Now showing items 28-47 of 55

    • LED heat dissipation analysis using composite based cylindrical slug 

      Zaliman, Sauli, Dr.; Vairavan, Rajendaran; Retnasamy, Vithyacharan (Trans Tech Publications Inc., 2014-02)
      The optical efficacy and reliability of light emitting diode is extensively influenced by the operating junction temperature of the LED. Therefore, the evaluation of junction temperature is significant. This paper reports ...
    • LED heat dissipation study using different Cu slug size 

      Vairavan, Rajendaran; Retnasamy, Vithyacharan; Zaliman, Sauli, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publisher All rights reserved, 2013-10)
      High power light emitting diodes (LEDs) have significant contribution in illumination industry due exceptional advantages in terms of low power consumption, superior reliability, prolonged life time and high efficiency. ...
    • Low density fibrous material surface light reflectance analysis 

      Ong, Tee Say; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publisher All rights reserved, 2013-10)
      The light based surface finishing of most product measurement is an important feature in the industries. In this paper, a lab fabricated tester for investigation on the quality of low density paper which was represent by ...
    • Main effects study on plasma etched aluminium metallization 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Aaron, Koay Terr Yeow (Trans Tech Publications, 2014-01)
      Main effects contributing to the quality of surface roughness on an etched aluminium metallization wafer using Reactive Ion Etching (RIE) was studied. A total of three controllable process variables, with eight sets of ...
    • Microfluidic channel depth determination with Tywman-Green interferometer 

      Wan Mokhdzani, Wan Nor Haimi; Zaliman, Sauli, Prof. Madya Dr.; Retnasamy, Vithyacharan; Taniselass, S.; N., Ramli; M. H. A. Aziz; R., Hatta (Springer-Verlag London., 2013-07)
      A microfluidic channel is fabricated on a silica wafer using reactive ion etching (RIE). The depth of the microfluidic channel has been measured using a surface profilometer and a Twyman-Green interferometer (TGI) setup. ...
    • Natural heat convection analysis on cylindrical Al slug of LED 

      Vairavan, Rajendaran; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah; Nazuhusna, Khalid (Trans Tech Publications, 2014-01)
      This paper presents the characterization of a single chip high power LED package through simulation. Ansys version 11 was used for the simulation. The characterization of the LED package with aluminum cylindrical heat slug ...
    • Nuclear matter and surface clustering 

      Qamar Nasir, Usmani, Prof. Dr.; Nooraihan, Abdullah; Khairul Anwar, Mohamad Khazali; Zaliman, Sauli, Dr. (IOP Publishing Ltd, 2013)
      We demonstrate that the binding energy per nucleon of symmetric nuclear matter (SNM) (with Coulomb interaction switched off and N Z) in the limit of zero density approaches to its value, uv, at the saturation density, where ...
    • Numerical analysis of velocity profile in a FFS microchannel 

      Nor Shakirina, Nadzri; Retnasamy, Vithyacharan; Zaliman, Sauli, Dr.; Tan, Hsio Mei; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publisher All rights reserved, 2013-10)
      Manipulation of the fluid flow behavior in microfluidic with precision technique is crucial to satisfy the needs of miniaturized systems. Velocity measurement is one of the physical phenomena plays significant role to ...
    • Operating temperature analysis of LED with cylindrical Cu slug 

      Vairavan, Rajendaran; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan (Trans Tech Publications, 2014-01)
      High power light emitting diodes is the new era of lighting due to momentous supremacy in terms of lighting efficacy over traditional lighting systems. The reliability of LED is dependent on its junction temperature. This ...
    • Physical characterization of BST with different (x') ratios 

