniMAP), 2017)
      The effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr alloy were investigated at temperature 850°C for 150 hours. The samples of Fe-33Ni-19Cr was given in a square plate shape was undergone heat treatment ...

    • The process of electroplating in presence of Nickel Salts 

      Mohd Saiful Khairuddin Azahar (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      Electroplating process has been carried out by utilising the Watt’s Bath without brighteners. Plots of weight change of electrodes versus current density shows that weight loss of anodes and weight of deposits on cathodes ...

    • The study of mechanical and thermoelectric properties of nickel zinc ferrite 

      Noor Amalina, Mat Zin (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)
      This research is conduct to study mechanical and properties of Nickel Zinc Ferrite NiZnOFe₂O₄ as the reinforcement filler to improve the mechanical and thermoelectric properties of polyester to produce thermoelectric ...