Now showing items 2-21 of 25

    • Characterization of porous aluminum fabricated via sintering- dissolution process (SDP) 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Nik Mohd Fikry, Mohd Rushdi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      Porous metals that have open pores structure with low density and light weight properties are suitable to be used in many engineering applications. In this work, the porous aluminum was fabricated via sintering dissolution ...
    • Compaction optimization of Sn-Cu-Si3N4via powder metallurgy route for composite solder fabrication 

      Muhamad Hafiz, Zan @ Hazizi; Mohd Arif Anuar, Mohd Salleh; Zainal Arifin, Ahmad, Prof.; Mohd Mustafa Al-Bakri, Abdullah; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      The aim of this study was to optimize the compaction process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si3N4 were carefully ...
    • Composite cement reinforced coconut fiber: physical and mechanical properties and fracture behavior 

      Alida, Abdullah; Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (INSInet Publications, 2011)
      This research paper reports the effect of natural fiber content on the physical and mechanical properties as well as fracture behavior of composite cement reinforced with coconut fiber. The mix design was based on 1:1 for ...
    • Compressive strength and crack propagation of cement composites reinforced coconut fibre 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Medwell Journals, 2012)
      This study presents the compressive strength and crack propagation of cement composites reinforced coconut fibre. The development of cement composites in this research were done by substituting coconut fibre to the portion ...
    • Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature 

      Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Zarina, Yahya; Mohd Arif Anuar, Mohd Salleh; Nurhamidah, Zakaria; Muhammad Faheem, Mohd Tahir (Trans Tech Publications, 2014)
      This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...
    • Compressive strength of fly ash based geopolymer / glass fiber composite via filament winding 

      Che Mohd Ruzaidi, Ghazali, Prof. Madya; Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Anis Nadhirah, Ismail (Trans Tech Publications, 2014)
      In general, filament winding technique is used to fabricate the composite pipes using continuous fiber and matrix resin. In this study, fly ash based geopolymer resin composites reinforced by continuous glass fiber were ...
    • Development of coconut fiber with the addition of fly ash for cement panel application in construction 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Natural fibers exist in large quantities and have been classified as waste materials. Coconut fiber is one of them and it is used as addition in fabrication of cement panel. Industrial waste materials such fly ash is ...
    • Development of pilot plant for novel geopolymer brick making machine 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Muhammad Faheem, Mohd Tahir; Shamsul, Baharin Jamaludin, Prof. Dr.; Mohammad Tamizi, Selimin; Muhd Izzat, Ahmad; Alida, Abdullah (American-Eurasian Network for Scientific Information, 2013)
      With rapid growing country's development and rose in construction activity, rising demand of building materials and increased construction wastes have encouraged the development of new building materials. Geopolymer based ...
    • Effect of space holder and compaction pressure on the porosity of sintered copper 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Chong, Xin Yi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      The effect of space-holder content on the porosity of sintered copper that was fabricated by powder metallurgy technique has been investigated. Carbamide was used as space-holder and the content selected was 10 wt. %, 20 ...
    • Effect on strength and hardness of clay ceramic substrate after treatment using koalin based geopolymer glaze 

      Mohd Mustafa Al Bakri, Abdullah; Liyana, Jamaludin; Muhammad Faheem, Mohd Tahir; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Alida, Abdullah (Trans Tech Publications, 2014)
      Geopolymerization is an alternative for ceramic industry by using clay based material such as kaolin or calcined kaolin geopolymer. Geopolymer paste is initially produced by alkaline activation of calcined kaolin with NaOH ...
    • The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites 

      Mazlee, Mohd Noor, Dr.; Key, Tan Pei; Shamsul Baharin,  Jamaludin, Prof. Dr.; Roshasmawi, Abdul Wahab; Nur Izzati, Muhd Nadzri; Alida, Abdullah (Trans Tech Publications, 2013)
      The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ...
    • The effects of various concentrations of NaOH on the inter-particle gelation of a fly ash geopolymer aggregate 