      Nurhafizah, Ramli; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; They, Yee Chin; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah (Trans Tech Publications, 2014)
      Nowdays Barium strontium titanate (BST) can be applied into many fields of engineering. Its properties attracted more researchers to research and apply it into many fields of study. In this work, sol-gel method of preparing ...
    • Polymer core BGA stress analysis at minimal vertical loading 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Steven, Taniselass; Norazeani, Abdul Rahman; Muhamad Hafiz, Ab Aziz (Trans Tech Publications, 2012-12)
      Ball grid array is an interconnection method widely used in the electronic packaging industry. The reliability of the solder ball is being improved by introducing new materials for the solder ball. In this study, the stress ...
    • Relationship between controllable process parameters on bump height in ENIG 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Fairul Afzal, Ahmad Fuad; Ehkan, Phaklen, Dr.; Muhamad Hafiz,  Ab Aziz (Trans Tech Publications, 2013)
      This paper reports the factors that affect the bump height in electroless nickel immersion gold (ENIG) and their interrelation between each other. Bump height is a critical issue that needs to be investigated because a ...
    • Shear ram height investigation for gold wire bond shear test 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Ahmad Husni, Mohd Shapri; Taniselass, Steven; Ong, T.S. (Trans Tech Publications, 2012-12)
      This paper presents the simulation of gold wire bond shear test. The stress and strain response of the gold ball bond during wire bond shear was examined. The simulation was done using a A 3D non-linear finite element ...
    • Shear ram speed characterization for copper wire bond shear test 

      Zaliman, Sauli, Prof. Madya Dr.; Retnasamy, Vithyacharan; Ahmad Husni, Mohd Shapri; Norazeani, Abdul Rahman; Wan Mokhzani, Wan Norhaimi; Taniselass, Steven; Abdul Halis, Abdul Aziz (Trans Tech Publications, Switzerland., 2012)
      This paper presents the evaluation of the stress and strain response of the copper ball bond during wire bond shear test using finite element analysis. A 3D non-linear finite element model was developed for the simulation. ...
    • Shear speed analysis on Sn-3.9Ag-0.6Cu Solder 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Fairul Afzal, Ahmad Fuad; Ehkan, Phaklen, Dr.; Ong, Tee Say; Vairavan, Rajendaran (Trans Tech Publications (TTP), 2013)
      Ball Grid Array (BGA) is a type of semiconductor interconnection used in Integrated Circuit (IC) which is being scaled down to micro and nano size. The reliability of BGA in IC becomes a concern as the size of IC reduces. ...
    • Shear strain analysis in FSS microchannel 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Nor Shakirina, Nadzri; Tan, Hsio Mei; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publications, 2013-10)
      Microfluidics has motivated the development of various fields in biological engineering due to its advantages. The favorable benefits of using microfluidicsare being easy to fabricate, requirement of minimal fluid volumes, ...
    • Silica microchannel fabrication using fluorine based rie with alas a mask 

      Wan Mokhzani, Wan Norhaimi; Retnasamy, Vithyacharan; Zaliman, Sauli, Assoc. Prof. Dr.; Taniselass, Steven; Ahmad Husni, Mohd Shapri; Norazeani, Abdul Rahman; Abdul Halis, Abdul Aziz (INSInet Publications, 2012-09)
      The silica microchannel fabrication process has been executed with Al thin films as the sacrificial layer during Reactive Ion Etching Process (RIE). CF4/Ar and SF6/Ar plasmas has been used to investigate etch rate of Al ...
    • Surface roughness analysis on reactive ion etched aluminium deposited wafer 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Aaron, Koay Terr Yeow (Trans Tech Publications, 2014)
      This paper investigates the factors that affect the surface roughness on an Aluminium deposited wafer after reactive ion etching (RIE) using a combination of Tetrafluoromethane (CF₄) and Oxygen (O₂) gaseous. A total of ...
    • Surface roughness and wettability correlation on etched platinum using reactive ion ecthing 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Aaron, Koay Terr Yeow; Goh, Siew Chui; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah (Trans Tech Publications, 2014-01)
      As the world of semiconductor is moving towards smaller and high-end applications, the quality of the bonding adhesion for wire bonding is very critical. Although aluminium has been the metallization of choice in integrated ...
    • Surface roughness scrutinizaton with RIE CF₄+Argon gaseous on platinum deposited wafer 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Aaron, Koay Terr Yeow; Siew Chui, Goh; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah (Trans Tech Publications, 2014)
      Aluminium metallization has a disadvantage when it comes to high-end applications as it cannot withstand the high temperature and pressure. This paper studies the factors that affect the surface roughness on a Platinum ...