| dc.contributor.author | Mohd Al Amin, Muhamad Nor | |
| dc.contributor.author | Hazizan, Md Akil | |
| dc.contributor.author | Zainal Arifin, Ahmad | |
| dc.date.accessioned | 2010-11-09T04:29:14Z | |
| dc.date.available | 2010-11-09T04:29:14Z | |
| dc.date.issued | 2010-06-09 | |
| dc.identifier.citation | p.227-229 | en_US |
| dc.identifier.isbn | 978-967-5760-02-0 | |
| dc.identifier.uri | http://dspace.unimap.edu.my/123456789/10166 | |
| dc.description | International Conference on X-Rays and Related Techniques in Research and Industry (ICXRI 2010) jointly organized by Universiti Malaysia Perlis (UniMAP) and X-Ray Application Malaysia Society (XAPP), 9th - 10th June 2010 at Aseania Resort Langkawi, Malaysia. | en_US |
| dc.description.abstract | Porous porcelain has been produced using
custom made polymeric sponges with different amount
of linear pore per inch (ppi) 10, 20 and 45 ppi as
template materials. SEM observation revealed the
microstructure of porous porcelain is the replication of
template materials and also confirmed the effect of the
templates ppi to the microstructure of porous porcelain.
The amounts of pores are increased whereas the pore
sizes and the thickness cell wall or struts was increased
as ppi increased. Highly porous porcelain with pores
sizes greater than 100μm was successfully produced
from these templates. This kind of porous structure is
suitable for applications which require bigger pores sizes
such as in catalyst support and porous biomaterials. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Universiti Malaysia Perlis | en_US |
| dc.relation.ispartofseries | Proceedings of the International Conference on X-Rays & Related Techniques in Research & Industry (ICXRI) 2010 | en_US |
| dc.subject | Porous porcelain | en_US |
| dc.subject | Microstructure | en_US |
| dc.subject | Custom template | en_US |
| dc.subject | Polymeric foam replication | en_US |
| dc.title | Effect of the amount of ppi in polymeric foam template to the microstructure of porous porcelain produced via polymeric foam replication method | en_US |
| dc.type | Other | en_US |
| dc.publisher.department | School of Materials Engineering & School of Environmental Engineering | en_US |
