Liyana Jamaludin
Browse by
This page provides access to research works by Liyana Jamaludin, currently a Teaching Engineer of Faculty Engineering Technology, Universiti Malaysia Perlis (UniMAP).
Recent Submissions
-
The influence of pre-heated treatment to improve adhesion bond coating strength of fly ash based geopolymer ceramic
(IOP Publishing Ltd, 2018-06)The study focus on effect of pre-heated ceramic surface on the adhesion bond strength between geopolymer coating coating and ceramic substrates. Ceramic substrates was pre-heated at different temperature (400 °C, 600 °C, ... -
Effect of solid to liquid ratio on heavy metal removal by geopolymer-based adsorbent
(IOP Publishing Ltd, 2018-06)Microstructure of three-dimensional aluminosilicate which similar to zeolite cause geopolymer based adsorbent accepted in the treatment of wastewater. This paper presents an investigation on the copper removal from the ... -
Mechanical properties and morphology of palm slag, calcium carbonate and dolomite filler in brake pad composites
(Trans Tech Publications, 2013)The development of asbestos free brake pad composites using different fillers was investigated with a intention to substitute asbestos which is known hazardous and carcinogenic. Mechanical and morphology studies were made ... -
Effect on strength and hardness of clay ceramic substrate after treatment using koalin based geopolymer glaze
(Trans Tech Publications, 2014)Geopolymerization is an alternative for ceramic industry by using clay based material such as kaolin or calcined kaolin geopolymer. Geopolymer paste is initially produced by alkaline activation of calcined kaolin with NaOH ... -
Feasibility study on composition and mechanical properties of marine clay based geopolymer brick
(Trans Tech Publications, 2014)Geopolymer is an inorganic polymer performed in synthesis process of an aluminosilicate material which activated by alkaline activator solution. Marine clay, considered to be a waste substance which have an important ... -
Effect of fly ash/alkaline activator ratio and sodium silicate/NaoH ratio on fly ash geopolymer coating strength
(Trans Tech Publications, 2013)Fly ash geopolymer coating material potential used to protect surface used in exposure conditions. Ratio of fly ash/alkaline activator and Na₂SiO₃/NaOH play important parameter on determining the best flexural strength of ... -
Reviews on the different sources materials to the geopolymer performance
(AENSI Publisher All rights reserved, 2013-10)Geopolymer is manufactured from the aluminosilicate source material in example fly ash, silica fume, kaolin, ground granulate blast slag (GGBS), boiler ash and volcano ash reactivated via alkaline solution. But the different ... -
Nano geopolymer for sustainable concrete using fly ash synthesized by high energy ball milling
(Trans Tech Publications, 2013)This paper presents the development of a nano geopolymer for sustainable concrete using fly ash synthesized by high-energy ball milling. In this paper, we report on our investigation of the effects of grinding on the binder ... -
Strength of concrete with ceramic waste and quarry dust as aggregates
(Trans Tech Publications, 2013)This research focuses on a study of the strength of concrete with ceramic waste as coarse aggregate and quarry dust as fine aggregate. The sources of ceramic waste and quarry dust are obtained from the industrial in Malaysia. ... -
Mechanical properties of polymer composites with sugarcane bagasse filler
(Trans Tech Publications, 2013)Natural fibers reinforced polymer composites have gained more interest because of their biodegradable, light weight, less expensive sources, easy processing, high specific modulus and also environmentally friendly appeal. ... -
Study on refractory materials application using geopolymer processing
(American Scientific Publishers, 2013-01)Geopolymer is cementitious binders that do not require the presence of ordinary Portland cement (OPC). Class F fly ash with geopolymer formulations prepared with an alkaline activator (mixture of Na2SiO3 and NaOH solutions) ... -
Study on fly ash based geopolymer for coating applications
(Trans Tech Publications, 2013)Geopolymer is cementitious binders that do not require the presence of ordinary Portland cement (OPC). Fly ash with geopolymer formulations prepared with mixing alumino-silicate with the alkaline activator solution has ... -
Potential of marine clay as raw material in geopolymer composite
(Scientific.Net/Trans Tech Publications, 2012-12)In this research, marine clays has been studied its potential as a matrix composite materials that tend to be used as alternative materials to concrete. The study shows that marine clays which mixed with appropriate ... -
Feasibility of producing wood fibre-reinforced geopolymer composites (WFRGC)
(Trans Tech Publications, 2013)Wood fibres have long been known as a fibre reinforcement for concrete. Due to its availability and low production cost, this natural fibre has been used in less developed country where conventional construction materials ... -
Fly ash porous material using geopolymerization process for high temperature exposure
(MDPI AG (Basel, Switzerland), 2012-04)This paper presents the results of a study on the effect of temperature on geopolymers manufactured using pozzolanic materials (fly ash). In this paper, we report on our investigation of the performance of porous geopolymers ...