dc.contributor.author | Mohd Faizul Izwan, Ibrahim | |
dc.date.accessioned | 2021-02-23T03:35:24Z | |
dc.date.available | 2021-02-23T03:35:24Z | |
dc.date.issued | 2016 | |
dc.identifier.uri | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/69800 | |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | Turning is one of the most important machining processes used in various industrial applications. Usually the quality of finished part in turning operation is measured in terms of surface finish. In turn, surface quality and tool wear is determined by
machining parameters that is cutting speed, feed rate, and depth of cut. The objective of this study is to investigate the effect of cutting parameters on surface finish and tool wear under MQL nanolubricant during turning operation of Inconel 718. Machining
parameters are considered as input parameters. In turn, the surface finish, and tool wear
is selected as process output measure of performance. A Taguchi approach is employed
to gather the experimental data. Then, based on signal-to-noise (S/N) ratio, the best sets
of cutting parameters have been determined. Using these parameters values, the surface
finish of Inconel 718 may be minimized. Experimental results are provided to illustrate
the effectiveness of the proposed approach. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.subject | MQL Nanolubricant | en_US |
dc.subject | Turning | en_US |
dc.subject | Cutting parameters | en_US |
dc.title | Optimization of cutting parameter performance under MQL Nanolubricant approach during CNC Turning using Taguchi Method | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Ahmad Nabil, Mohd Khalil | |