Browsing Mohd Azaman Md Deros, Dr. by Author "Mohd Azaman, Md Deros"
Now showing items 1-5 of 5
-
Numerical simulation analysis of the in-cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts
Mohd Azaman, Md Deros; Mohd Sapuan, Salit, Prof. Ir Dr.; Shamsuddin, Sulaiman, Prof. Dr.; Edi Syams, Zainudin, Prof. Madya Dr. (Elsevier, 2014-03)In this paper, a numerical analysis of in-cavity residual stress formation in the thin-walled parts of injection-moulded parts is presented by considering the residual stresses produced during the post-filling stage. ... -
Numerical simulation analysis of the in-cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts formed by the injection moulding process
Mohd Azaman, Md Deros; Mohd Sapuan, Salit, Prof. Ir. Dr.; Sulaiman, S.; Edi Syams, Zainudin; Khalina, Abdan, Dr. (Elsevier, 2014-03)In this paper, a numerical analysis of in-cavity residual stress formation in the thin-walled parts of injection-moulded parts is presented by considering the residual stresses produced during the post-filling stage. ... -
Numerical simulation analysis of unfilled and filled reinforced polypropylene on thin-walled parts formed using the injection-moulding process
Mohd Azaman, Md Deros; Mohd Sapuan, Salit; Shamsuddin, Sulaiman; Edi Syams, Zainudin; Khalina, Abdan (Hindawi Publishing Corporation, 2015)Thin-walled moulding technology has attracted increasing attention, particularly in electronic packing applications. The injection moulding of shallow, thin-walled parts with a thickness of 0.7 mm was performed using three ... -
Optimization and numerical simulation analysis for molded thin-walled parts fabricated using wood-filled polypropylene composites via plastic injection molding
Mohd Azaman, Md Deros; Mohd Sapuan, Salit; Shamsuddin, Sulaiman; Edi Syams, Zainudin; Khalina, Abdan (Society of Plastics Engineers, 2014-07)Plastic injection molding is discontinuous and a complicated process involving the interaction of several variables for control the quality of the molded parts. The goal of this research was to investigate the optimal ... -
Optimization of blending parameters and fiber size of kenaf-bast-fiber- reinforced the thermoplastic polyurethane composites by Taguchi method
El-Shekeil, Y. A.; Mohd Sapuan, Salit; Mohd Azaman, Md Deros; Jawaid, M. (Hindawi Publishing Corporation, 2013)“Kenaf-fibers- (KF-)” reinforced “thermoplastic polyurethane (TPU)” composites were prepared by the melt-blending method followed by compression molding. Composite specimens were cut from the sheets that were prepared by ...