Browsing School of Materials Engineering (FYP) by Issue Date
Now showing items 41-60 of 256
-
Speech compression based on LPC method
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Speech processing is currently a key focus for many researchers in the area of Digital Signal Processing. This project is focus on the topic of voice conversion, which involves producing the speech compression. The aim ... -
Fabrication of graded Porous Hydroxyapatite by using coconut fibre
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study was carried out to develop sample hydorxyapatite (HA) cylindrical with have porous in particular part for example his external layers has solid part while on the inside it exist porous. Further it can make as ... -
The process of electroplating in presence of Nickel Salts
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Electroplating process has been carried out by utilising the Watt’s Bath without brighteners. Plots of weight change of electrodes versus current density shows that weight loss of anodes and weight of deposits on cathodes ... -
Agricultural residues as Precursors for activated carbon production (rice husk)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Rice husk because of low cost raw material and it activated form can be used as carbon precursor as a solution to reduce the agricultural waste. An effort was made to produce an activated carbon precursor from the rice ... -
Development and testing of new anode efficiency system for sacrificial anode
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Magnesium based alloy is the most suitable material as sacrificial anodes for corrosion control in underground environment. Performance of control corrosion by anode was depend on efficiency to protect cathode from ... -
The study of flame retardant non-halogen in High Density Polyethylene (HDPE)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The main objective of this study to investigate the effects of non-halogen flame retardant in high density polyethylene (HDPE) and observe their ignition properties. High density polyethylene (HDPE) was prepared with added ... -
Synthesis of Cordierite ceramic using solid state reaction technique
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In this project work, cordierite/ indialite phase was synthesized from three different ratios of powder mixture involved of kaolin, talc and alumina powder. The weight ratios of powder mixtures used in this project were ... -
Sintering atmosphere effect on Al-0.2Mg alloy
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of sintering atmosphere on mechanical properties and microstructure of Al-0.2Mg alloy were investigated. In this study, one type of parameter were used that was; different sintering atmosphere. Al and Mg were ... -
Microstructure of development Al-Mg-Si-Cu powder metallurgy under different addition of Sn
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This project involve 3 sample types that had labeled as Premix A (1%Sn addition), Premix B (1.5%Sn addition) and Premix C (2.0%Sn), each types have five samples. After compaction process measured the weight, thickness, ... -
Effect of Poly(Acrylic acid) on mechanical, morphology properties, X-Ray diffraction and water absorption of Nanoclay filled low density Polyethylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effects of poly(acrylic acid) (PAA) of nanoclay filled low density polyethylene (LDPE) composite on mechanical and characterization were studied using Universal Testing Machine (UTM), X-ray diffraction (XRD), Scanning ... -
The effect of Barium Oxide to the properties of natural Hidroxyapatite
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This project reports the mechanical properties and the microstructure of composite materials made of hydroxyapatite, obtained from natural cow bone, and BaO (1,2 and 5 wt.%), which were sintered at different temperatures ... -
Effect of sintering condition on the properties of Silicate ceramic materials
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study addresses the effects of fabrication techniques on the development of mechanical properties of sintered clay ceramics. The influence of thermal treatment, soaking time and firing temperature, were investigated ... -
Preparation of anti rust paint with waste expanded Polystyrene
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A formula for making paint using waste expanded polystyrene foam (EPS) as a binder in place of alkyd resin in most of the commercial paint was developed. Through the experiment the formula follows: the base material (EPS) ... -
Effect of milling speed on the iron mill scale particle size
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Iron mill scale is a waste of steel processing and physically is flakes in shape. Milling is a process to reduce iron mill scale into a fine powder. The purpose of this study is to find the best milling speed to produce ... -
Effect of Polyethylene glycol to Hydroxyapatite water filter
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of different percentage of binder (PEG) on the microstructure of hydroxyapatite (HA) and its density was examined. In this study, HA samples was prepared by wet mixing methods and samples was prepared using slip ... -
Study on different sintering temperature on the composite ferum and cobalt reinforced with silicon carbide
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Particulate-reinforced metal matrix composites (MMCs) have become more attractive to researches because of the problem of anisotropy and high cost of fibre reinforced MMCs. This study involves the fabrication of MMCs with ... -
The production of paper from sugarcane bagasse
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The paper industry worldwide always faced a problem on lack of raw material due to deforestation. The agriculture waste material can be an alternative raw material to produce paper. For this study, sugarcane bagasse was ... -
The effect of varied welding currents and cycles on thin sheet mild steel with heat treatment process for resistance spot weld
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of welding current and cycles on the weldability of resistance spot welded low carbon steel with heat treatment process. The heat treatment processes that been ... -
Influence of Nitric acid and RE-OA-H3PO4 acid solution on formation of porous anodic aluminium oxide (AAO) thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Anodizing is very suitable process in formation of porous AAO thin film. By controlling the anodizing parameters such as voltage, time, temperature and acid solution during the anodizing process, a layer of AAO thin film ... -
Corrosion properties of Stainless steel
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Chromium content in austenitic stainless steel 304 and 316L can increase the resistance to pitting corrosion through the formation of passive layer on the surface of metal. The corrosion properties of these stainless ...