| dc.description.abstract | The important aspect in machining process is the quality of milled product surface.
Therefore, the choice of current cutting parameter is very important in order to obtain the
desired surface finish. Thus, measuring and characterizing surface properties represents one of the most important aspects in manufacturing processes. The cutting experiments will be carrying using CNC milling, Spinner (Brand), VC810 (model). The factors that have been chosen in this milling operation including cutting speed [rev/min], feed rate [mm/tooth],
depth of cut [mm] and tool diameter [mm]. The material used in this milling process is
wood. A total of 9 experimental runs will be conducted using Taguchi approach Design of
Experiments to identify the combination of parameter producing the smaller surface
roughness value identify the combination of control factor levels for optimum surface
roughness. From the analysis combination of parameter producing the smaller surface
roughness value identified. Confirmation run with that combination parameter with are
cutting speed = 6000 rpm, tool diameter = 16 mm, feed rate = 0.1 mm/tooth and depth of
cut = 6.0 mm. As a conclusion, this research to obtain the best combination of parameter to
optimize the surface roughness of wood. | en_US |
