Syed Nuzul Fadzli Syed Adam, Dr.
Browse by
About Dr. Syed Nuzul Fadzli Syed Adam @ Syed Mohamad
Dr. Syed Nuzul Fadzli Syed Adam is currently a Senior Lecturer at Faculty of Mechanical Engineering Technology , Universiti Malaysia Perlis
He was formerly from School of Materials Engineering
ORCID ID: https://orcid.org/0000-0002-2512-5964
Scopus Author ID: 57202735831
Email: Syed Nuzul Fadzli Syed Adam @ Syed Mohamad
Research Interests
Sol-Gel Synthesis
Nanomaterials
Material Characterization
Nanotechnology
Materials Chemistry
Recent Submissions
-
Preparation and properties of porous calcium phosphate
(Universiti Malaysia Perlis, 2008)In this study, preparation of porous calcium phosphate was involved the addition of sodium di-hydrogen phosphate, NaH2PO4 and di-sodium hydrogen phosphate, Na2HPO4 into the raw calcium phosphate powder. The sodium hydrogen ... -
Flexural analysis of polyurethane foam and sandwich composite foam via experimental and finite element Cmethods
(Trans Tech Publications Inc., 2013-09)Polyurethane (PU)/montmorillonite (MMT) composite foam were synthesized with reaction of diisocyanate with polyester polyol by a batch process. In this research, water was used as the blowing agent with TEGOSTAB B8407 and ... -
Preparation and characterizations of palm oil based rigid nanocomposite polyurethane foam
(MASS Malaysia, 2010)The objective of this research is to study and analyze the basic and mechanical properties of polyurethane (PU) foam. PU foams were initially synthesized with reaction of natural oil polyol and isocyanate with ratio of ... -
Sol-gel synthesis and preliminary characterizations of novel silica hybrid xerogels
(Trans Tech Publications, 2013-12)Hybrid silica xerogel mesoporous composite was synthesized by a mild temperature acid catalysed sol-gel route where a natural copolymer; sodium alginate (Na-COOH) together with calcium oxide (CaO) powder were incorporated ... -
Sol-gel synthesis of novel silica hybrid xerogels : Porous studies
(Trans Tech Publications, 2014)Hybrid silica xerogel mesoporous composite was synthesized by a low temperature acid catalysed sol-gel route where a natural copolymer; sodium alginate (Na-COOH) together with calcium oxide (CaO) powder were incorporated ... -
Drop weight impact analysis of laminated polyurethane foam/cloisite 30B clay
(Trans Tech Publications, 2014-01)Laminated polyurethane foam composite was produced by incorporating Cloisite 30B clay as filler and aluminium sheet as the skin. Initially, PU foams were synthesized with reaction of natural oil polyol and isocyanate with ... -
Development of dense Hydroxyapatite from natural and synthetic sources
(University Malaysia Perlis (UniMAP), 2007-06-09) -
Effect of rice husk additions on the final composition of fired kaolinite ceramic
(Universiti Sains Malaysia (USM), 2007-04-11)During production of rice, huge amounts of rice husks are left as abundant waste product. Rice husk is usually disposed off by combustion and this contributes to environmental problem due to the air and water pollution. ... -
The Effect of Porosity on Thermal Conductivity of Silicon Carbide Filled Polyproplyene Composite
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)Silicon carbide filled Polypropylene (PP) composites are fabricated, where the compounding is carried out by using Z-blade mixer with filler loadings of 0wt%, 10wt%, 20wt% and 30wt%. Composite sheets produced from hot press ... -
Flexural Properties and Thermal Conductivity of Aluminium Nitride Filled Polypropylene Composite
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)Aluminium Nitride (AlN) filled Polypropylene (PP) composites are fabricated, where the compounding is carried out by using Z- blade mixer with filler loadings of 0wt%, 10wt%, 20wt% and 30wt%. Composite sheets produced from ...
RSS 1.0