Browsing Khairul Nizar Ismail, Associate Professor Dr. by Subject "Geopolymer"

Now showing items 1-20 of 30

    • Characterization of LUSI mud volcano as geopolymer raw material 

      Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak; Djwantoro, Hardjito, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2012)
      The mud of mud volcano samples were collected from an eruption site named 'LUSI' (Lumpur "mud" -Sidoarjo), East Java, Indonesia for characterization. Analysis showed that, the major constituents of mud are SiO 2 and Al 2O ...

    • Chemical and physical characterization of boiler ash from palm oil industry waste for geopolymer composite 

      Zarina, Yahya; Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Andrei Victor, Sandu; Petricǎ, Vizureanu; Rafiza, Abdul Razak (Syscom 18 SRL/ SC BIBLIOTECA CHIMIEI SA, 2013-12)
      The characterizations of boiler ash waste from waste of palm oil industry were performed. The boiler ash was obtained from the boiler in the palm oil processing factory. The chemical and physical characterization has been ...

    • Chemical reactions in the geopolymerisation process using fly ash-based geopolymer: A review 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussain; Khairul Nizar, Ismail; Rafiza, Abdul Razak; Mohd Izzat, Ahmad (American-Eurasian Network for Scientific Information (AENSI Publisher), 2011-07)
      The development of our world, demanding the power supply which is produced by combustion of coal. Unfortunately, the million of tons of fly ash and related-products have been generated. To overcome these problems, fly ash ...

    • Comparison of original and sintered LUSI mud from East Java, Indonesia as raw material for making a geopolymer 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Djwantoro, Hardjito, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (American Scientific Publishers, 2013-01)
      This paper presents the characterization of LUSI mud from East Java, Indonesia, as a potential raw material for making a geopolymer. Two types of LUSI mud were analyzed, i.e., original LUSI mud and LUSI mud that had been ...

    • Effect of curing profile on kaolin-based geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin; Mohd Mustafa, Al Bakri Abdullah; Mohammed Amjad, Hussain; Luqman, Musa; Khairul Nizar, Ismail; Che Mohd Ruzaidi, Ghazali; Liew Yun, Ming (Elsevier B.V., 2011)
      Depending on the processing conditions, geopolymers can exhibit a wide variety of properties and characteristics. Curing profile serves as a crucial parameter in synthesis of geopolymers. In this paper, the influence of ...

    • Effect of curing regimes on metakaolin geopolymer pastes produced from geopolymer powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohammed, Bnhussain; Luqman, Musa; Khairul Nizar, Ismail, Prof. Madya Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Cheng, Yong Heah (Scientific.Net/Trans Tech Publications, 2012-12)
      The properties of metakaolin geopolymer paste are affected by the alkali concentration, the initial raw materials, solidification process, and amount of mixing water as well as the curing conditions. This study aimed to ...

    • Effect of curing system on properties of fly ash-based geopolymer bricks 

      Wan Mastura, Wan Ibrahim; Kamarudin, Hussin; Khairul Nizar, Ismail; Mohd Mustafa, Al Bakri Abdullah; Mohammed Amjad, Hussain (Praise Worthy Prize, 2013)
      The influence of curing time and curing temperature on properties of fly ash-based geopolymer bricks has been studied. The compressive strength and water absorption of geopolymer bricks were investigated which are produced ...

    • The effect of curing temperature on physical and chemical properties of geopolymers 

      Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussain; Khairul Nizar, Ismail; Zarina, Yahya; Rafiza, Abdul Razak (Elsevier BV, 2011)
      Fly ash-based geopolymers required heat to increase the geopolymerization process in order to obtain higher compressive strength. As such, geopolymer samples were prepared using different curing temperatures (room temperature, ...

    • The effect of curing time on the properties of fly ash-based geopolymer bricks 

      Wan Mastura, W. I.; Kamarudin, Hussin, Brig. Jen. Datuk Prof. Dr.; Khairul Nizar, Ismail, Prof. Madya Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohammed, Bnhussain (Scientific.Net/Trans Tech Publications, 2012-12)
      This paper reports the results of an experimental work conducted to investigate the effect of curing conditions on the properties of fly ash-based geopolymer bricks prepared by using fly ash as base material and combination ...

