Now showing items 21-40 of 55

    • Height measurement based on fringe projection 

      Retnasamy, Vithyacharan; Zaliman, Sauli, Dr.; Nor Shakirina, Nadzri; Veriven, Christopher John (Trans Tech Publications, 2014)
      A three-dimensional surface measurement using fringe projection technique has received attention among the researches for the last few decades.However choosing the best method is the challenge because one needs to consider ...
    • High power LED heat dissipation analysis via copper diamond slug 

      Vairavan, Rajendaran; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publisher All rights reserved, 2013-10)
      The emergence of high power light emitting diode as a novel electronic based light source is due to its vast advantage in terms of optical efficacy, low power consumption and enhanced life time. However, the performances ...
    • Interaction relationship analysis of surface roughness on aluminium etched wafer using RIE 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Aaron, Koay Terr Yeow; Wei Wei, Ng (Trans Tech Publications, 2014)
      This paper presents the interaction relationships between Tetrafluoromethane (CF₄) gas, Oxygen (O₂) gas, and RF power in response to the surface roughness of an Aluminium deposited wafer after being etched using Reactive ...
    • Interrogation of surface roughness and bond force effect 

      Zaliman, Sauli, Dr. (AENSI Publisher All rights reserved, 2013-10)
      In the macro world surface roughness is a feature undoubtedly not to be ignored. In the current trend towards the nano-scale feature in the devices related to the semiconductor and other various niche, surface roughness ...
    • Investigation of dielectric characteristics and tunability of Ba0.8Sr0.2TiO3 

      Nurhafizah, Ramli; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; They, Yee Chin; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publisher All rights reserved, 2013-10)
      It's been years ferroelectric materials has become a popular fields for research. Many methods were used for the barium strontium titanate (BST) preparation like sol-gel method, radio frequency (RF) magnetron sputtering, ...
    • Investigation of surface roughness on platinum deposited wafer after reactive ion etching using SF₆+Argon gaseous 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Aaron, Koay Terr Yeow; Siew Chui, Goh; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah (Trans Tech Publications, 2014)
      This paper investigates the factors that affect the surface roughness on a Platinum deposited wafer after reactive ion etching (RIE) using a combination of SF₆ and Argon gaseous. A total of three controllable process ...
    • Ionic contaminations level and cleaning flip chip BGA package via a new cleaning solvent technology 

      Yap, Boon Kar, Dr.; Noor Azrina, Talik; Zaliman, Sauli, Dr.; Foong, Chee Seng; Tan, Chou Yong, Dr.; Retnasamy, Vithyacharan (Emerald Group Publishing Limited, 2013)
      Purpose - This paper aims to discuss the effects of ionic contaminations on the die surface of high lead flip chip ball grid array (FCBGA) package. Ionic contaminations from the flux residue, formed during the die attachment ...
    • LED heat dissipation analysis using composite based cylindrical slug 

      Zaliman, Sauli, Dr.; Vairavan, Rajendaran; Retnasamy, Vithyacharan (Trans Tech Publications Inc., 2014-02)
      The optical efficacy and reliability of light emitting diode is extensively influenced by the operating junction temperature of the LED. Therefore, the evaluation of junction temperature is significant. This paper reports ...
    • LED heat dissipation study using different Cu slug size 

      Vairavan, Rajendaran; Retnasamy, Vithyacharan; Zaliman, Sauli, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publisher All rights reserved, 2013-10)
      High power light emitting diodes (LEDs) have significant contribution in illumination industry due exceptional advantages in terms of low power consumption, superior reliability, prolonged life time and high efficiency. ...
    • Low density fibrous material surface light reflectance analysis 

