Browsing Khairul Nizar Ismail, Associate Professor Dr. by Author "Khairul Nizar, Ismail"

Now showing items 1-18 of 18

    • Chemical and physical characterization of boiler ash from palm oil industry waste for geopolymer composite 

      Zarina, Yahya; Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Andrei Victor, Sandu; Petricǎ, Vizureanu; Rafiza, Abdul Razak (Syscom 18 SRL/ SC BIBLIOTECA CHIMIEI SA, 2013-12)
      The characterizations of boiler ash waste from waste of palm oil industry were performed. The boiler ash was obtained from the boiler in the palm oil processing factory. The chemical and physical characterization has been ...

    • Chemical reactions in the geopolymerisation process using fly ash-based geopolymer: A review 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussain; Khairul Nizar, Ismail; Rafiza, Abdul Razak; Mohd Izzat, Ahmad (American-Eurasian Network for Scientific Information (AENSI Publisher), 2011-07)
      The development of our world, demanding the power supply which is produced by combustion of coal. Unfortunately, the million of tons of fly ash and related-products have been generated. To overcome these problems, fly ash ...

    • Comparative characterization of Clinker’s microstructure at different temperature zone during cement production 

      Mohd Sobri, Idris; Khairul Nizar, Ismail; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin (Science Publications, 2007)
      Temperature is an important parameter for transformation of minerals in clinker during cement productions. It influences the formation of alite from belite during calcinations and clinkering processes. The result of ...

    • Comparative Characterization of Clinker’s Microstructure at Different Temperature Zone during Cement Production 

      Mohd Sobri, Idris; Khairul Nizar, Ismail; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin (Science Publications, 2007)
      Temperature is an important parameter for transformation of minerals in clinker during cement productions. It influences the formation of alite from belite during calcinations and clinkering processes. The result of ...

    • Comparative Study of Clinker’s Transformation at Different Temperature Zone During Cement Production 

      Mohd Sobri, Idris; Khairul Nizar, Ismail; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin (Science Publications, 2007)
      Chemical composition analysis using x-ray fluorescence is one of the important quality analysis for examining of cement and widely used in cement industries for a long time as a tool to estimate phase composition. X-ray ...

    • Effect of curing profile on kaolin-based geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin; Mohd Mustafa, Al Bakri Abdullah; Mohammed Amjad, Hussain; Luqman, Musa; Khairul Nizar, Ismail; Che Mohd Ruzaidi, Ghazali; Liew Yun, Ming (Elsevier B.V., 2011)
      Depending on the processing conditions, geopolymers can exhibit a wide variety of properties and characteristics. Curing profile serves as a crucial parameter in synthesis of geopolymers. In this paper, the influence of ...

    • Effect of curing system on properties of fly ash-based geopolymer bricks 

      Wan Mastura, Wan Ibrahim; Kamarudin, Hussin; Khairul Nizar, Ismail; Mohd Mustafa, Al Bakri Abdullah; Mohammed Amjad, Hussain (Praise Worthy Prize, 2013)
      The influence of curing time and curing temperature on properties of fly ash-based geopolymer bricks has been studied. The compressive strength and water absorption of geopolymer bricks were investigated which are produced ...

    • The effect of curing temperature on physical and chemical properties of geopolymers 

      Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussain; Khairul Nizar, Ismail; Zarina, Yahya; Rafiza, Abdul Razak (Elsevier BV, 2011)
      Fly ash-based geopolymers required heat to increase the geopolymerization process in order to obtain higher compressive strength. As such, geopolymer samples were prepared using different curing temperatures (room temperature, ...

    • Effect of NaOH concentration on microstructure of boiler ash based geopolymer 

      Zarina, Yahya; Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Abdul Rahim, Abdul Razak (Trans Tech Publications Ltd., 2015)
      Boiler ash is one of the waste material from palm oil processing industry and it was widely available. The role of alkaline activator in geopolymer is important for its mechanical properties. NaOH and sodium silicate ...

    • Effect of Solids-To-Liquids, Na2SiO3-To-NaOH and Curing Temperature on the Palm Oil Boiler Ash (Si + Ca) Geopolymerisation System 

      Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Rafiza, Abd Razak; Sandu, Andrei Victor (MDPI AG, 2015)
      This paper investigates the effect of the solids-to-liquids (S/L) and Na2SiO3/NaOH ratios on the production of palm oil boiler ash (POBA) based geopolymer. Sodium silicate and sodium hydroxide (NaOH) solution were used as ...