    • Effect of NaOH concentration on microstructure of boiler ash based geopolymer 

      Zarina, Yahya; Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Abdul Rahim, Abdul Razak (Trans Tech Publications Ltd., 2015)
      Boiler ash is one of the waste material from palm oil processing industry and it was widely available. The role of alkaline activator in geopolymer is important for its mechanical properties. NaOH and sodium silicate ...

    • Effect of Solids-To-Liquids, Na2SiO3-To-NaOH and Curing Temperature on the Palm Oil Boiler Ash (Si + Ca) Geopolymerisation System 

      Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Rafiza, Abd Razak; Sandu, Andrei Victor (MDPI AG, 2015)
      This paper investigates the effect of the solids-to-liquids (S/L) and Na2SiO3/NaOH ratios on the production of palm oil boiler ash (POBA) based geopolymer. Sodium silicate and sodium hydroxide (NaOH) solution were used as ...

    • Feasibility of producing wood fibre-reinforced geopolymer composites (WFRGC) 

      Mohd Mustafa Al Bakri, Abdullah; Mohd Izzat, Ahmad; Muhammad Faheem, Mohd Tahir; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Liyana, Jamaludin (Trans Tech Publications, 2013)
      Wood fibres have long been known as a fibre reinforcement for concrete. Due to its availability and low production cost, this natural fibre has been used in less developed country where conventional construction materials ...

    • Fire resistance evaluation of lightweight geopolymer concrete system exposed to elevated temperatures of 100-800 °C 

      Omar A., Abdulkareem; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2014)
      This paper reports the fire resistance property of a lightweight aggregate geopolymer concrete (LWAGC) material synthesized by the alkali-activation of locally source fly ash (FA) after exposed to elevated temperatures ...

    • Fly ash-based geopolymer lightweight concrete using foaming agent 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain; Khairul Nizar, Ismail, Prof. Madya Dr.; Zarina, Yahya; Rafiza, Abdul Razak (MDPI, Basel, Switzerland., 2012-06)
      In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium ...

    • Influence of dolomite on the mechanical properties of boiler ash geopolymer paste 

      Zarina, Yahya; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak (Trans Tech Publications, 2014)
      The waste material from palm oil industry has been increasing since Malaysia was the world largest exported of palm oil mill. The waste such as palm fibers, nut shells, palm kernel and empty fruit bunches are the solid ...

    • Investigating the possibility of utilization of kaolin and the potential of metakaolin to produce green cement for construction purposes-A review 

      Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Liew, Y. M.; Mohd Mustafa Al Bakri, Abdullah; Luqman, Musa, Dr.; Khairul Nizar, I.; Heah, Cheng Yong (INSInet Publication, 2011-09)
      Geopolymers are inorganic alkali aluminosilicate gels, formed from reaction of mineral clays or aluminosilicate-bearing industrial wastes, and treated with alkali silicate solution at 40-80°C. Geopolymers have been studied ...

    • Lightweight fly ash-based geopolymer concrete 

      Omar A., Abdulkareem; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Prof. Madya Dr. (Trans Tech Publications, 2013)
      The experiments of this study were preformed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) using normal sand as a fine aggregate and expanded clay as lightweight aggregate. The LWAGC ...

    • Mechanical performances of fly ash geopolymer bricks 

      Wan Mastura, Wan Ibrahim; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Prof. Madya Dr.; Mohd Mustafa Al Bakri, Abdullah (American Scientific Publishers, 2013-01)
      Geopolymer is a new class of three-dimensionally networked amorphous to semi-crystalline alumino-silicate materials, and first developed by Professor Davidovits in 1978. Geopolymers can be synthesized by mixing alumino-silicate ...

    • Microstructure study on optimization of high strength fly ash based geopolymer 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya (Trans Tech Publications, 2012)
      The compressive strength and microstructural characteristics of fly ash based geopolymer with alkaline activator solution were investigated. The sodium hydroxide and sodium silicate were mixed together to form an alkaline ...

    • Microstructure study on volcano ash geopolymer aggregate at different sintering temperature 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Djwantoro, Hardjito, Dr.; Wan Hamidon Wan Badaruzzaman, Ir. Dr.; Zarina, Yahya (Trans Tech Publications, 2014)
      Recent research shows that the by-product materials such as fly ash can be used as raw material in producing aggregates and lightweight aggregates. The usage of this material can improve the quality of the aggregates ...