Browsing School of Materials Engineering (FYP) by Author "Shamsul Baharin Jamaludin, Prof. Madya Dr. (Advisor)"
Now showing items 1-4 of 4
-
The effect of varied welding currents and cycles on thin sheet mild steel with heat treatment process for resistance spot weld
Mohamed Faisol Mohamed Nor (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of welding current and cycles on the weldability of resistance spot welded low carbon steel with heat treatment process. The heat treatment processes that been ... -
The effect of welding current on mechanical properties of Galvanized steel sheets in resistance spot welding (RSW)
Muhammad Rifki Ismail (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study about the effect of welding current and the cycles on the quality of weld joint on galvanized steel sheets using resistance spot welding. Examinations involve tensile shear and tensile peel strength (T-peel test) ... -
The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
Ahmad Azid Tahar, Ahmad Latiffi (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ... -
A study case of dissimilar welding between mild steel ( Low Carbon Steel ) and stainless steel on hardness vickers and tensile shear test for gas tungsten arc welding ( GTAW )
Ahmad Safwan, Salim (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of the dissimilar weld joint design, edge preparation and joint dimension on the weldability of Gas Tungsten Arc Welding ( GTAW ) between mild steel and stainless ...