Browsing Mohd Mustafa Al Bakri Abdullah, Prof. Dr. by Title

Now showing items 66-85 of 277

    • The effect of curing temperature on physical and chemical properties of geopolymers 

      Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussain; Khairul Nizar, Ismail; Zarina, Yahya; Rafiza, Abdul Razak (Elsevier BV, 2011)
      Fly ash-based geopolymers required heat to increase the geopolymerization process in order to obtain higher compressive strength. As such, geopolymer samples were prepared using different curing temperatures (room temperature, ...

    • The effect of curing time on the properties of fly ash-based geopolymer bricks 

      Wan Mastura, W. I.; Kamarudin, Hussin, Brig. Jen. Datuk Prof. Dr.; Khairul Nizar, Ismail, Prof. Madya Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohammed, Bnhussain (Scientific.Net/Trans Tech Publications, 2012-12)
      This paper reports the results of an experimental work conducted to investigate the effect of curing conditions on the properties of fly ash-based geopolymer bricks prepared by using fly ash as base material and combination ...

    • The Effect of Different Ratio Bottom Ash and Fly Ash Geopolymer Brick on Mechanical Properties for Non-loading Application 

      Laila Mardiah, Deraman; Mohd Mustafa Al Bakri, Abdullah; Liew, Yun Ming; Kamarudin, Hussin; Wan Mastura, Wan Ibrahim; Andrei Victor, Sandu (EDP Sciences, 2017)
      This paper studies the finding of strength and water absorption of geopolymer bricks using bottom ash and fly ash as a geopolymer raw material for non-loading application with minimum strength. The study has been conducted ...

    • Effect of different ratio of geopolymer paste based fly ash-metakaolin on compressive strength and water absorption 

      Nor Shida Dalila, Mohd Azhar; Farah Farhana, Zainal; Mohd Mustafa Al Bakri, Abdullah (IOP Publishing Ltd, 2019-12)
      This paper presents the effect of different solid to solid (S/S) ratio by mixing the fly ash and metakaolin as geopolymer paste on the compressive strength and water absorption. Fly ash is a waste materials produced by ...

    • Effect of fly ash/alkaline activator ratio and sodium silicate/NaoH ratio on fly ash geopolymer coating strength 

      Liyana, Jamaludin; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Azura, Abdul Rashid Assoc. Prof. (Trans Tech Publications, 2013)
      Fly ash geopolymer coating material potential used to protect surface used in exposure conditions. Ratio of fly ash/alkaline activator and Na₂SiO₃/NaOH play important parameter on determining the best flexural strength of ...

    • The effect of gap between plastic leaded chip carrier (PLCC) using computational fluid dynamic (CFD) software, FLUENT™ 

      Mazlan, Mohamed; Anizah, Kalam, Dr.; Nik Rosli, Abdullah, Dr.; Loo, Huck Soo, Prof. Madya Ir. Dr.; Mohd Mustafa Al Bakri, Abdullah; M. S., Abdul Aziz; Khor, C. Y.; Mohammad Amizi, Ayob; Mohd Sukhairi, Mat Rasat (AENSI Publisher All rights reserved, 2013-10)
      This paper presents the effect of gap between Plastic Leaded Chip Carrier (PLCC) by using three dimensional numerical analysis of heat and fluid flow in computer. 3D model of microprocessors is built using GAMBIT and ...

    • Effect of Glass Reinforced Epoxy (GRE) pipe filled with Geopolymer Materials for Piping Application: Compression Properties 

      Mohammad Firdaus, Abu Hashim; Mohd Mustafa, Al Bakri Abdullah; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin; Mohammed, Binhussain; Mohd Firdaus, Omar (EDP Sciences, 2016)
      The aim of this paper is to achieve the highest compressive strength of glass reinforced epoxy pipe with the geopolymer filler content of weight percentage that were used in glass reinforced epoxy pipe. The samples were ...

    • Effect of graphene oxide on microstructure and optical properties of TiO₂ thin film 

      Azliza, Azani; Dewi Suriyani, Che Halin; Kamrosni, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Mohd Fairul Sharin, Abdul Razak; Norsuria, Mahmed; Muhammad Mahyiddin, Ramli; Ayu Wazira, Azhari; Chobpattana, Varistha (IOP Publishing Ltd, 2019-12)
      GO/TiO₂ thin films have been synthesized from titanium (IV) isopropoxide (TTIP) by a sol-gel method. The films were deposited onto a glass substrate using spin coating deposition technique then were subjected to annealed ...

    • The Effect of High Temperature on Compression Strength of Geopolymer Paste 

      Ridho, Bayuaji; Sigit, Darmawan; Nur Ahmad, Husin; Boedi, Wibowo; Srie, Subekti; Januarti Jaya, Ekaputri; Mohd Mustafa Al Bakri, Abdullah; Totok, Ruki Biyanto (EDP Sciences, 2017-02)
      This research has a purpose to confirm the resistance of geopolymer concrete towards high temperature. This high temperature becomes the issues in material structure defense due to the danger of fire. Therefore, this ...