    • Effects of calcination temperature and zinc-source concentration on chemical-solution synthesized ZnO nanorods 

      Kuan Y., Cheong; Hartini, Hussin; Khairul Nizar, Ismail (Electrochemical Society, 2006)
      In this paper, ZnO nanoparticles, in particular nanorods, were prepared by a time-saving and a cost effective chemical-solution process. Zinc acetate dehydrates, 2-propanol and diethanolamine were used as the source to ...

    • The fabrication of artificial marble from dolomite (Batu Reput) 

      Kamarudin, Hussin; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Mohd Sobri, Idris; Mohd Nazry, Salleh; Mohabattul Zaman, S NS Bukhari; Khairul Nizar, Ismail (The Mineral, Metals & Materials Society (TMS), 2006-01)
      Perlis is one of the major producers of "Batu Reput" in Malaysia and majority of the deposits contain of high-purity calcium and magnesium carbonate. The composition of Batu Reput is similar with the ordinary dolomite. ...

    • Influence of solids-to-liquid and activator ratios on calcined kaolin cement powder 

      Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Luqman, Musa, Dr.; Mohd Mustafa Al Bakri, Abdullah; Heah, Cheng Yong; Khairul Nizar, Ismail; Mohammed, Binhussain; Liew, YunMing (Elsevier BV, 2011)
      This paper summarizes the effect of activator ratio on the processing of cement powder. Geopolymer slurry was produced via alkaline activation of calcined kaolin. Once the geopolymer slurry solidified, it was crushed and ...

    • Optimization of NaOH Molarity, LUSI Mud/Alkaline Activator, and Na2SiO3/NaOH Ratio to Produce Lightweight Aggregate-Based Geopolymer 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Djwantoro, Hardjito; Zarina, Yahya (MDPI AG, 2015-05-21)
      This paper presents the mechanical function and characterization of an artificial lightweight geopolymer aggregate (ALGA) using LUSI (Sidoarjo mud) and alkaline activator as source materials. LUSI stands for LU-Lumpur and ...

    • Properties of hooked steel fibers reinforced alkali activated material concrete 

      Meor Ahmad Faris, Meor Ahmad Tajudin; Mohd Mustafa Al Bakri, Abdullah; Khairul Nizar, Ismail; Ratnasamy, Muniandy; Aiman, Mahmad Nor; Ramadhansyah, Putra Jaya; Warid Wazien, Ahmad Zailani‬ (EDP Sciences, 2016)
      In this study, alkali activated material was produced by using Class F fly ash from Manjung power station, Lumut, Perak, Malaysia. Fly ash then was activated by alkaline activator which is consisting of sodium silicate ...

    • The relationship of NaOH molarity, Na2SiO3/NaOH ratio, fly ash/alkaline activator ratio, and curing temperature to the strength of fly ash-based geopolymer 

      Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussin; Khairul Nizar, Ismail; Rafiza, Abdul Razak; Zarina, Yahya (Trans Tech Publications, 2011)
      Geopolymer, produced by the reaction of fly ash with an alkaline activator (mixture of Na2SiO3 and NaOH solutions), is an alternative to the use of ordinary Portland cement (OPC) in the construction industry. However, there ...

    • Strength and microstructural properties of mechanically-activated kaolin geopolymers 

      Cheng, Yong Heah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohammed, Bnhussain; Luqman, Musa; Khairul Nizar, Ismail; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liew, Yun Ming (Trans Tech Publications, 2012-12)
      Kaolin geopolymers exhibit low strength properties due to its plate-like nature which contribute to smaller surface area for geopolymerization reactions. Layered kaolin structure only allows very little, if any, substitution ...

    • Strength, density and water absoprtion of Palm oil boiler ash (POBA) geopolymer brick/IBS brick 

      Zarina, Yahya; Kamarudin, Hussin; Mohd Mustafa Al Bakri, Abdullah; Khairul Nizar, Ismail; Rafiza, Abd Razak (Trans Tech Publications Ltd., 2016-01)
      Geopolymer or alkali-activated binder is produced by synthesizing aluminosilicate source materials with an alkaline activator solution. This study has been conducted to produce palm oil boiler ash (POBA) geopolymer brick/IBS ...