      Ong, Tee Say; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publisher All rights reserved, 2013-10)
      The light based surface finishing of most product measurement is an important feature in the industries. In this paper, a lab fabricated tester for investigation on the quality of low density paper which was represent by ...
    • Main effects study on plasma etched aluminium metallization 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Aaron, Koay Terr Yeow (Trans Tech Publications, 2014-01)
      Main effects contributing to the quality of surface roughness on an etched aluminium metallization wafer using Reactive Ion Etching (RIE) was studied. A total of three controllable process variables, with eight sets of ...
    • Microfluidic channel depth determination with Tywman-Green interferometer 

      Wan Mokhdzani, Wan Nor Haimi; Zaliman, Sauli, Prof. Madya Dr.; Retnasamy, Vithyacharan; Taniselass, S.; N., Ramli; M. H. A. Aziz; R., Hatta (Springer-Verlag London., 2013-07)
      A microfluidic channel is fabricated on a silica wafer using reactive ion etching (RIE). The depth of the microfluidic channel has been measured using a surface profilometer and a Twyman-Green interferometer (TGI) setup. ...
    • Natural heat convection analysis on cylindrical Al slug of LED 

      Vairavan, Rajendaran; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah; Nazuhusna, Khalid (Trans Tech Publications, 2014-01)
      This paper presents the characterization of a single chip high power LED package through simulation. Ansys version 11 was used for the simulation. The characterization of the LED package with aluminum cylindrical heat slug ...
    • Nuclear matter and surface clustering 

      Qamar Nasir, Usmani, Prof. Dr.; Nooraihan, Abdullah; Khairul Anwar, Mohamad Khazali; Zaliman, Sauli, Dr. (IOP Publishing Ltd, 2013)
      We demonstrate that the binding energy per nucleon of symmetric nuclear matter (SNM) (with Coulomb interaction switched off and N Z) in the limit of zero density approaches to its value, uv, at the saturation density, where ...
    • Numerical analysis of velocity profile in a FFS microchannel 

      Nor Shakirina, Nadzri; Retnasamy, Vithyacharan; Zaliman, Sauli, Dr.; Tan, Hsio Mei; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publisher All rights reserved, 2013-10)
      Manipulation of the fluid flow behavior in microfluidic with precision technique is crucial to satisfy the needs of miniaturized systems. Velocity measurement is one of the physical phenomena plays significant role to ...
    • Operating temperature analysis of LED with cylindrical Cu slug 

      Vairavan, Rajendaran; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan (Trans Tech Publications, 2014-01)
      High power light emitting diodes is the new era of lighting due to momentous supremacy in terms of lighting efficacy over traditional lighting systems. The reliability of LED is dependent on its junction temperature. This ...
    • Physical characterization of BST with different (x') ratios 

      Nurhafizah, Ramli; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; They, Yee Chin; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah (Trans Tech Publications, 2014)
      Nowdays Barium strontium titanate (BST) can be applied into many fields of engineering. Its properties attracted more researchers to research and apply it into many fields of study. In this work, sol-gel method of preparing ...
    • Polymer core BGA stress analysis at minimal vertical loading 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Steven, Taniselass; Norazeani, Abdul Rahman; Muhamad Hafiz, Ab Aziz (Trans Tech Publications, 2012-12)
      Ball grid array is an interconnection method widely used in the electronic packaging industry. The reliability of the solder ball is being improved by introducing new materials for the solder ball. In this study, the stress ...
    • Relationship between controllable process parameters on bump height in ENIG 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Fairul Afzal, Ahmad Fuad; Ehkan, Phaklen, Dr.; Muhamad Hafiz,  Ab Aziz (Trans Tech Publications, 2013)
      This paper reports the factors that affect the bump height in electroless nickel immersion gold (ENIG) and their interrelation between each other. Bump height is a critical issue that needs to be investigated because a ...
    • Shear ram height investigation for gold wire bond shear test 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Ahmad Husni, Mohd Shapri; Taniselass, Steven; Ong, T.S. (Trans Tech Publications, 2012-12)
      This paper presents the simulation of gold wire bond shear test. The stress and strain response of the gold ball bond during wire bond shear was examined. The simulation was done using a A 3D non-linear finite element ...