    • The effect of iron fillings waste contents on the attenuation level of anti-radiation shielding concrete 

      Ali Basheer, Azeez; Kahtan Sadiq, Muhammed, Dr.; Mohd Mustafa Al-Bakri, Abdullah; Azmi, Rahmat, Prof. (Trans Tech Publications, 2013)
      Shielding concretes of different iron filling contents were assessed for their anti radiation attenuation properties. The measurements have been performed by using gamma spectrometer of NaI (Tl) detector, the sources were ...

    • Effect of mechanical activation on kaolin-based geopolymers 

      Cheng, Yong Heah; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohammed, Hussain; Luqman, Musa; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Liew, Y. M. (Trans Tech Publications, 2012)
      Raw materials kaolin was subjected to mechanical modification; the effect of the mechanical activation of kaolin on the compressive strength and morphological properties of the geopolymers has been studied. Mechanical ...

    • Effect of mixing temperature on characteristics of thermoplastic potato starch film 

      Nurul Husna, Zakaria; Noorhafiza, Muhammad; Sandu, Andrei Victor; Mohd Mustafa Al Bakri, Abdullah (IOP Publishing Ltd, 2018-06)
      This study present the preparation of potato starch film with glycerol as a plasticizer through a solution casting technique. The effect of mixing temperature (80°C, 85°C, 90°C and 95°C) on the tensile and microstructure ...

    • Effect of NaOH concentration on microstructure of boiler ash based geopolymer 

      Zarina, Yahya; Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Abdul Rahim, Abdul Razak (Trans Tech Publications Ltd., 2015)
      Boiler ash is one of the waste material from palm oil processing industry and it was widely available. The role of alkaline activator in geopolymer is important for its mechanical properties. NaOH and sodium silicate ...

    • Effect of palm slag filler size on the mechanical and wear properties of brake pad composites 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (American Scientific Publishers, 2013-01)
      Particle size of filler and other material that involved in brake pad composites are expected to be able to strongly influence the wear properties and performance. Palm slag as a filler in brake pad was investigated in ...

    • Effect of pyrolysis temperature on the synthesis of carbon fiber from natural organic waste 

      Shahrizam, Saad; Faizul, Che Pa; Mohd Mustafa Al-Bakri, Abdullah; Ruhiyuddin, Mohd Zaki; Murizam, Darus (Trans Tech Publications, 2014)
      Carbon fibers are produced from natural sources of water hyacinth plants that have been dried, ground and sieved to three different particle sizes of 600 μm, 300 μm and less than 300 μm. Through the analysis of data obtained ...

    • Effect of sodium hydroxide molarity on physical, mechanical and thermal conductivity of metakaolin geopolymers 

      Nur Ain, Jaya; Liew, Yun-Ming; Mohd Mustafa Al Bakri, Abdullah; Heah, Cheng-Yong; Kamarudin, Hussin (IOP Publishing Ltd, 2018-03)
      In the present work, the effect of different sodium hydroxide (NaOH) molarity (6M, 8M, 10M, 12M and 14M) on the physical, mechanical and thermal conductivity of metakaolin geopolymers (MkGPs) was investigated. Geopolymers ...

    • Effect of solid to liquid ratio on heavy metal removal by geopolymer-based adsorbent 

      Nurliyana, Ariffin; Mohd Mustafa Al Bakri, Abdullah; Mohd Remy Rozainy, Mohd Arif Zainol; Baltatu, M. S.; Liyana, Jamaludin (IOP Publishing Ltd, 2018-06)
      Microstructure of three-dimensional aluminosilicate which similar to zeolite cause geopolymer based adsorbent accepted in the treatment of wastewater. This paper presents an investigation on the copper removal from the ...

    • Effect of solid-to-liquid ratio on thin fly ash geopolymer 

      Yong-Sing, Ng; Yun-Ming, Liew; Mohd Mustafa Al Bakri, Abdullah; Hui-Teng, Ng; Kamarudin, Hussin; Cheng Yong, Heah; Nurul Aida, Mohd Mortar; Sandu, Andrei Victor (IOP Publishing Ltd, 2020-02)
      The present work studies the effect of solid-to-liquid (S/L) ratio on the properties of thin fly ash-based geopolymer. The fly ash geopolymers with dimension of 160 mm × 40 mm × 10 mm were synthesised by using various S/L ...

    • Effect of Solids-To-Liquids, Na2SiO3-To-NaOH and Curing Temperature on the Palm Oil Boiler Ash (Si + Ca) Geopolymerisation System 

      Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Rafiza, Abd Razak; Sandu, Andrei Victor (MDPI AG, 2015)
      This paper investigates the effect of the solids-to-liquids (S/L) and Na2SiO3/NaOH ratios on the production of palm oil boiler ash (POBA) based geopolymer. Sodium silicate and sodium hydroxide (NaOH) solution were used as ...

    • The effect of thermal annealing on the microstructure and mechanical properties of Sn-0.7Cu-xZn solder joint 

      Mohd Izrul Izwan, Ramli; Mohd Arif Anuar, Mohd Salleh; Rita, Mohd Said; Mohd Mustafa Al Bakri, Abdullah; Dewi Suriyani, Che Halin; Norainiza, Saud; Nabiałek, Marcin (MDPI AG, 2021-02)
      The microstructural properties of a Pb-free solder joint significantly affect its mechanical behaviours. This paper details a systematic study of the effect of the annealing process on the microstructure and shear strength ...