Browsing School of Manufacturing Engineering (FYP) by Author "School of Manufacturing Engineering"
Now showing items 1-18 of 18
-
The application of value stream mapping in a food-based industry
Siti Khadijah, Zulkefli (Universiti Malaysia Perlis (UniMAP), 2016-06)Unnecessary movement of workers is one of the seven sources of waste. This project was conducted in order to reduce unnecessary movement during the production of 2in1 Green coffee by applying Value Stream Mapping at the ... -
Design and development of extraction and filtering system for Misai Kucing tea in Frutania company
Chong, Ying Xian (Universiti Malaysia Perlis (UniMAP), 2016-06)The purpose of this project is to design and develop an extraction and filtering system for Misai Kucing tea in Frutania Company. Extraction and filtering process is one of the major process for product Misai Kucing tea ... -
Design and development of magnetic flux leakage capsule
Mastura, Norddin (Universiti Malaysia Perlis (UniMAP), 2016-06)This final year project focuses on designing a Magnetic Flux Leakage (MFL) capsule with dual diameter. Innovation of this product is for small diameter of pipeline by using wheel system. This In-line Inspection tool (ILI) ... -
Design and simulation of High Speed Mud Boat (Hull)
Mohd Izzat Hafiz, Mohd Firdaus (Universiti Malaysia Perlis (UniMAP), 2016-05)This project research is to design and simulation the hull of high speed mud boat. Mud boat is type of boat that used for travel on muddy surface for transporting purpose and another’s purposed that widely used at foreign ... -
Effect of hygrothermal environment on composite bonded joint
Intan Ruzaini, Ahmad (Universiti Malaysia Perlis (UniMAP), 2016-05)The objective of this project is to identify the effect of varying hygrothermal environment of composite bonds joint in real working area. Two numbers of physical tests were conducted on carbon and glass fiber prepregs ... -
Ergonomic intervention in fertilizer manufacturing company
Muhamad Aswadi, Azmi (Universiti Malaysia Perlis (UniMAP), 2016-05)The purpose of this study is to solve the ergonomic issues of lifting the fertilizer bag at Fertilizer Manufacturing Company. The study also use some quality tools to define the problem occurred at bagging department ... -
Evaluation the power consumption on cutting parameters during CNC machining using Taguchi Method
Foo, Ming Wei (Universiti Malaysia Perlis (UniMAP), 2016-05)Nowadays, the waste of energy (electrical) consumption in industries is increasing. This waste of energy consumption causes an effect on the environment. So to reduce the environment effects, the power consumption on ... -
Feasibility study on harnessing daylight for short distance curved transmissions for room light
Md Firdaus, Omar (Universiti Malaysia Perlis (UniMAP), 2015-12)The purpose and goal of this final year project is to study the design method of reflective device channel to transfer the daylight illumination into the room.The conventional method is used flat channel can glare the ... -
Green energy production using magnetic forces
Terence, Slyvester Empari (Universiti Malaysia Perlis (UniMAP), 2016-06)Back to past decades, green energy has been introduced regarding the global warming issues related to usage of the non-renewable energy. However, the available renewable energy has limitation and mostly related to location ... -
Investigation of dimensional accuracy and chip formation on peck drilling of mild steel
Mohd Suhail, Mohd Nasri (Universiti Malaysia Perlis (UniMAP), 2016-05)Drilling process is the most important machining process in the manufacturing industries. Almost all mild steel industries and production are based on drilling process. However, the difficulty of the mild steel machining ... -
Investigation of tool wear and chip formation on through hole drilling of mild steel
Nurfatin Syakira Balqis, Mohamed Aminuddin (Universiti Malaysia Perlis (UniMAP), 2016-06)In drilling process at the industry, the problem that always emerges is severe wear occurs at cutting tool and poor surface finish on workpiece. This is because of improper selection of cutting parameters that affect to ... -
Optimization of injection moulding process using Bat Algorithm through simulation study
Mohammad ‘Amir ‘Izzat, Mohd Fadzil (Universiti Malaysia Perlis (UniMAP), 2016-06)This paper describes the simulation work on how to reduce warpage in injection molding. Work simulation consists of three phases mold flow analysis,Response Surface Methodology (RSM) and Bat Algorithm (BA) analysis.For all ... -
Prelimanary development of Microwave Incinerator (Labaratory scale) of liquid organic waste
Izzati, Ismail (Universiti Malaysia Perlis (UniMAP), 2016-06)This project involves a preliminary study to dispose of liquid organic waste. It uses microwaves to dispose of organic waste in liquid form. Previously found that blood,especially liquid waste will be disposed of on-site ... -
Production visual practices assessment in manufacturing industry : a case study in advanced manufacturing industry
Ali Ahmad Salem, Binafif (Universiti Malaysia Perlis (UniMAP), 2016-05)Visual Management is acknowledged in visual working environments, which are organized with information giving, flagging, restricting or ensuring. This paper approaches visual system in lean manufacturing and aims to identify ... -
Productivity rate mathematical model analysis and development of graphical user interface (GUI) for linear arrangement with serial action automated flow line
Wong, Yok Shan (Universiti Malaysia Perlis (UniMAP), 2016-06)This research is to design a PALSAS for productivity rate in a linear arrangement with serial action automated flow line. Productivity is an important criterion for a manufacturing industry, so a method to measure, analysis, ... -
Study and analysis of gas leakage and lubricating system for rotary valve of internal combustion engine
Mohd Sayuti, Ebin (Universiti Malaysia Perlis (UniMAP), 2009-04)This project present new seal design of seal for new rotary valve for internal combustion engine. Seal designed to decrease gas leakage in rotary valve especially at high gases pressure area. In this paper will show ... -
A study on miniature compressed air storage system using double-acting cylinder for portable device
Tham, Chui See (Universiti Malaysia Perlis (UniMAP), 2016-06)Nowadays, there are many research study on the pneumatic device on vehicles. There is some application using compressed air storage system to produce vehicle power. However, there are some troubles facing to produce ... -
Thermal study of cutting tool in turning process
Muhammad Hafiz, Hamidi (Universiti Malaysia Perlis (UniMAP), 2015-12)During the turning process, heat in generated at the edge of cutting tool. This heat is then dissipated through 4 parameter that is cutting tool, work piece, the chipped formed and the cutting fluid. In this experiment, ...