      Alida, Abdullah; Kamarudin, Hussin; Mohd Mustafa Al Bakri, Abdullah; Zarina, Yahya; Sochacki, Wojciech; Rafiza, Abd Razak; Błoch, Katarzyna; Hamzah, Fansuri (MDPI AG, 2021-02)
      Aggregates can be categorized into natural and artificial aggregates. Preserving natural resources is crucial to ensuring the constant supply of natural aggregates. In order to preserve these natural resources, the production ...
    • Inovasi aset baru kecemerlangan pendidikan Melayu: inisiatif Universiti Malaysia Perlis (UniMAP) 

      Kamaruddin, Hussin, Kol, Prof, Dato' Dr,; Mohd Mustafa Al Bakri, Abdullah; Raja Shah Erman, Raja Ariffin; Alida, Abdullah (Universiti Malaysia Perlis (UniMAP), 2012-03-29)
      Kertas pembentangan ini dibuat bagi menerangkan mengenai inovasi aset baru kecemerlangan pendidikan melayu melalui inisiatif yang dilakukan oleh Universiti Malaysia Perlis (UniMAP). Inovasi memainkan peranan penting dalam ...
    • Mechanical properties and fracture behaviour of coconut fibre-based green composites 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Foundation for Materials Science and Engineering “Serban Solacolu”, 2012)
      This paper presents the influence of natural fibre content on the mechanical properties of coconut fibre based-green composites. The mixture ratio of cement:sand by weight was fixed at 1:1. Coconut fibre was used as ...
    • Mechanical properties of ZTA composite using cold isostatic pressing and uniaxial pressing 

      Mohd Mustafa Al-Bakri, Abdullah; Ahmad Fauzi, Mohd Noor, Prof. Dr; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Norazian, Mohamed Noor; Mohd Arif Anuar, Mohd Salleh; Alida, Abdullah (Trans Tech Publications, 2013)
      Alumina-zirconia composite is an engineering material with a great potential to be develop for application as high temperature resistance structural material. In this research, zirconia toughness alumina (ZTA) was produced ...
    • Microstructure studies on the effect of the alkaline activators of fly ash-based geopolymer at elevated heat treatment temperature 

      Mohd Mustafa Al-Bakri, Abdullah; Omar A., Abdulkareem; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Alida, Abdullah (Trans Tech Publications, 2013)
      Fly ash-based geopolymers are new binding materials produced to replace the ordinary Portland cement (OPC) used in concrete. In this research, the effect of alkaline activators on the compressive strength and the microstructure ...
    • The need to intensify research efforts in the alternative to lead shot 

      Baba Gowon; Kahtan S., Mohammed, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Alida, Abdullah (Trans Tech Publications, 2014)
      The problem of lead poisoning resulting from the use of lead shot in hunting waterbirds and shooting sports has led to the partial ban, voluntary restriction and complete ban of lead shot in some countries. The ban resulted ...
    • New processing method of kaolin-based geopolymer brick by using geopolymer brick machine 

      Muhammad Faheem, Mohd Tahir; Mohd Mustafa Al Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Izzat, Ahmad; Alida, Abdullah (Trans Tech Publications, 2014-01)
      With increased activity in construction, deficiency of building materials and construction waste improvements have encouraged the development of new building materials. Conventional construction bricks are usually made ...
    • On the structure of shape memory alloys 

      Cristian Acitei, Dragos; Victor Sandu, Andrei; Mohd Mustafa Al Bakri, Abdullah; Petrica, Vizureanu; Alida, Abdullah (Trans Tech Publications, 2013-12)
      The paper presents the obtaining of shape memory alloys, base copper and a diffractometer and microscopic study on some samples. The study was made on CuZnAl samples, obtained by classic casting and educated. The shape ...
    • Preliminary study on the physical properties of palm ash and PCB waste mixed with phenolic resin. 

      Mohd Radzi, Ali; Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nur Hidayah, Ahmad Zaidi; Alida, Abdullah (Universiti Malaysia PerlisSchool of Materials Engineering & School of Environmental Engineering, 2010-06-09)
      Brake pad is widely used in automotive industry and consists of various materials including asbestos which is harmful to the human and its production exceeds 10 or more ingredients. In this work, preliminary investigation ...